3D打印体外脑动静脉畸形模型用于栓塞模拟与血流分析
本研究从患者3D旋转血管造影提取AVM巢三维图像,经3D打印和PDMS涂层制作空心体外AVM模型,用于液体栓塞剂注射和4D flow MRI。模型成功复现真实治疗条件及plug and push技术,4D flow MRI结果与计算流体动力学分析相当。该模型为栓塞技术训练、血流动力学分析及新器械材料开发提供有用工具。
要点
- 3D打印体外模型可真实呈现患者AVM巢血管结构及复杂性
- 模型成功复现液体栓塞剂注射及plug and push技术
- 4D flow MRI与计算流体动力学分析结果具有可比性
核心结论
- 利用3D打印技术成功创建具有真实巢几何复杂性的体外人脑AVM模型,可用于栓塞技术训练、血流动力学分析及新器械材料开发。
研究设计与样本
- 从一名患者的3D旋转血管造影中提取AVM巢三维图像,3D打印内血管模具,涂覆聚二甲基硅氧烷后经丙酮去除,形成空心AVM模型。
- 在模型中进行液体栓塞材料注射和4D flow MRI,并与计算流体动力学分析比较流量。
主要发现
- 3D体外AVM模型真实呈现源自患者的人脑巢血管结构及复杂性。
- 在体外模型中注射液体栓塞剂成功复现真实治疗条件。
- 模型模拟了液体栓塞材料渗透进入AVM巢前的plug and push技术。
- 4D flow MRI结果与计算流体动力学分析相当。
临床怎么用
- 该模型可用于液体栓塞材料测试和临床前栓塞技术训练。
- 该模型可用于AVM血流动力学分析以及新器械和新材料开发。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Current in vitro models for human brain arteriovenous malformation (AVM) analyzing the efficacy of embolic materials or flow conditions are limited by a lack of realistic anatomic features of complex AVM nidus. The purpose of this study was to evaluate a newly developed in vitro AVM model for embolic material testing, preclinical training, and flow analysis. METHODS: Three-dimensional (3D) images of the AVM nidus were extracted from 3D rotational angiography from a patient. Inner vascular mold was printed using a 3D printer, coated with polydimethylsiloxanes, and then was removed by acetone, leaving a hollow AVM model. Injections of liquid embolic material and 4-dimensional (4D) flow magnetic resonance imaging (MRI) were performed using the AVM models. Additionally, computational fluid dynamics analysis was performed to examine the flow volume rate as compared with 4D flow MRI. RESULTS: The manufacture of 3D in vitro AVM models delivers a realistic representation of human nidus vasculature and complexity derived from patients. The injection of liquid embolic agents performed in the in vitro model successfully replicated real-life treatment conditions. The model simulated the plug and push technique before penetration of the liquid embolic material into the AVM nidus. The 4D flow MRI results were comparable to computational fluid dynamics analysis. CONCLUSIONS: An in vitro human brain AVM model with realistic geometric complexities of nidus was successfully created using 3D printing technology. This AVM model offers a useful tool for training of embolization techniques and analysis of hemodynamics analysis, and development of new devices and materials.
引用
- Kaneko N, Ullman H, Ali F, et al. In Vitro Modeling of Human Brain Arteriovenous Malformation for Endovascular Simulation and Flow Analysis. World Neurosurg. 2020. PMID: 32565379. doi:10.1016/j.wneu.2020.06.084
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。