文献速递核素与放射性配体治疗放射性药物与辐射防护

天然钛金属与二氧化钛靶的加速器生产及分离钪放射性核素

Cyclotron Production and Separation of Scandium Radionuclides from Natural Titanium Metal and Titanium Dioxide Targets.
PubMed 文献 · J Nucl Med · 2020-07-03

该研究利用24 MeV回旋加速器,通过质子诱导天然钛核反应生产钪-43、钪-44和钪-47,采用NH4HF2和HCl密闭消解及离子交换色谱纯化,钛靶材料经氨水碱沉淀回收。结果显示钛箔和TiO2平均消解效率分别为98%±3%和95%±1%,钪平均回收率94%±3%,钛回收率分别为初始质量的108%±8%和104%±5%。结论为该方法可用于天然或富集TiO2靶材料的稳健回旋加速器生产。

要点

  • 24 MeV回旋加速器质子辐照天然钛可生产43Sc、44Sc和47Sc。
  • 钛箔与TiO2平均消解效率分别为98%±3%与95%±1%,钪平均回收率94%±3%。
  • 钛靶材料经氨水碱沉淀回收,回收率分别为初始质量的108%±8%与104%±5%。

核心结论

  • 该工作展示了可用于天然或富集TiO2靶材料的稳健回旋加速器生产钪放射性核素的方法。

研究设计与样本

  • 研究使用24 MeV回旋加速器,通过质子诱导天然钛核反应生产43Sc、44Sc和47Sc,采用铝、铌和钽靶架装载钛箔与压制的TiO2。

主要发现

  • 钛箔和TiO2的平均消解效率分别为98%±3%和95%±1%,钛箔典型消解时间45 min,TiO2为75 min。
  • 钪的平均回收率为94%±3%。
  • 消解后钛箔和TiO2经沉淀为TiO2后的平均钛回收率分别为初始质量的108%±8%和104%±5%。

关键数值与推荐

  • 辐照靶用NH4HF2和HCl在密闭全氟烷氧基烷烃容器中90 min内消解。
  • 钪放射性核素使用支链N,N,N',N'-四-2-乙基己基二甘醇酰胺离子交换色谱纯化。
  • 钛靶材料通过氨水碱沉淀回收。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Theranostic strategies involve select radionuclides that allow diagnostic imaging and tailored radionuclide therapy in the same patient. An example of a Food and Drug Administration-approved theranostic pair is the 68Ga- and 177Lu-labeled DOTATATE peptides, which are used to image neuroendocrine tumors, predict treatment response, and treat disease. However, when using radionuclides of 2 different elements, differences in the pharmacokinetic and pharmacodynamic profile of the agent can occur. Theranostic agents that incorporate the matched-pair radionuclides of scandium-43Sc/47Sc or 44Sc/47Sc-would guarantee identical chemistries and pharmacologic profiles. The aim of this study was to investigate production of 43,44,47Sc via proton-induced nuclear reactions on titanium nuclei using a 24-MeV cyclotron. Methods: Aluminum, niobium, and tantalum target holders were used with titanium foils and pressed TiO2 to produce scandium radionuclides with proton energies of up to 24 MeV. Irradiated targets were digested using NH4HF2 and HCl in a closed perfluoroalkoxy alkane vessel in 90 min. Scandium radionuclides were purified via ion-exchange chromatography using branched N,N,N',N'-tetra-2-ethylhexyldiglycolamide. The titanium target material was recovered via alkali precipitation with ammonia solution. Results: Titanium foil and TiO2 were digested with an average efficiency of 98% ± 3% and 95% ± 1%, respectively. The typical digestion time was 45 min for titanium foil and 75 min for TiO2 The average scandium recovery was 94% ± 3%, and the average titanium recoveries from digested titanium foil and TiO2 after precipitation as TiO2 were 108% ± 8% and 104% ± 5% of initial mass, respectively. Conclusion: This work demonstrated a robust method for the cyclotron production of scandium radionuclides that could be used with natural or enriched TiO2 target material.

来源:J Nucl Med,查看原文。版权归原作者所有。

引用

  1. Loveless CS, Blanco JR, Diehl GL, et al. Cyclotron Production and Separation of Scandium Radionuclides from Natural Titanium Metal and Titanium Dioxide Targets. J Nucl Med. 2020. PMID: 32620699. doi:10.2967/jnumed.120.242941

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。