微板辅助椎板间融合在C1-C2螺钉固定中的应用
本研究回顾性分析43例采用微板辅助髂嵴自体骨移植行后路寰枢椎融合的患者,31例获长期随访(平均24.91个月),融合成功30例(96.77%),平均融合时间6.23个月,无微板相关并发症。作者认为该技术融合率高、并发症概率低,可作为C1-C2融合中骨移植固定的一种替代选择。
要点
- 微板辅助椎板间融合在C1-C2螺钉固定中融合成功率达96.77%(30/31),平均融合时间6.23个月。
- 无微板相关并发症发生,未发现神经功能缺损。
- 作者认为该技术融合率高、并发症概率低,可作为C1-C2融合中骨移植固定的替代选择。
核心结论
- 微板辅助椎板间融合联合C1-C2螺钉固定融合率高、并发症概率低,作者认为该技术具有良好的疗效和安全性,可作为C1-C2融合中骨移植固定的一种替代选择。
研究设计与样本
- 回顾性研究,纳入在本机构接受微板辅助髂嵴自体骨移植后路寰枢椎融合的43例患者,记录并计算手术相关并发症,术后通过常规X线摄影随访评估寰枢椎融合情况。
- 融合成功定义为:1)骨移植块与寰椎和枢椎之间均存在骨桥接;2)屈伸位X线摄影上寰枢椎棘突无活动,即两视图分别测量的长度变化<1 mm。
主要发现
- 43例患者中31例获得长期随访数据,其余12例失访(平均随访时间24.91个月,范围6-72个月)。
- 31例患者中女性22例(70.96%)、男性9例(29.03%),平均年龄63.33岁。
- 病因方面,寰枢椎脱位或半脱位由退变、类风湿关节炎、齿状突骨折、创伤和齿状突小骨引起者分别为14例(45%)、3例(10%)、5例(16%)、8例(26%)和1例(3%)。
- 30例(96.77%)患者实现融合成功,平均融合时间6.23个月;仅1例(3.23%)患者未达到融合标准。
- 未发生微板相关并发症;观察到1例椎动脉破裂但无需输血、1例吸入性肺炎、1例尿路感染、1例需输血的贫血和1例腿部感觉异常,未发现神经功能缺损。
局限性
- 43例患者中12例失访,仅31例获得长期随访数据。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: The interlaminar fusion combination involving C1-C2 screwing fixation is one of the most effective techniques for atlantoaxial dislocation or subluxation, and the bone graft is usually stabilized by wiring constructs. However, some adverse events were reported during the insertion of sublaminar wiring, such as accidentally damaging the spinal cord or dura. Thus we used the miniplate to stabilize the harvest bone graft on the C1-C2 laminar, which led to a shorter operation time and prevented spinal canal violation. This study investigated the safety and efficacy of the novel surgical technique, namely miniplate-augmented interlaminar fusion. METHODS: We retrospectively reviewed 43 patients who underwent posterior atlantoaxial fusion with the miniplate-augmented iliac crest autograft at our institute. Complications related to surgery were recorded and calculated. After operation, patients were followed up through routine radiography to examine whether the fusion of the atlantoaxial segment was achieved. Success of fusion was defined as follows: 1) the presence of bone bridging between the bone graft and both the atlas and axis; and 2) the absence of movement of the atlantoaxial spinous process on flexion-extension radiography, which meant that the variation of length measured in 2 views, respectively, was <1 mm. The first time when radiography showed successful fusion after surgery was termed as fusion time and was recorded individually. In addition, overall fusion rates and mean fusion times were analyzed. RESULTS: Of 43 patients, long-term follow-up data were available for 31 patients, whereas the remaining 12 patients had dropped out (mean follow-up duration, 24.91 months; range, 6-72 months). Among 31 patients, 22 (70.96%) were women and 9 (29.03%) were men. The mean age was 63.33 years. Regarding the etiology, atlantoaxial dislocations or subluxations were caused due to degeneration, rheumatoid arthritis, odontoid fracture, trauma, and os odontoideum in 14 (45%), 3 (10%), 5 (16%), 8 (26%), and 1 (3%) patient(s), respectively. Successful fusion was achieved in 30 (96.77%) patients, with a mean fusion time of 6.23 months, whereas only 1 (3.23%) patient did not meet the fusion criteria. No complications related to the miniplate occurred. We noted vertebral artery rupture not requiring blood transfusion in 1 patient, aspiration pneumonia in 1 patient, urinary tract infection in 1 patient, anemia requiring transfusion in 1 patient, and leg dysesthesia in 1 patient. No neurologic deficit was found. CONCLUSIONS: Miniplate-augmented interlaminar fusion with C1-C2 screwing resulted in excellent fusion rates with a considerably low probability of complications. Hence this novel technique for bone graft fixation with atlantoaxial screwing has a good efficacy and safety and can serve as an alternative for bone graft fixation during C1-C2 fusion.
引用
- Huang PJ, Lin JH, Chiang YH, et al. Miniplate-Augmented Interlaminar Fusion in C1-C2 Screwing. World Neurosurg. 2020. PMID: 32173550. doi:10.1016/j.wneu.2020.03.023
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。