文献速递肿瘤 PET/CT放射性药物与辐射防护

TurBO工具箱实现长轴视野PET图像自动处理与动力学建模

Automated long axial field of view PET image processing and kinetic modelling with the TurBO toolbox.
PubMed 文献 · Eur J Nucl Med Mol Imaging · 2026-01-31

该研究介绍开源分析流程TurBO,用于长轴视野(LAFOV)PET数据的自动预处理与动力学建模。用21例[15O]H2O和16例[18F]FDG扫描数据验证,模型拟合质量高,自动与手动输入函数及ROI一致性良好,运动校正影响小,可减少人工工作量并实现标准化定量。

要点

  • TurBO可全自动完成LAFOV PET的配准、运动校正、CT分割ROI、IDIF提取和动力学建模。
  • 模型拟合质量高:区域和体素水平R²>[15O]H2O 0.83、[18F]FDG 0.99。
  • 自动与手动IDIF及ROI一致性良好,偏差小,运动校正对估计影响有限。

核心结论

  • TurBO流程为LAFOV PET数据提供全自动且可靠的定量分析,显著减少人工工作量并支持标准化可重复的器官灌注与代谢评估。

研究设计与样本

  • 研究采用开源分析流程TurBO,在Biograph Vision Quadra LAFOV PET/CT数据上验证,纳入21例[15O]H2O和16例[18F]FDG扫描受试者。

主要发现

  • 模型拟合在区域和体素水平均显示高质量,[15O]H2O的R²>0.83,[18F]FDG的R²>0.99。
  • 自动与手动IDIF一致性良好,[15O]H2O的R²>0.74、偏差<4%,[18F]FDG的R²>0.78、偏差<10%。
  • 手动与CT分割ROI高度一致,[15O]H2O的R²>0.82,[18F]FDG的R²>0.83。
  • 与未校正数据相比,运动校正对估计值影响较小,[15O]H2O的R²>0.71,[18F]FDG的R²>0.78。

关键数值与推荐

  • 使用6个CT分割ROI评估组织灌注与葡萄糖代谢:皮层脑灰质、左侧髂腰肌、右肾皮质与髓质、胰腺、脾和肝。

临床怎么用

  • 核医学科可利用TurBO对LAFOV PET数据进行自动预处理和动力学建模,减少手动操作并提高定量分析的可重复性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

PURPOSE: Long axial field of view (LAFOV) PET imaging requires extensive automation due to the large number of target tissues. Therefore, we introduce an open-source analysis pipeline (TurBO, Turku total-BOdy) for automated preprocessing and kinetic modelling of LAFOV [15O]H2O and [18F]FDG PET data. TurBO enables efficient, reproducible quantification of tissue perfusion and metabolism at regional- and voxel-levels through automated co-registration, motion correction, CT-based region of interest (ROI) segmentation, image-derived input function (IDIF) extraction, and region-specific kinetic modelling. METHODS: The pipeline was validated with Biograph Vision Quadra (Siemens Healthineers) LAFOV PET/CT data from 21 subjects scanned with [15O]H2O and 16 subjects scanned with [18F]FDG. Six CT-segmented ROIs (cortical brain gray matter, left iliopsoas muscle, right kidney cortex and medulla, pancreas, spleen and liver) were used to assess different levels of tissue perfusion and glucose metabolism. RESULTS: Model fits showed high quality with consistent estimates at regional and voxel-levels (R2 > 0.83 for [15O]H2O, R2 > 0.99 for [18F]FDG). Manual and automated IDIFs were in concordance (R2 > 0.74 for [15O]H2O, and R2 > 0.78 for [18F]FDG) with minimal bias (< 4% and < 10%, respectively). Manual and CT-segmented ROIs showed strong agreement (R2 > 0.82 for [15O]H2O and R2 > 0.83 for [18F]FDG). Motion correction had little impact on estimates (R2 > 0.71 for [15O]H2O and R2 > 0.78 for [18F]FDG) compared with uncorrected data. CONCLUSION: The TurBO pipeline provides fully automated and reliable quantification for LAFOV PET data. It substantially reduces manual workload and enables standardized, reproducible assessment of inter-organ perfusion and metabolism.

来源:Eur J Nucl Med Mol Imaging,查看原文。版权归原作者所有。

引用

  1. Tuisku J, Palonen S, Kärpijoki H, et al. Automated long axial field of view PET image processing and kinetic modelling with the TurBO toolbox. Eur J Nucl Med Mol Imaging. 2026. PMID: 41617887. doi:10.1007/s00259-026-07769-7

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。