圆锥角膜患者父母角膜断层扫描与生物力学特征研究
前瞻性队列研究纳入44例圆锥角膜患者及其亲生父母88人,并与84名年龄性别匹配的健康成人对照,比较Pentacam断层扫描与Corvis ST生物力学指标。患者父母的角膜更薄且生物力学参数改变(P < .05),联合断层与生物力学指数受试者工作特征曲线下面积为0.785、特异度84.5%,识别子代圆锥角膜准确率73.3%。
要点
- 患者父母角膜更薄、生物力学参数改变,与健康对照相比差异有统计学意义(P < .05)。
- 联合断层与生物力学指数受试者工作特征曲线下面积0.785,特异度84.5%。
- 父母断层与生物力学指数、Corvis生物力学指数及最薄点厚度是子代圆锥角膜的主要影响因素,识别准确率73.3%。
核心结论
- 圆锥角膜患者父母的角膜断层与生物力学特征提示可能存在圆锥角膜易感性。
- 断层扫描联合角膜生物力学可能有助于预测亚临床圆锥角膜患者子代的圆锥角膜发生率。
研究设计与样本
- 前瞻性队列研究,在山东第一医科大学青岛眼科医院开展。
- 研究组为44例圆锥角膜患者及其亲生父母88人;对照组为84名年龄和性别匹配的健康成人;每名受试者检查双眼,选取1眼进行统计分析。
- 排除标准为患青光眼、有眼部手术史、患已知影响眼睛的系统性疾病或检查配合不佳者;检查前要求停戴软性接触镜2周、硬性透气性接触镜4周。
- 检查包括Pentacam Scheimpflug断层扫描、Corvis ST、视力、屈光检查、眼轴长度和裂隙灯检查;至少1眼符合圆锥角膜表现者判定为圆锥角膜。
- 共采集9项Pentacam指标与21项生物力学指标,采用多重比较和二元logistic回归分析其与圆锥角膜的关联。
主要发现
- 来自2个不同家庭的2名父母(2.27%)被诊断为圆锥角膜。
- 与健康对照相比,圆锥角膜患者父母的角膜更薄且角膜生物力学参数改变(P < .05)。
- 联合断层与生物力学指数的判别能力最高,受试者工作特征曲线下面积为0.785,特异度为84.5%。
- logistic回归分析显示,父母角膜断层与生物力学指数、Corvis生物力学指数和最薄点厚度是子代圆锥角膜的主要影响因素,识别圆锥角膜子代的准确率为73.3%。
关键数值与推荐
- 诊断标准:至少1眼出现圆锥角膜表现者归类为圆锥角膜。
- 共采集9项Pentacam断层指标,包括平坦/陡峭子午线角膜曲率(K1/K2)、最大角膜曲率(Kmax)、最薄点角膜厚度(TP)、最大/平均Ambrósio关系厚度(ARTmax/ARTave)、角膜前/后表面高度(Ef/Eb)和总偏差值(Final D),以及21项生物力学指标。
- 联合断层与生物力学指数的受试者工作特征曲线下面积为0.785,特异度为84.5%。
- 识别子代圆锥角膜的准确率为73.3%。
- 父母中圆锥角膜检出2例,占2.27%。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To investigate the hereditability of corneal tomographic and biomechanical parameters in keratoconus (KC). DESIGN: Prospective cohort study. METHODS: This study was conducted at Qingdao Eye Hospital of Shandong First Medical University in Qingdao, China. Forty-four patients with KC and their biological parents (n = 88) were recruited as the study group. The control group consisted of 84 healthy adults with matched age and gender. Both eyes of each participant underwent clinical examinations, and 1 eye was selected for statistical analysis. Exclusion criteria were as follows: individuals with glaucoma, ocular surgery, systemic diseases known to affect the eyes, or poor cooperation during examination. Subjects were asked to discontinue soft contact lens (CL) wear for 2 weeks and rigid gas permeable CL wear for 4 weeks before ocular examination. All participants underwent a comprehensive assessment including Pentacam Scheimpflug tomography, Corvis ST, visual acuity, refraction examination, axial length, and slitlamp examination for both eyes. Individuals presenting with KC manifestations in at least 1 eye were classified as having KC. A total of 9 Pentacam indices including keratometry in the flat/steep meridian (K1/K2), maximal keratometry (Kmax), thinnest point pachymetry (TP), and maximum/average Ambrósio relational thickness (ARTmax/ARTave), anterior and posterior surfaces elevation of the cornea (Ef/Eb) and total deviation value (Final D), and 21 biomechanical indices were collected. Associations of these factors with KC were evaluated using multiple comparison and binary logistics regression analyses. RESULTS: Two parents (2.27%) from 2 different families were diagnosed with KC. Parents of patients with KC had thinner corneas with altered corneal biomechanical parameters compared with healthy controls (P < .05). The combined tomographic and biomechanical index demonstrated the highest discriminatory power (area under the receiver operating characteristic curve 0.785) and strong specificity (84.5%). Parental corneal tomographic and biomechanical index, Corvis biomechanical index, and TP were identified as the major influential factors for KC in their offspring by logistic regression analysis, with a 73.3% accuracy in identifying offspring with KC. CONCLUSIONS: Parental corneal tomographic and biomechanical properties of patients with KC suggest a possible predisposition to KC. A combination of tomography and corneal biomechanics can be helpful in predicting the incidence rate of KC in the offspring of patients with subclinical KC.
引用
- Li J, Zhang BN, Jhanji V, et al. Parental Corneal Tomographic and Biomechanical Characteristics of Patients With Keratoconus. Am J Ophthalmol. 2023. PMID: 37567431. doi:10.1016/j.ajo.2023.08.004
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。