文献速递神经创伤

一种通过添加外壳降低线性与旋转加速度的美式橄榄球头盔原型

A football helmet prototype that reduces linear and rotational acceleration with the addition of an outer shell.
PubMed 文献 · J Neurosurg · 2018-06-29

本研究在实验室中使用超大号Riddell Revolution橄榄球头盔,测试两种非牛顿材料作为外挂减震外壳,并在前柱、侧方和后部三个位置以6 m/sec进行气动冲击。结果显示70 durometer Sorbothane为最优外壳材料,该外壳原型在侧方和前柱位置分别降低线性加速度5.8%(从75.4g降至71.1g;p < 0.001)和10.8%(从89.5g降至79.8g;p = 0.033),并在前柱位置降低旋转加速度49.8%(从9312.8 rad/sec2降至4671.7 rad/sec2;p < 0.001)。

要点

  • 70 durometer Sorbothane被选为最优外壳材料,其力衰减优于Dow Corning化合物且冲击后无永久变形。
  • 外壳原型在侧方降低线性加速度5.8%(75.4g至71.1g;p < 0.001),前柱降低10.8%(89.5g至79.8g;p = 0.033)。
  • 前柱位置旋转加速度降低49.8%(9312.8 rad/sec2至4671.7 rad/sec2;p < 0.001)。

核心结论

  • 70 durometer Sorbothane被选为最优外壳材料,外壳原型在侧方和前柱位置降低线性加速度5%至10%,在前柱位置降低旋转加速度50%。
  • 鉴于公开报道的头盔设计文献匮乏及旋转加速度在头部损伤中的重要性,该外壳原型在旋转加速度上的大幅降低可能为未来头盔设计改进提供潜力。

研究设计与样本

  • 实验室研究,使用超大号Riddell Revolution橄榄球头盔。
  • 两种材料(Dow Corning Dilatant Compound和Sorbothane)因非牛顿特性被选用于开发外壳。
  • 外部垫片牢固附着于头盔的3个位置:前柱、侧方和后部。
  • 头盔在每个位置以6 m/sec进行气动冲击测试5次。
  • 使用两样本t检验评估带外壳与不带外壳头盔的线性/旋转加速度差异。

主要发现

  • Sorbothane在力衰减方面优于Dow Corning化合物,且冲击后无永久变形。
  • 在5种不同硬度等级中,70 durometer Sorbothane具有最大的能量耗散和刚度,被选为最优外壳材料。
  • 带外壳的头盔原型在侧方位置将线性加速度降低5.8%(从75.4g降至71.1g;p < 0.001),在前柱位置降低10.8%(从89.5g降至79.8g;p = 0.033)。
  • 带外壳的头盔原型在前柱位置将旋转加速度降低49.8%(从9312.8 rad/sec2降至4671.7 rad/sec2;p < 0.001)。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: Amid the public health controversy surrounding American football, a helmet that can reduce linear and rotational acceleration has the potential to decrease forces transmitted to the brain. The authors hypothesized that a football helmet with an outer shell would reduce both linear and rotational acceleration. The authors' objectives were to 1) determine an optimal material for a shock-absorbing outer shell and 2) examine the ability of an outer shell to reduce linear and/or rotational acceleration. METHODS: A laboratory-based investigation was undertaken using an extra-large Riddell Revolution football helmet. Two materials (Dow Corning Dilatant Compound and Sorbothane) were selected for their non-Newtonian properties (changes in viscosity with shear stress) to develop an outer shell. External pads were attached securely to the helmet at 3 locations: the front boss, the side, and the back. The helmet was impacted 5 times per location at 6 m/sec with pneumatic ram testing. Two-sample t-tests were used to evaluate linear/rotational acceleration differences between a helmet with and a helmet without the outer shell. RESULTS: Sorbothane was superior to the Dow Corning compound in force reduction and recovered from impact without permanent deformation. Of 5 different grades, 70-duro (a unit of hardness measured with a durometer) Sorbothane was found to have the greatest energy dissipation and stiffness, and it was chosen as the optimal outer-shell material. The helmet prototype with the outer shell reduced linear acceleration by 5.8% (from 75.4g to 71.1g; p < 0.001) and 10.8% (from 89.5g to 79.8g; p = 0.033) at the side and front boss locations, respectively, and reduced rotational acceleration by 49.8% (from 9312.8 rad/sec2 to 4671.7 rad/sed2; p < 0.001) at the front boss location. CONCLUSIONS: Sorbothane (70 duro) was chosen as the optimal outer-shell material. In the outer-shell prototype helmet, the results demonstrated a 5%-10% reduction in linear acceleration at the side and front boss locations, and a 50% reduction in rotational acceleration at the front boss location. Given the paucity of publicly reported helmet-design literature and the importance of rotational acceleration in head injuries, the substantial reduction seen in rotational acceleration with this outer-shell prototype holds the potential for future helmet-design improvements.

来源:J Neurosurg,查看原文。版权归原作者所有。

引用

  1. Zuckerman SL, Reynolds BB, Yengo-Kahn AM, et al. A football helmet prototype that reduces linear and rotational acceleration with the addition of an outer shell. J Neurosurg. 2018. PMID: 29957115. doi:10.3171/2018.1.JNS172733

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。