3D打印颅脑模型在复杂颅内病变模拟手术中的应用
研究收集颅内肿瘤或动脉瘤患者的CT、MRI及CT图像,进行多模态图像重建,构建包含颅底、脑动脉及肿瘤或动脉瘤的3D打印模型,在显微镜下完成49例模拟手术,验证并积累经验后实施实际手术。术后MRI复查显示84%(21/25)患者肿瘤全切除、16%(4/25)次全切除;数字减影血管造影证实24例39个动脉瘤全部完全夹闭。结论认为3D打印颅脑模型为复杂脑肿瘤或动脉瘤的锁孔手术提供了有效的模拟手术条件。
要点
- 3D打印模型可用于设计手术路径、模拟锁孔入路分块切除肿瘤并验证切除范围。
- 模型支持磨除前床突、鞍结节、岩尖、内听道等骨性结构及使用激光刀和超声吸引器切除肿瘤。
- 术后MRI显示84%(21/25)肿瘤全切除,数字减影血管造影证实24例39个动脉瘤全部完全夹闭。
核心结论
- 3D打印颅脑模型为复杂脑肿瘤或动脉瘤的锁孔手术提供了有效的模拟手术条件,有助于术前手术设计、积累手术经验和验证手术结果。
研究设计与样本
- 收集颅内肿瘤或动脉瘤患者的CT、MRI及CT图像,进行多模态图像重建,构建包含颅底、脑动脉及脑肿瘤或动脉瘤的3D打印模型,在显微镜下完成49例模拟手术,验证并积累经验后实施实际手术。
主要发现
- 3D打印脑肿瘤模型用于设计手术路径、模拟经锁孔入路分块切除肿瘤并验证肿瘤切除范围。
- 使用钻磨除骨瓣及前床突、鞍结节、岩尖、内听道等骨性结构,使用激光刀和超声吸引器切除肿瘤。
- 3D打印动脉瘤模型用于评估不同锁孔入路的可行性并选择动脉瘤夹,实际手术基于模拟手术结果进行。
- 术后MRI复查显示84%(21/25)患者肿瘤全切除,16%(4/25)次全切除。
- 数字减影血管造影证实24例39个动脉瘤全部完全夹闭。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: To demonstrate the use of 3-dimensional (3D)-printed intracranial lesion models for complex neurosurgery to increase the success rate of clinical surgeries via practice in simulated surgeries. METHODS: We collected computed tomographic, magnetic resonance (MR), and computed tomographic images from patients with intracranial tumor or aneurysm, conducted multimodal image reconstruction, and then constructed a 3D-printed model with the skull base, cerebral arteries, and brain tumor or aneurysm. Forty-nine simulated surgeries were carried out on the model under a microscope, and actual surgery was carried out after validation and accumulation of experience. RESULTS: The 3D-printed brain tumor models were used to design the surgical route, to simulate piecemeal resection of tumors through keyhole approach, and to verify the extent of tumor resection. A drill was used for bone flap removal and milling of bony structures such as the anterior clinoid process, tuberculum sellae, petrous apex, and internal acoustic meatus. The tumors were removed by laser knife and cavitron ultrasonic aspiration. The 3D-printed aneurysm models were used to assess the feasibility of different keyhole approaches and to select the aneurysm clip. Actual surgery was based on the results of the simulated surgery. Postoperative MR image review showed that 84% (21/25) of patients had total tumor resection and 16% (4/25) subtotal resection. Digital subtraction angiography confirmed complete clipping of all aneurysms (24 cases/39 aneurysms). CONCLUSIONS: 3D-printed craniocerebral models provide effective simulated surgery conditions for keyhole surgeries of complex brain tumors or aneurysms and aid in preoperative surgical design, accumulation of surgical experience, and validation of surgical outcomes.
引用
- Lan Q, Zhu Q, Xu L, et al. Application of 3D-Printed Craniocerebral Model in Simulated Surgery for Complex Intracranial Lesions. World Neurosurg. 2019. PMID: 31712116. doi:10.1016/j.wneu.2019.10.191
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。