数字导航与裂隙灯辅助角膜标记的一致性对比
该回顾性病例系列研究纳入143例(201只眼)白内障患者,比较手术导航系统自动角膜标记与裂隙灯辅助下手动角膜标记的一致性。结果显示自动标记与手动标记(中点)在水平子午线角度上一致性较好(ICC=0.88),但自动标记在居中径线偏移控制上显著优于手动标记(均值0.40 mm vs 2.24~2.35 mm,P<0.001),为散光矫正型人工晶状体植入的轴位精准定位提供依据。
要点
- 自动标记水平子午线角度绝对均值为2.45°,低于手动标记各方法(3.20°~4.76°,P<0.001)。
- 自动标记居中径线偏移均值0.40 mm,明显低于手动标记法(P<0.001)。
- 手动标记(中点)与自动标记水平子午线角度ICC为0.88,居中偏移ICC为-0.04。
核心结论
- 手术导航系统自动标记与裂隙灯辅助手动标记(中点)的水平子午线角度值具有较好一致性。
- 数字导航自动标记在引导人工晶状体位置居中的径线偏移控制方面显著优于手动方法,为散光矫正型人工晶状体植入中轴位的精准定位提供保证。
研究设计与样本
- 回顾性病例系列研究,连续收集2021年6月至2023年7月上海交通大学医学院附属第六人民医院眼科拟行超声乳化吸除白内障及人工晶状体植入术的患者资料。
- 共纳入143例(201只眼)白内障患者,年龄(60.27±19.13)岁,其中男性58例,女性85例。
- 所有患者先进行裂隙灯显微镜辅助下手动角膜印记标记,再行手术导航系统自动标记;手动标记组进一步分为手动标记(上-下缘)、手动标记(下-上缘)和手动标记(中点)亚组。
- 用图像处理软件计算4种标记方法的水平子午线角度及居中径线偏移程度,采用Bland-Altman法和组内相关系数(ICC)评价一致性。
主要发现
- 手动标记(上-下缘)、手动标记(下-上缘)、手动标记(中点)和自动标记的水平子午线角度绝对均值分别为3.61°、4.76°、3.20°、2.45°,差异有统计学意义(P<0.001)。
- 自动标记与3种手动标记方法在水平子午线角度上的差异均具有统计学意义(P<0.05)。
- 4种方法的居中径线偏移量均值分别为2.35、2.35、2.24和0.40 mm,差异有统计学意义(P<0.001)。
- 自动标记法居中径线偏移量明显低于手动标记法(P<0.001),而3种手动标记测量方法间差异无统计学意义(P>0.05)。
- 手动标记(中点)与自动标记的水平子午线角度ICC为0.88,居中径线偏移量ICC为-0.04,提示水平子午线角度一致性较好而居中偏移一致性较差。
关键数值与推荐
- 水平子午线角度绝对均值:手动标记(上-下缘)3.61°、手动标记(下-上缘)4.76°、手动标记(中点)3.20°、自动标记2.45°,组间差异P<0.001。
- 居中径线偏移量均值:手动标记(上-下缘)2.35 mm、手动标记(下-上缘)2.35 mm、手动标记(中点)2.24 mm、自动标记0.40 mm,组间差异P<0.001。
- 自动标记与手动标记法居中偏移量差异P<0.001;3种手动标记方法间差异P>0.05。
- 手动标记(中点)与自动标记水平子午线角度ICC=0.88;居中径线偏移量ICC=-0.04。
临床怎么用
- 手术导航系统自动标记与裂隙灯辅助手动标记(中点)在水平子午线角度上具有较好一致性。
- 数字导航自动标记在引导人工晶状体位置居中的径线偏移控制方面显著优于手动方法,为散光矫正型人工晶状体植入中轴位的精准定位提供保证。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Objective: To investigate the consistency between automatic corneal marking using a surgical navigation system and manual corneal marking assisted by a slit-lamp microscope. Methods: This was a retrospective case series study. Patient data from the Ophthalmology Outpatient Department of Shanghai Sixth People's Hospital, Shanghai Jiao Tong University School of Medicine, from June 2021 to July 2023 were continuously collected. All patients underwent manual corneal marking assisted by a slit-lamp microscope, followed by automatic marking using a surgical navigation system. Patients were divided into two groups: the manual marking group and the automatic marking group. The manual marking group was further divided into three subgroups based on the marking measurement methods: manual marking (upper to lower edge), manual marking (lower to upper edge), and manual marking (midpoint). The horizontal meridian angle and the deviation of the central axis were calculated for the four marking methods using the image processing software. Statistical differences among the measurement methods were compared, and the consistency was evaluated using the Bland-Altman plots and intraclass correlation coefficient (ICC). Results: A total of 143 cataract patients (201 eyes) were included in the study, with an average age of (60.27±19.13) years, including 58 males and 85 females. The absolute mean deviations of the horizontal meridian angle for manual marking (upper to lower edge), manual marking (lower to upper edge), manual marking (midpoint), and automatic marking were 3.61°, 4.76°, 3.20°, and 2.45°, respectively, with statistically significant differences among them (P<0.001). The differences between automatic marking and the three manual marking methods were also statistically significant (P<0.05). The mean deviations of the central axis were 2.35, 2.35, 2.24, and 0.40 mm, respectively, with statistically significant differences among them (P<0.001). The deviation of the automatic marking method was significantly lower than that of the manual marking methods (P<0.001), while no significant difference was observed between the three edge-based manual marking methods (P>0.05). The ICC for the horizontal meridian angle between manual marking (midpoint) and automatic marking was 0.88, while the ICC for the central axis deviation was -0.04, indicating good consistency in the horizontal meridian angle between manual marking (midpoint) and automatic marking, but poor consistency in the central axis deviation. Conclusions: The horizontal meridian angle values of automatic corneal marking using a surgical navigation system and manual corneal marking (midpoint) assisted by a slit-lamp microscope showed good consistency. However, digital navigation automatic marking demonstrated significantly better control in the centralization of the radial offset, providing a robust basis for accurate axis positioning during toric intraocular lens implantation. 目的: 探讨手术导航系统自动角膜标记与裂隙灯显微镜辅助下手动角膜印记标记的一致性。 方法: 回顾性病例系列研究。连续收集2021年6月至2023年7月于上海交通大学医学院附属第六人民医院眼科拟行超声乳化吸除白内障及人工晶状体植入术的患者资料。所有患者均先在裂隙灯显微镜辅助下进行手动角膜印记标记,再行手术导航系统自动标记,由此将患者分为手动标记组和自动标记组,手动标记组中依据角膜印记测量方式,进一步分为手动标记(上-下缘)、手动标记(下-上缘)和手动标记(中点)亚组。用图像处理软件分别对4种标记方法的水平子午线角度及居中径线的偏移程度进行计算。比较测量方法差异的统计学意义,并用Bland-Altman法及组内相关系数(ICC)评价测量方法间的一致性。 结果: 研究共纳入143例(201只眼)白内障患者,年龄(60.27±19.13)岁,其中男性58例,女性85例。手动标记(上-下缘)、手动标记(下-上缘)、手动标记(中点)和自动标记水平子午线角度绝对均值分别为3.61°、4.76°、3.20°、2.45°,差异有统计学意义(P<0.001),自动标记与手动标记3种测量方法间的差异均具有统计学意义(P<0.05)。居中径线偏移量的均值分别为2.35、2.35、2.24和0.40 mm,差异有统计学意义(P<0.001),自动标记法偏移量明显低于手动标记法,差异有统计学意义(P<0.001),而3种手动标记测量方法间差异无统计学意义(P>0.05)。手动标记(中点)与自动标记的水平子午线角度ICC为0.88,居中径线偏移量的ICC为-0.04,提示手动标记(中点)与自动标记的水平子午线角度的一致性较好,但在居中偏移的一致性较差。 结论: 手术导航系统自动标记与裂隙灯显微镜辅助下手动角膜印记标记(中点)的水平子午线角度值具有较好的一致性。然而,数字导航自动标记在引导人工晶状体位置居中方面显著优于手动方法,为散光矫正型人工晶状体植入中轴位的精准定位提供保证。.
引用
- Liu C, Wang MY, Zhang Y, et al. [Consistency between digital navigation and slit-lamp assisted corneal marking]. Zhonghua Yan Ke Za Zhi. 2025. PMID: 40484852. doi:10.3760/cma.j.cn112142-20240626-00282
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。