PET赋能双能CT成像的可行性:首个体模与初步患者研究结果
本研究提出一种利用传统PET/CT扫描仪、无需改变硬件或增加辐射剂量的PET赋能双能CT(DECT)方法,通过最大似然衰减与活度(MLAA)方法从飞行时间PET数据重建511 keV的γ射线CT(gCT)图像,并与低能X射线CT图像组合进行物质分解。在首个体模和患者研究中,核MLAA方法较标准MLAA显著提高图像质量,PET赋能DECT生成的分数图像与X射线DECT高度相关(R>0.99)。应用研究提示该方法有潜力表征骨病灶,结论认为该方法用于CT成像和物质分解具有可行性,结果有望与X射线DECT媲美。
要点
- 核MLAA较标准MLAA显著提高gCT图像质量。
- 体模与患者研究中PET赋能DECT与X射线DECT分数图像相关系数R>0.99。
- 应用研究提示PET赋能DECT有潜力表征骨病灶。
核心结论
- 本研究结果证明该PET赋能方法用于CT成像和物质分解具有可行性。
- PET赋能DECT有潜力提供与X射线DECT相当的结果。
研究设计与样本
- 本研究为首次物理体模与患者数据评估,采用PET赋能DECT方法。
- 该方法从飞行时间PET数据以最大似然衰减与活度(MLAA)方法重建511 keV的γ射线CT(gCT)图像,再与低能X射线CT图像组合形成双能图像对进行物质分解。
- 开发了以X射线CT作为先验信息的核MLAA方法以改善gCT图像质量,并开发了通用的开源gCT重建实现。
- 以X射线DECT为参考进行比较,并在另一项患者研究中应用该方法评估骨病灶。
主要发现
- 与标准MLAA相比,核MLAA结果显示出显著改善的图像质量。
- 采用核MLAA的PET赋能DECT生成的分数图像与X射线DECT相当,体模研究和人体研究均显示高相关系数(R>0.99)。
- 应用研究提示PET赋能DECT有潜力表征骨病灶。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: Dual-energy (DE) CT enables material decomposition by using two different x-ray energies and may be combined with PET for improved multimodality imaging. However, this increases radiation dose and may require a hardware upgrade due to the added second x-ray CT scan. The recently proposed PET-enabled DECT method allows dual-energy imaging using a conventional PET/CT scanner without the need to change scanner hardware or increase radiation exposure. Here we demonstrate the first-time physical phantom and patient data evaluation of this method. METHODS: The PET-enabled DECT method reconstructs a gamma-ray CT (gCT) image at 511 keV from the time-of-flight PET data with the maximum-likelihood attenuation and activity (MLAA) approach and then combines this image with the low-energy x-ray CT images to form a dual-energy image pair for material decomposition. To improve the image quality of gCT, a kernel MLAA method was developed using the x-ray CT as a priori information. Here we developed a general open-source implementation for gCT reconstruction and used this implementation for the first real data validation using both physical phantom study and human-subject study. Results from PET-enabled DECT were compared using x-ray DECT as the reference. Further, we applied the PET-enabled DECT method in another patient study to evaluate bone lesions. RESULTS: Compared to the standard MLAA, results from the kernel MLAA showed significantly improved image quality. PET-enabled DECT with the kernel MLAA was able to generate fractional images that were comparable to the x-ray DECT, with high correlation coefficients for both the phantom study and human subject study (R > 0.99). The application study also indicates that PET-enabled DECT has potential to characterize bone lesions. CONCLUSION: Results from this study have demonstrated the feasibility of this PET-enabled method for CT imaging and material decomposition. PET-enabled DECT shows promise to provide comparable results to x-ray DECT.
引用
- Zhu Y, Li S, Xie Z, et al. Feasibility of PET-enabled dual-energy CT imaging: First physical phantom and initial patient study results. Eur J Nucl Med Mol Imaging. 2024. PMID: 39549045. doi:10.1007/s00259-024-06975-5
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。