OpenDose3D:免费开源的临床患者特异性剂量学软件
本文介绍开源软件OpenDose3D(OD3D),基于3D Slicer平台扩展,用于核医学图像的患者特异性剂量学计算。软件实现多种临床剂量学工作流程并导出中间结果,便于比较不同剂量学方法。体模验证显示校准和器官剂量学偏差小于3%,SNMMI剂量挑战数据(患者A)结果与报告值的绝对z评分小于1。
要点
- OD3D免费开源,基于3D Slicer平台扩展三个模块。
- 体模验证显示校准和器官剂量学偏差小于3%。
- SNMMI剂量挑战患者A数据结果绝对z评分小于1。
核心结论
- OpenDose3D是免费开源的研究工具,可用于临床剂量学、专业教育和基准测试学术或商业剂量学软件。
研究设计与样本
- OD3D基于3D Slicer平台开发,新增校准模块、基于3种算法的吸收剂量率图像计算模块、时间依赖变量拟合与积分模块。
- 使用MRTDosimetry项目体模数据和2021 SNMMI剂量挑战数据集图像数据进行测试。
主要发现
- 体模验证显示校准和器官剂量学与参考值偏差小于3%。
- 肿瘤 compartment 的吸收剂量差异归因于药代动力学建模。
- 使用SNMMI剂量挑战数据(患者A)的OD3D结果在3项任务中与报告值一致,绝对z评分小于1。
关键数值与推荐
- 体模验证:校准和器官剂量学偏差小于3%。
- SNMMI剂量挑战患者A:3项任务的绝对z评分小于1。
临床怎么用
- 可用于临床剂量学计算,支持多种工作流程并导出中间结果以便比较不同方法。
- 可作为教育工具和基准测试学术或商业临床剂量学软件的研究工具。
局限性
- 肿瘤 compartment 的吸收剂量差异归因于药代动力学建模。
- OD3D为研究工具,尚未经大规模临床验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Software tools for nuclear medicine dosimetry are becoming available. Yet, it is difficult to compare clinical dosimetry workflows implemented in academic or commercial software tools, and this limits the emergence of a standardized clinical dosimetry practice. This article introduces OpenDose3D (OD3D), an open-source software designed to provide image-based, patient-specific dosimetry in nuclear medicine. OD3D implements multiple clinical dosimetry workflows and exports intermediate results, enabling comparison between various dosimetry approaches. Methods: OD3D was developed as an extension of the 3D Slicer platform that already presents several components adapted to nuclear medicine imaging. Three additional modules were created: a calibration module for deriving sensitivity factors and recovery coefficients for partial-volume effect correction, a module for calculating absorbed dose rate images based on 3 algorithms, and a module for fitting and integrating time-dependent variables (activity or absorbed dose rates). The software was tested against phantom data from the MRTDosimetry project and image data from the 2021 SNMMI Dosimetry Challenge dataset. Results: The phantom-based validation process showed excellent agreement (deviations <3%) with the reference values for calibration and organ dosimetry. For the tumor compartment, the difference in absorbed doses was attributed to pharmacokinetic modeling. The OD3D results using data from the SNMMI Dosimetry Challenge (patient A) were consistently close to the reported values for the 3 proposed tasks: absolute z score was less than 1. Conclusion: The OpenDose collaboration provides free dosimetry tools and data to the community. The OD3D software is a research tool that can be used for clinical dosimetry, to educate professionals, and to benchmark available academic or commercial clinical dosimetry software tools.
引用
- Fragoso-Negrín JA, Vergara-Gil A, Rahman Hakim A, et al. OpenDose3D: A Free, Open-Source Clinical Dosimetry Software for Patient-Specific Dosimetry. J Nucl Med. 2026. PMID: 40998727. doi:10.2967/jnumed.125.269539
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。