文献速递青光眼

虹膜形态与生物力学因素对瞳孔散大过程中房角关闭的影响

Iris Morphological and Biomechanical Factors Influencing Angle Closure During Pupil Dilation.
PubMed 文献 · Invest Ophthalmol Vis Sci · 2024-01-01

该研究构建了1344个包含角膜、巩膜、晶状体和虹膜的有限元模型来模拟瞳孔散大,并改变前房深度、前房宽度、虹膜凸度、虹膜厚度、虹膜刚度和泊松比等参数。结果显示,虹膜厚度和凸度等形态学因素以及刚度和泊松比等生物力学行为对散瞳时虹膜变形方式至关重要,前房生物学测量值减小会进一步加剧房角关闭。

要点

  • 虹膜厚度和凸度等形态学因素以及刚度和泊松比等生物力学行为是散瞳时虹膜变形的关键影响因素。
  • 前房深度和前房宽度减小会进一步加剧瞳孔散大过程中的房角关闭。
  • 有限元模型分析可量化各参数对瞳孔散大后房角角度变化的影响。

核心结论

  • 虹膜形态(虹膜厚度和虹膜凸度)及其固有生物力学行为(刚度和泊松比)对瞳孔散大时虹膜的变形方式至关重要,前房生物学测量值(前房深度和前房宽度)减小会进一步加剧房角关闭。

研究设计与样本

  • 研究构建了1344个包含角膜、巩膜、晶状体和虹膜的有限元模型来模拟瞳孔散大。
  • 每个模型改变以下参数:前房深度2-4毫米、前房宽度10-12毫米、虹膜凸度0-0.3毫米、虹膜厚度0.3-0.5毫米、刚度4-24千帕、泊松比0-0.3。
  • 评估每个参数从基线到散瞳后的角度变化(△∠)和最终散瞳角度(∠f)。

主要发现

  • 最终散瞳角度随前房深度减小从53.4°±12.3°降至21.3°±14.9°,随前房宽度减小从48.2°±13.5°降至26.2°±18.2°。
  • 最终散瞳角度随虹膜厚度增大从52.6°±12.3°降至24.4°±15.1°,随虹膜凸度增大从45.0°±19.2°降至33.9°±16.5°。
  • 最终散瞳角度随刚度增大从40.3°±17.3°降至37.4°±19.2°,随泊松比增大从42.7°±17.7°降至34.2°±18.1°。
  • 角度变化量随前房深度增大从9.37°±11.1°增至15.4°±9.3°,随前房宽度减小从7.4°±6.8°增至16.4°±11.5°。
  • 角度变化量随虹膜厚度增大从5.3°±7.1°增至19.3°±10.2°,随虹膜凸度减小从5.4°±8.2°增至19.5°±10.2°,随刚度增大从10.9°±12.2°增至13.1°±8.8°,随泊松比增大从8.1°±9.4°增至16.6°±10.4°。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

PURPOSE: To use finite element (FE) analysis to assess what morphologic and biomechanical factors of the iris and anterior chamber are more likely to influence angle narrowing during pupil dilation. METHODS: The study consisted of 1344 FE models comprising the cornea, sclera, lens, and iris to simulate pupil dilation. For each model, we varied the following parameters: anterior chamber depth (ACD = 2-4 mm) and anterior chamber width (ACW = 10-12 mm), iris convexity (IC = 0-0.3 mm), iris thickness (IT = 0.3-0.5 mm), stiffness (E = 4-24 kPa), and Poisson's ratio (v = 0-0.3). We evaluated the change in (△∠) and the final dilated angles (∠f) from baseline to dilation for each parameter. RESULTS: The final dilated angles decreased with a smaller ACD (∠f = 53.4° ± 12.3° to 21.3° ± 14.9°), smaller ACW (∠f = 48.2° ± 13.5° to 26.2° ± 18.2°), larger IT (∠f = 52.6° ± 12.3° to 24.4° ± 15.1°), larger IC (∠f = 45.0° ± 19.2° to 33.9° ± 16.5°), larger E (∠f = 40.3° ± 17.3° to 37.4° ± 19.2°), and larger v (∠f = 42.7° ± 17.7° to 34.2° ± 18.1°). The change in angles increased with larger ACD (△∠ = 9.37° ± 11.1° to 15.4° ± 9.3°), smaller ACW (△∠ = 7.4° ± 6.8° to 16.4° ± 11.5°), larger IT (△∠ = 5.3° ± 7.1° to 19.3° ± 10.2°), smaller IC (△∠ = 5.4° ± 8.2° to 19.5° ± 10.2°), larger E (△∠ = 10.9° ± 12.2° to 13.1° ± 8.8°), and larger v (△∠ = 8.1° ± 9.4° to 16.6° ± 10.4°). CONCLUSIONS: The morphology of the iris (IT and IC) and its innate biomechanical behavior (E and v) were crucial in influencing the way the iris deformed during dilation, and angle closure was further exacerbated by decreased anterior chamber biometry (ACD and ACW).

来源:Invest Ophthalmol Vis Sci,查看原文。版权归原作者所有。

引用

  1. Tan RKY, Ng GY, Tun TA, et al. Iris Morphological and Biomechanical Factors Influencing Angle Closure During Pupil Dilation. Invest Ophthalmol Vis Sci. 2024. PMID: 39230993. doi:10.1167/iovs.65.11.7

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。