晶状体厚度与前房深度比值:汉族白内障患者房角宽度的生物测量决定因素
研究纳入400例汉族白内障患者,按眼轴长度分为短眼、中眼、中长眼和长眼四组,每组100例。采用Pentacam HR测量前房角宽度(ACAW),IOLMaster 700测量前房深度(ACD)和晶状体厚度(LT),定义ACAW<20度为窄房角。多变量线性模型显示LT/ACD比值是ACAW的最强决定因素(总组β=-0.71),多变量logistic分析显示LT/ACD比值较大与房角狭窄显著相关(OR=156.7,95%CI=10.8-2270.4),LT/ACD比值1.8可提示房角狭窄(AUC=0.94)。
要点
- LT/ACD比值是汉族白内障患者前房角宽度的最强决定因素(总组标准化回归系数β=-0.71)。
- LT/ACD比值较大与房角狭窄显著相关(OR=156.7,95%CI=10.8-2270.4)。
- LT/ACD比值1.8可提示房角狭窄(AUC=0.94)。
核心结论
- 在汉族白内障患者中,LT/ACD比值可作为前房角宽度的眼部生物测量决定因素。
- LT/ACD比值超过1.8可有效识别房角狭窄的存在。
研究设计与样本
- 研究纳入400例有晶状体眼的汉族白内障患者。
- 根据眼轴长度(AL)将眼分为短眼(AL<22 mm,n=100)、中眼(22≤AL<24 mm,n=100)、中长眼(24≤AL<26 mm,n=100)和长眼(AL≥26 mm,n=100)。
- 使用Pentacam HR测定前房角宽度(ACAW),使用IOLMaster 700测量前房深度(ACD)和晶状体厚度(LT)。
- 窄房角定义为ACAW<20度。
主要发现
- 多变量线性模型(包括LT/ACD比值、年龄、性别、AL、白到白、角膜曲率、中央角膜厚度和瞳孔直径)显示,LT/ACD比值是总组ACAW的最强决定因素(标准化回归系数β=-0.71)。
- LT/ACD比值是短眼(β=-0.71)、中眼(β=-0.69)、中长眼(β=-0.72)和长眼(β=-0.63)ACAW的最强决定因素。
- 在ACD<3.0 mm的眼(β=-0.51)或LT≥5.0 mm的眼(β=-0.64)中,LT/ACD比值仍为ACAW的最强决定因素。
- 多变量logistic分析显示,在总组中,较大的LT/ACD比值与房角狭窄的存在显著相关(比值比=156.7,95%置信区间=10.8-2270.4)。
- LT/ACD比值1.8可提示房角狭窄(曲线下面积=0.94)。
关键数值与推荐
- 窄房角定义为ACAW<20度。
- LT/ACD比值1.8可提示房角狭窄(AUC=0.94)。
- 多变量logistic分析中,LT/ACD比值较大与房角狭窄显著相关(OR=156.7,95%CI=10.8-2270.4)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: The purpose of this study was to individuate a novel ocular biometric index, the lens thickness-to-anterior chamber depth (LT/ACD) ratio, and identify its role in explaining anterior chamber angle width (ACAW) in Han Chinese patients with cataract. METHODS: We enrolled 400 patients with cataract with phakic eyes. According to the axial length (AL), the eyes were divided into short eyes (AL < 22 mm, n = 100), medium eyes (22 ≤ AL < 24 mm, n = 100), medium‒long eyes (24 ≤ AL < 26 mm, n = 100), and long eyes (AL ≥ 26 mm, n = 100). We used a Pentacam HR to determine ACAW and an IOLMaster 700 to measure ACD and LT. A narrow chamber angle was defined as an ACAW < 20 degrees. RESULTS: Using a multivariable linear model, which included the LT/ACD ratio, age, sex, AL, white-to-white, keratometry, central corneal thickness, and pupil diameter, the LT/ACD ratio was the strongest determinant of ACAW in the total group (standardized regression coefficient [β] = -0.71), short eyes (β = -0.71), medium eyes (β = -0.69), medium-long eyes (β = -0.72), and long eyes (β = -0.63). The LT/ACD ratio remained the strongest determinant of ACAW in eyes with an ACD < 3.0 mm (β = -0.51) or an LT ≥ 5.0 mm (β = -0.64). Multivariable logistic analysis revealed a significant association between a greater LT/ACD ratio and the presence of angle narrowness in the total group (odds ratio = 156.7, 95% confidence interval [CI] = 10.8-2270.4). An LT/ACD ratio of 1.8 could indicate angle narrowness (area under the curve = 0.94). CONCLUSIONS: In Han Chinese patients with cataract, the LT/ACD ratio can be used as an ocular biometric determinant of ACAW. An LT/ACD ratio exceeding 1.8 could effectively identify the presence of angle narrowness.
引用
- Miao A, Yang F, Chen T, et al. Lens Thickness-to-Anterior Chamber Depth Ratio: A Biometric Determinant of Chamber Angle Width in Han Chinese Cataract Patients. Invest Ophthalmol Vis Sci. 2025. PMID: 40111355. doi:10.1167/iovs.66.3.42
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。