文献速递小儿神经外科与脑积水神经重症

一种简易低成本脑室导管置入训练模型:技术说明

A simple and cost-effective model for ventricular catheter placement training: technical note.
PubMed 文献 · J Neurosurg · 2020-05-01

该技术说明介绍了一种用自制弹道明胶和3D打印脑室系统模具制作的脑模型,成本低于每模5美元,用于脑室外引流(EVD)置入训练。10名医学生接受基础培训后在模型上操作,均报告模型易用且有助于理解操作步骤,一次尝试后所有导管尖端均位于同侧额角。

要点

  • 自制弹道明胶脑模型成本低于每模5美元,易于复制且解剖准确。
  • 模型硬度适中,可容纳导管并保持脑室腔形态,便于取出检查。
  • 10名医学生一次尝试后均实现脑室导管尖端位于同侧额角。

核心结论

  • 该脑模型易于复制、成本低、解剖准确,为神经外科医生提供了无风险的教学与练习脑室导管置入的媒介。

研究设计与样本

  • 技术说明类研究,使用自制弹道明胶以解剖正确的颅骨模型为模具制作脑模型,并用3D打印脑室系统模型制作脑室腔模具。
  • 10名医学生接受EVD置入基础讲解和模型演示后,在脑模型上执行EVD置入,并接受问卷调查和导管尖端位置评估。

主要发现

  • 最终模型成本较低且易于制作,质地足以让导管穿过,同时保持包括侧脑室腔在内的形状。
  • 致密明胶可将导管固定在最终位置,分离两半后即可检查。
  • 所有参与医学生均报告模型易于使用,有助于理解EVD置入步骤和技术,并对脑室导管的理想位置提供了良好反馈。
  • 所有参与者在一次尝试后均实现了脑室导管的充分定位。

关键数值与推荐

  • 导管尖端充分位置定义为位于同侧额角。
  • 模型制作成本低于每模5美元。

临床怎么用

  • 可用于神经外科住院医师或医学生在临床操作前进行EVD置入的无风险练习。
  • 适合资源有限的小型培训项目或医院作为低成本训练工具。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: External ventricular drain (EVD) placement is one of first cranial procedures neurosurgery residents are expected to perform independently. While proper training improves patient outcomes, there are few options for practicing EVD placement prior to placing the EVD in patients in a clinical setting. Proposed solutions to this include using cadaveric models and virtual simulations, but barriers exist with these as well in regard to authenticity. EVD simulators using virtual reality technologies are a promising new technique for training, but the cost of these devices poses a barrier to general/widespread accessibility among smaller programs or underserved hospitals. The authors desribe a novel, yet simple, and cost-effective technique (less than $5 per mold) for developing a brain model constructed of homemade ballistics gelatin that can be used for teaching and practicing the placement of EVD. METHODS: A brain model is made with ballistics gelatin using an anatomically correct skull model as a mold. A 3D-printed ventricular system model is used to create a mold of an anatomically correct ventricular system in the brain model. A group of medical students (n = 10) were given a basic presentation about EVD placement, including standard landmarks and placement techniques, and were also shown a demonstration of EVD placement on the brain model. They were then allowed to perform an EVD placement using the brain model. The students were surveyed on their experience with using the brain model, including usability and practicality of the model. Accuracy of EVD placement by each student was also assessed, with adequate position of catheter tip being in the ipsilateral frontal horn. RESULTS: The final product is fairly inexpensive and easy to make. It is soft enough to pass a catheter through, but it is also firm enough to maintain its shape, including a cavity representing the lateral ventricles. The dense gelatin holds the catheter in its final resting position, while the two halves are separated and inspected. All participants in the test group of medical students reported that the brain model was easy to use, helped them understand the steps and technique of EVD placement, and provided good feedback on the ideal position of ventricular catheters. All of the participants in the group had adequate positioning of their ventricular catheters after one attempt. CONCLUSIONS: The presented brain model is easy to replicate, inexpensive, anatomically accurate, and provides a medium for neurosurgeons to teach and practice ventricular catheter placement in a risk-free environment.

来源:J Neurosurg,查看原文。版权归原作者所有。

引用

  1. Todnem N, Nguyen KD, Reddy V, et al. A simple and cost-effective model for ventricular catheter placement training: technical note. J Neurosurg. 2020. PMID: 32357317. doi:10.3171/2020.2.JNS19161

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。