三维建模在开放血管与血管内神经外科培训、模拟和手术规划中的应用:系统综述
该系统综述检索PubMed数据库,纳入27篇关于三维打印在神经血管与血管内手术中用于住院医师培训、手术模拟或术前规划的研究。立体光刻是最常用制作方法,平均每模型制造成本624.83美元。结论认为三维打印模型解剖准确,有助于住院医师学习和手术规划,随着成本降低可更广泛补充培训。
要点
- 三维打印模型在开放血管与血管内神经外科中解剖准确,可用于住院医师培训和术前规划。
- 平均每模型制造成本624.83美元,成本下降后有望更广泛应用。
核心结论
- 三维打印生成的模型解剖准确,有助于住院医师学习和开放血管与血管内神经外科的手术规划。
- 随着打印方法进步和制造成本降低,该工具可能在直接接触病例有限的领域更广泛地补充培训。
研究设计与样本
- 系统综述,系统检索PubMed数据库,关键词涉及三维打印与神经血管或血管内手术。
- 手动筛选聚焦于住院医师培训、手术模拟或术前规划的文章,共纳入27篇。
- 收集制作方法、材料、成本和验证措施等信息。
主要发现
- 立体光刻是最常用制作方法,丙烯腈-丁二烯-苯乙烯和VeroClearTangoPlus(Stratasys)是最常用材料。
- 平均每模型制造成本为624.83美元。
- 结局包括模型测量准确性、术中器械与术前选择器械的一致性以及定性反馈。
临床怎么用
- 三维打印模型可作为住院医师培训和开放血管与血管内神经外科术前规划的工具。
- 在直接接触病例有限的环境中,三维打印模型可补充培训。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: The expanding use of three-dimensional (3D) printing in open vascular and endovascular neurosurgery presents a promising new tool in resident learning as well as operative planning. Recent studies have investigated the accuracy, efficacy, and practicality of 3D-printed models of patient-specific disease. OBJECTIVE: To review the literature exploring 3D modeling in neurovascular and endovascular surgery for training, simulation, and surgical preparation. METHODS: A systematic search of the PubMed database was conducted using keywords relating to 3D printing and neurovascular or endovascular surgery. Articles were manually screened to include those that focused on resident training, surgical simulation, or preoperative planning. Information on fabrication method, materials, cost, and validation measures was collected. RESULTS: A total of 27 articles were identified that met inclusion criteria. Twenty-one studies used 3D printing to produce aneurysm models, 5 produced arteriovenous malformation models, and 1 produced aneurysm and arteriovenous malformation models. Stereolithography was the most common fabrication method used, with acrylonitrile butadiene styrene and VeroClearTangoPlus (Stratasys) being the most frequently used materials. The mean manufacturing cost per model was U.S. $624.83. Outcomes included model measurement accuracy, concordance of intraoperative devices with those selected preoperatively, and qualitative feedback. CONCLUSIONS: Models generated by 3D printing are anatomically accurate and aid in resident learning as well as operative planning in open vascular and endovascular neurosurgery. As advancements in printing methods are made and manufacturing costs decrease, this tool may supplement training on a wider scale in a field in which direct exposure to cases is limited.
引用
- McGuire LS, Fuentes A, Alaraj A, et al. Three-Dimensional Modeling in Training, Simulation, and Surgical Planning in Open Vascular and Endovascular Neurosurgery: A Systematic Review of the Literature. World Neurosurg. 2021. PMID: 34293525. doi:10.1016/j.wneu.2021.07.057
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。