文献速递核素与放射性配体治疗放射性药物与辐射防护

利用电镀铊靶优化高纯度铅-203生产的方法

Optimized Methods for the Production of High-Purity 203Pb Using Electroplated Thallium Targets.
PubMed 文献 · J Nucl Med · 2023-08-31

本研究旨在优化利用电镀铊靶生产与分离高比活度铅-203(203Pb)的方法,并研究以DO3A为螯合剂、VMT-α-NET为靶向载体的放射性化学优化。电镀靶以76-114 mg/cm²的高镀密度制备,分离回收率超过90%,平均比活度为37.7 ± 5.4 GBq/μmol(1.1 ± 0.1 Ci/μmol)。作者结论为开发了适用于回旋加速器辐照的铊靶电镀方法及简单快速、高回收率和高纯度的常规203Pb分离方法。

要点

  • 电镀铊靶镀密度达76-114 mg/cm²,电镀时间5 h。
  • 分离回收率超过90%,平均比活度37.7 ± 5.4 GBq/μmol(1.1 ± 0.1 Ci/μmol)。
  • 最终洗脱液为400 μL 1 M HCl,适合放射性标记。

核心结论

  • 作者结论为开发了一种高效电镀方法制备适用于回旋加速器辐照的铊靶,并建立了简单快速、高回收率和高纯度的常规203Pb分离方法。

研究设计与样本

  • 本研究为方法学研究,通过电镀天然或富集(205Tl)铊金属制备靶,用扫描电子显微镜测定电镀靶的结构与元素组成。
  • 靶以24 MeV质子、不同电流和束流时间辐照以考察靶耐久性,203Pb经铅树脂萃取柱及弱阳离子交换树脂第二柱纯化,以[203Pb]PbCl2形式洗脱。
  • 采用电感耦合等离子体质谱进一步表征分离对痕量金属污染物的去除,并研究DO3A螯合剂和VMT-α-NET的放射性标记效率。

主要发现

  • 电镀靶以76-114 mg/cm²的高镀密度制备,电镀时间为5 h。
  • 建立了可重复的分离方法,最终以400 μL 1 M HCl洗脱,适合放射性标记。
  • 回收率超过90%,平均比活度为37.7 ± 5.4 GBq/μmol(1.1 ± 0.1 Ci/μmol)。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

203Pb is a surrogate imaging match for 212Pb. This elementally matched pair is emerging as a suitable pair for imaging and targeted radionuclide therapy in cancer care. Because of the half-life (51.9 h) and low-energy γ-rays emitted, 203Pb is suitable for the development of diagnostic radiopharmaceuticals. The aim of this work was to optimize the production and separation of high-specific-activity 203Pb using electroplated thallium targets. We further investigated the radiochemistry optimization using a suitable chelator, tetraazacyclododecane-1,4,7-triacetic acid (DO3A), and targeting vector, VMT-α-NET (lead-specific chelator conjugated to tyr3-octreotide via a polyethylene glycol linker). Methods: Targets were prepared by electroplating of natural or enriched (205Tl) thallium metal. Scanning electron microscopy was performed to determine the structure and elemental composition of electroplated targets. Targets were irradiated with 24-MeV protons with varying current and beam time to investigate target durability. 203Pb was purified from the thallium target material using an extraction resin (lead resin) column followed by a second column using a weak cation-exchange resin to elute the lead isotope as [203Pb]PbCl2 Inductively coupled plasma mass spectrometry studies were used to further characterize the separation for trace metal contaminants. Radiolabeling efficiency was also investigated for DO3A chelator and VMT-α-NET (a peptide-based targeting conjugate). Results: Electroplated targets were prepared at a high plating density of 76-114 mg/cm2 using a plating time of 5 h. A reproducible separation method was established with a final elution in HCl (400 μL, 1 M) suitable for radiolabeling. Greater than 90% recovery yields were achieved, with an average specific activity of 37.7 ± 5.4 GBq/μmol (1.1 ± 0.1 Ci/μmol). Conclusion: An efficient electroplating method was developed to prepare thallium targets suitable for cyclotron irradiation. A simple and fast separation method was developed for routine 203Pb production with high recovery yields and purity.

来源:J Nucl Med,查看原文。版权归原作者所有。

引用

  1. Saini S, Bartels JL, Appiah JK, et al. Optimized Methods for the Production of High-Purity 203Pb Using Electroplated Thallium Targets. J Nucl Med. 2023. PMID: 37652545. doi:10.2967/jnumed.123.265976

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。