应用运动追踪布里渊显微镜对正常、亚临床及圆锥角膜的三维力学表征
前瞻性横断面研究纳入50眼(对照20眼、亚临床圆锥角膜20眼、I或II期临床圆锥角膜10眼),用运动追踪布里渊显微镜评估角膜基质前、中、后层的力学参数。各组间所有布里渊指标均有显著差异,前部差异最大、后部最小;前部最小值完全区分亚临床和临床圆锥角膜与对照(AUC均为1.0)。
要点
- 运动追踪布里渊显微镜可检测正常角膜与亚临床或早期圆锥角膜之间的三维力学差异。
- 力学差异在前部基质最明显、后部基质最不明显。
- 前部最小值完全区分亚临床及临床圆锥角膜与对照眼(AUC均为1.0)。
核心结论
- 运动追踪布里渊显微镜识别出对照眼与亚临床或早期圆锥角膜之间的三维力学差异,差异在前部基质最明显、后部基质最不明显,提示亚临床圆锥角膜眼存在相关的轴向力学差异。
研究设计与样本
- 前瞻性横断面研究,共评估50例患者的50眼,包括对照20眼(20例)、亚临床圆锥角膜20眼(20例)和I或II期临床圆锥角膜10眼(10例)。
- 所有患者均接受Scheimpflug成像进行分组,并使用定制设备进行运动追踪布里渊显微镜力学评估。
- 在前部、中部和后部基质区域生成平均和最小运动追踪布里渊频移值。
- 对运动追踪布里渊指标生成受试者工作特征(ROC)曲线,确定各位置各变量的曲线下面积(AUROC)、敏感性和特异性。
主要发现
- 各组间年龄、性别和平均角膜曲率无显著差异。
- 对照、亚临床圆锥角膜和临床圆锥角膜组间所有运动追踪布里渊指标均有显著差异,前部最小值差异最大(Δ 43-57 MHz,P < .001)、前部平均值(Δ 34-37 MHz,P < .001)、中部最小值(Δ 44-69 MHz,P < .001)和中部平均值(Δ 39-54 MHz,P < .001)差异较大,后部最小值(Δ 15-22 MHz,P < .001)和后部平均值(Δ 20-32 MHz,P < .001)差异最小。
- 前部最小值完全区分亚临床圆锥角膜和临床圆锥角膜组与对照(AUC均为1.0)。
- 前部平均值(AUC = 0.98,1.0)、中部平均值(AUC = 0.96,1.0)和中部最小值(AUC = 0.94,1.0)表现优于后部平均值(AUC = 0.81,0.95)或后部最小值(AUC = 0.78,0.88)。
关键数值与推荐
- 前部最小值区分亚临床圆锥角膜与对照的AUC = 1.0,区分临床圆锥角膜与对照的AUC = 1.0。
- 前部平均值区分亚临床圆锥角膜与对照的AUC = 0.98,区分临床圆锥角膜与对照的AUC = 1.0。
- 中部平均值区分亚临床圆锥角膜与对照的AUC = 0.96,区分临床圆锥角膜与对照的AUC = 1.0。
- 中部最小值区分亚临床圆锥角膜与对照的AUC = 0.94,区分临床圆锥角膜与对照的AUC = 1.0。
- 后部平均值区分亚临床圆锥角膜与对照的AUC = 0.81,区分临床圆锥角膜与对照的AUC = 0.95;后部最小值区分亚临床圆锥角膜与对照的AUC = 0.78,区分临床圆锥角膜与对照的AUC = 0.88。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To characterize the 3-dimensional (3-D) mechanical differences between normal corneas and those with subclinical keratoconus (SKC) or clinical keratoconus (KC) using motion-tacking (MT) Brillouin microscopy. DESIGN: Prospective cross-sectional study. METHODS: There were 50 eyes from 50 patients evaluated, including 20 Control eyes from 20 patients, 20 SKC eyes from 20 patients, and 10 stage I or II KC eyes from 10 patients. All patients had Scheimpflug imaging for group classification and MT Brillouin microscopy using a custom-built device for mechanical evaluation. Mean and minimum MT Brillouin shift values were generated in the anterior, middle, and posterior stromal regions. Receiver operating characteristic (ROC) curves were generated for MT Brillouin metrics to determine the area under the ROC curve (AUROC), sensitivity, and specificity for each variable at each location. RESULTS: There were no significant differences between groups for age, sex, or mean keratometry. There were significant differences between control, SKC, and KC groups for all MT Brillouin metrics, with greatest differences in anterior min (Δ 43-57 MHz, P < .001) and Mean (Δ 34-37 MHz, P < .001), middle min (Δ 44-69 MHz, P < .001) and Mean (Δ 39-54 MHz, P < .001), and least differences in posterior min (Δ 15-22 MHz, P < .001) and Mean (Δ 20-32 MHz, P < .001). Anterior min values fully separated both SKC and KC groups from controls (AUC = 1.0 for each), while anterior mean (AUC = 0.98, 1.0), middle mean (AUC = 0.96, 1.0), and middle min (AUC = 0.94, 1.0) performed better than posterior mean (AUC = 0.81, 0.95) or posterior min (AUC = 0.78, 0.88). CONCLUSIONS: MT Brillouin microscopy identified 3-dimensional differences between controls eyes and those with subclinical or early-stage keratoconus. Differences were most pronounced in the anterior stroma and least pronounced in the posterior stroma, indicating relevant axial mechanical differences in eyes with SKC. NOTE: Publication of this article is sponsored by the American Ophthalmological Society.
引用
- Randleman JB, Zhang H, Hammoud B, et al. Three-Dimensional Mechanical Characterization of Normal, Subclinical, and Keratoconic Corneas Using Motion Tracking Brillouin Microscopy. Am J Ophthalmol. 2025. PMID: 40550450. doi:10.1016/j.ajo.2025.06.027
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。