文献速递神经重症神经创伤

一种新型可逆膨胀动态开颅骨瓣固定板的生物力学研究

Biomechanics of a novel reversibly expandable dynamic craniotomy bone flap fixation plate.
PubMed 文献 · J Neurosurg · 2019-01-04

在尸体标本上评估一种新型可膨胀颅骨固定板的生物力学性能,该板用于动态开颅,可在颅内压升高时让骨瓣向外移动以扩大颅内体积,颅内压正常后回缩并防止骨瓣内陷。结果显示动态开颅对颅内压的控制优于铰链开颅和标准开颅技术(p < 0.001),平板可承受骨瓣下沉的平均峰值载荷643.3 ± 26.1 N,平均向内位移1.92 ± 0.09 mm,静态剪切可承受71.6 mm的峰值膨胀,重复15 mm向外膨胀和回缩最多500次无裂纹和失效点。

要点

  • 动态开颅对颅内体积增加时颅内压的控制优于铰链开颅和标准开颅技术(p < 0.001)。
  • 平板可承受骨瓣下沉的平均峰值载荷643.3 ± 26.1 N,平均向内位移1.92 ± 0.09 mm。
  • 平板可承受71.6 mm的峰值膨胀,重复15 mm膨胀回缩最多500次无裂纹和失效点。

核心结论

  • 可逆膨胀板提供低轮廓骨瓣固定,刚性限制骨瓣下沉,并实现高耐受重复膨胀和回缩的颅骨减压。

研究设计与样本

  • 在尸体标本上对新型可膨胀颅骨固定板进行生物力学评估,比较不同骨瓣固定技术对颅内压控制的程度,并进行平板顺应性测试、静态压缩测试、准静态剪切张力测试和疲劳剪切张力评估。

主要发现

  • 动态开颅对颅内体积增加时颅内压的控制优于铰链开颅和标准开颅技术(p < 0.001)。
  • 静态压缩结果显示平板可承受骨瓣下沉,平均峰值载荷为643.3 ± 26.1 N,平均向内骨瓣位移为1.92 ± 0.09 mm。
  • 静态剪切张力结果表明平板可承受71.6 mm的峰值膨胀。
  • 动态剪切张力测试中平板重复15 mm向外膨胀和回缩总计最多500次,未显示裂纹和失效点。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: Biomechanical evaluation of a novel expandable cranial fixation plate was assessed in cadavers. The dynamic craniotomy procedure uses low-profile reversibly expandable plates that allow cranial decompression by providing for intracranial volume expansion without removal of the bone flap. The plates allow reversible outward movement of the bone flap upon an increase in intracranial pressure (ICP) and also retract the bone flap and prevent it from sinking inside the cranium once the ICP normalizes. METHODS: A comparative evaluation of the extent of ICP control with an increase in intracranial volume between various bone flap fixation techniques was undertaken along with testing of the expandable plate compliance. Static compression tests of the plates were performed to assess bone flap fixation and prevention of sinking. Quasi-static shear tension testing of the plates was undertaken to test the tolerance of the plates for expansion. Fatigue shear tension evaluation of the plates was undertaken to assess tolerance for repetitive expansion and contraction. RESULTS: The dynamic craniotomy provided superior control of ICP with an increase in intracranial volume compared to the hinged craniotomy and standard craniotomy techniques (p < 0.001). Static compression results revealed that the plates withstood bone flap sinkage with a mean peak load of 643.3 ± 26.1 N and a mean inward bone flap displacement of 1.92 ± 0.09 mm. Static shear tension results indicated that the plates could withstand a peak expansion of 71.6 mm. Dynamic shear tension testing of the plates with repetitive 15-mm outward expansion and retraction for a total of up to 500 cycles revealed no cracking and no failure points. CONCLUSIONS: The reversibly expandable plates provide for a low-profile bone flap fixation with rigid restriction of bone flap sinking and also enable cranial decompression with a high tolerance for repetitive expansion and contraction.

来源:J Neurosurg,查看原文。版权归原作者所有。

引用

  1. Khanna R, Ferrara L, Khanna S, et al. Biomechanics of a novel reversibly expandable dynamic craniotomy bone flap fixation plate. J Neurosurg. 2019. PMID: 30611148. doi:10.3171/2018.8.JNS172614

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。