使用桌面3D打印机的低成本定制聚甲基丙烯酸甲酯植入物进行颅骨修补术
本文描述了在大学教学医院中,使用基于CT的低成本定制聚甲基丙烯酸甲酯(PMMA)植入物为22例连续患者进行颅骨修补的方法与经验。结果显示无感染、植入物排斥或伤口裂开,无需取出植入物,外观显著改善且贴合极佳,成本仅为商业植入物的一小部分。
要点
- 使用开源或低成本软件和桌面3D打印机制作定制PMMA植入物,可在任何机构实现。
- 22例患者中,颅骨切除指征为创伤性脑损伤16例(73%)、肿瘤切除3例(14%)、感染1例(4%)、血管性2例(9%)。
- 随访1至6个月,无感染、植入物排斥或伤口裂开,无植入物取出,外观显著改善且贴合极佳。
核心结论
- 使用定制PMMA植入物在随访时患者、家属和外科医生满意度极佳,成本仅为商业植入物的一小部分。
- 作者认为该技术可能成为所有接受颅骨修补术患者的有吸引力的选择。
研究设计与样本
- 对1年期间在大学教学医院接受基于CT的低成本定制PMMA颅骨修补术的22例连续患者进行回顾性分析。
- 收集术前数据(性别、年龄、CT建模参数包括植入物表面积、颅骨切除原因、损伤和/或切除日期、缺损复杂性、合并症)和术后数据(并发症如植入物暴露、感染、血肿、血清肿、植入物失败、癫痫发作、植入物成本和美容效果)。
主要发现
- 颅骨切除指征为创伤性脑损伤16例(73%)、肿瘤切除3例(14%)、感染1例(4%)、血管性2例(9%)。
- 距前次手术至PMMA颅骨修补的中位间隔为12个月。
- 手术时间范围为90至150分钟(平均126分钟)。
- 平均颅骨缺损面积为65.16 cm²(范围29.31-131.06 cm²)。
- 随访1至6个月期间,无感染、植入物排斥或伤口裂开迹象,无植入物需取出;所有患者外观显著改善,植入物贴合极佳。
临床怎么用
- 作者描述的方法可使用开源或低成本软件和桌面3D打印机在任何机构定制精确可靠的低成本植入物。
- 作者认为该技术可能成为所有接受颅骨修补术患者的有吸引力的选择。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: Cranioplasty implants should be widely available, low in cost, and customized or easy to mold during surgery. Although autologous bone remains the first choice for repair, it cannot always be used due to infection, fragmentation, bone resorption, or other causes, which led to use of synthetic alternatives. The most frequently used allogenic material for cranial reconstructions with long-term results is polymethylmethacrylate (PMMA). Three-dimensional printing technology has allowed the production of increasingly popular customized, prefabricated implants. The authors describe their method and experience with a customized PMMA prosthesis using a precise and reliable low-cost implant that can be customized at any institution with open-source or low-cost software and desktop 3D printers. METHODS: A review of 22 consecutive patients undergoing CT-based, low-cost, customized PMMA cranioplasty over a 1-year period at a university teaching hospital was performed. Preoperative data included patient sex and age; CT modeling parameters, including the surface area of the implant (defect); reason for craniectomy; date(s) of injury and/or resections; the complexity of the defect; and associated comorbidities. Postoperative data included morbiditiy and complications, such as implant exposure, infection, hematoma, seroma, implant failure, and seizures; the cost of the implant; and cosmetic outcome. RESULTS: Indications for the primary craniectomy were traumatic brain injury (16, 73%), tumor resection (3, 14%), infection (1, 4%), and vascular (2, 9%). The median interval between previous surgery and PMMA cranioplasty was 12 months. The operation time ranged from 90 to 150 minutes (mean 126 minutes). The average cranial defect measured 65.16 cm2 (range 29.31-131.06 cm2). During the recovery period, there was no sign of infection, implant rejection, or wound dehiscence, and none of the implants had to be removed over a follow-up ranging from 1 to 6 months. The aesthetic appearance of all patients was significantly improved, and the implant fit was excellent. CONCLUSIONS: The use of a customized PMMA was associated with excellent patient, family, and surgeon satisfaction at follow-up at a fraction of the cost associated with commercially available implants. This technique could be an attractive option to all patients undergoing cranioplasty.
引用
- Morales-Gómez JA, Garcia-Estrada E, Leos-Bortoni JE, et al. Cranioplasty with a low-cost customized polymethylmethacrylate implant using a desktop 3D printer. J Neurosurg. 2018. PMID: 29905512. doi:10.3171/2017.12.JNS172574
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。