体内15年后断裂的聚甲基丙烯酸甲酯颅骨修补材料的性能分析
2001年一名27岁男性因脑膜瘤累及颅骨行颅骨切除及手工CMW-3聚甲基丙烯酸甲酯颅骨修补,2016年因进行性神经功能损害发现修补材料断裂为4块移位碎片并取出,同期植入聚醚醚酮个性化植入物。将断裂修补材料与新鲜CMW-3试件对比,行凝胶渗透色谱、微计算机断层扫描和弯曲强度测试,并用有限元分析骨折。结果显示断裂修补材料与CMW-3的多分散指数和分子量无显著差异;断裂修补材料总孔隙率为10.7%,常压固化新鲜CMW-3为4.1%,2.2 bar固化者为0.06%;2.2 bar固化CMW-3的弯曲强度显著高于断裂修补材料和常压固化CMW-3。有限元分析显示在100 N载荷下薄弱点应力为12.2 MPa。结论认为CMW-3在体内15年后分子量和弯曲强度未受影响,但植入物设计和聚甲基丙烯酸甲酯的处理似乎是改善颅骨重建力学性能的重要因素。
要点
- 断裂颅骨修补材料与新鲜CMW-3的多分散指数和分子量无显著差异。
- 断裂修补材料总孔隙率10.7%,常压固化CMW-3为4.1%,2.2 bar固化者为0.06%。
- 2.2 bar固化CMW-3弯曲强度显著高于断裂修补材料和常压固化CMW-3。
核心结论
- 这项离体研究表明CMW-3在体内15年后分子量和弯曲强度未受影响,但植入物设计和聚甲基丙烯酸甲酯的处理似乎是改善颅骨重建力学性能的重要因素。
研究设计与样本
- 离体研究:将1例体内15年后断裂的CMW-3颅骨修补材料与新鲜制备的CMW-3试件对比,行凝胶渗透色谱、微计算机断层扫描和弯曲强度测试,并用有限元分析骨折。
主要发现
- 断裂颅骨修补材料与CMW-3的多分散指数和分子量无显著差异。
- 断裂颅骨修补材料总孔隙率为10.7%,常压固化新鲜CMW-3为4.1%,2.2 bar固化者为0.06%。
- 2.2 bar固化CMW-3的弯曲强度显著高于断裂颅骨修补材料和常压固化CMW-3。
- 有限元分析显示在100 N载荷下薄弱点应力为12.2 MPa。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: In 2001, a 27-year-old man was diagnosed with a meningioma with skull bone involvement. A craniectomy was performed and a CMW-3 poly(methyl methacrylate) cranioplasty was manually manufactured to reconstruct the remaining cranial defect. In 2016, he complained about progressive neurologic impairment. A computed tomography scan revealed that the cranioplasty had fractured into 4 dislocated pieces. Removal was indicated, and during the same operation a polyetheretherketone patient-specific implant was inserted. METHODS: The fractured cranioplasty was compared with freshly prepared CMW-3 specimens to determine whether the material properties had changed during 15 years in vivo. Gel permeation chromatography, microcomputed tomography, and flexural strength tests were performed. The fracture itself was analyzed using finite element analysis. RESULTS: The polydispersity index and molecular weight were not significantly different for the fractured cranioplasty and CMW-3. The fractured cranioplasty contained a total porosity of 10.7%, fresh CMW-3 cured at atmospheric pressure contained 4.1%, and 0.06% when cured at 2.2 bar. The flexural strength of the CMW-3 cured at 2.2 bar was significantly higher than both the fractured cranioplasty and CMW-3 cured at atmospheric pressure. Finite element analysis showed stress of 12.2 MPa under a load of 100 N on a weak spot. CONCLUSIONS: This ex vivo study shows that CMW-3 after 15 years in vivo was not influenced in molecular weight or flexural strength. However, the design of the implant and the handling of the poly(methyl methacrylate) seem to be important factors to improve mechanical properties of cranial reconstructions.
引用
- van de Vijfeijken SECM, Münker TJAG, de Jager N, et al. Properties of an In Vivo Fractured Poly(Methyl Methacrylate) Cranioplasty After 15 Years. World Neurosurg. 2018. PMID: 30447447. doi:10.1016/j.wneu.2018.11.026
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。