设置压力可改变可调分流阀所致MRI伪影的大小和形状:4种最新型号研究
作者将4种新型抗MRI干扰可调分流阀(proGAV 2.0、Codman Certas Plus、Polaris、Strata MR)贴于健康志愿者颞部头皮,在3.0-T GE扫描仪及Philips、Siemens扫描仪上比较不同压力设置下的伪影大小和形状;发现所有阀门伪影大小和形状随压力设置改变,自旋回波序列伪影较梯度回波序列不明显,作者建议改变压力设置是减小MRI伪影最简单的方法之一。
要点
- 4种可调分流阀的MRI伪影大小和形状均随压力设置发生显著变化。
- 自旋回波序列上伪影较梯度回波序列不明显。
- 作者建议改变压力设置是减小MRI伪影最简单的方法之一。
核心结论
- 所有可调分流阀的伪影随压力设置发生大体变化,不仅伪影最大距离改变,形状也显著改变。
- 作者建议改变压力设置是减小MRI伪影最简单的方法之一。
研究设计与样本
- 将4种新型抗MRI干扰可调分流阀(proGAV 2.0、Codman Certas Plus、Polaris、Strata MR)贴于1名健康志愿者颞部头皮。
- 每种阀门根据磁体与体轴方向设置3种不同压力刻度。
- 在3.0-T GE扫描仪上评估并比较所有阀门伪影,其中2种阀门另在Philips扫描仪和Siemens扫描仪上评估。
- 平面内伪影大小以伪影距预期头皮的最大距离评估。
主要发现
- 在3种不同MRI扫描仪上,所有阀门的伪影大小和形状均随压力设置改变。
- 自旋回波序列上伪影较梯度回波序列不明显。
- 对弥散加权成像和飞行时间MR血管成像,作者匹配同一序列内的图像编号并比较伪影表现。
- 所有阀门中,受伪影影响的图像数量和显示最大伪影的图像编号在不同压力设置间不同。
临床怎么用
- 作者建议改变压力设置是减小MRI伪影最简单的方法之一。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: Adjustable shunt valves that have been developed for the management of hydrocephalus all rely on intrinsically magnetic components, and artifacts with these valves on MRI are thus inevitable. The authors have previously reported that the shapes of shunt artifacts differ under different valve pressures with the proGAV 2.0 valve. In the present study the authors compared the size and shape of artifacts at different pressure settings with 4 new-model shunt valves. METHODS: The authors attached 4 new models of MRI-resistant shunt valve to the temporal scalp of a healthy volunteer: the proGAV 2.0; Codman Certas Plus; Polaris; and Strata MR. They set 3 different scales of pressures for each valve, depending on magnet orientation to the body axis. Artifacts were evaluated and compared among all valves on a 3.0-T GE scanner and 2 valves were also evaluated on a Philips scanner and a Siemens scanner. In-plane artifact sizes were evaluated as the maximum distance of the artifact from the expected scalp. RESULTS: The sizes and shapes of artifacts changed depending on valve pressure for all valves on the 3 different MRI scanners. Artifacts were less prominent on spin echo sequences than on gradient echo sequences. For diffusion-weighted imaging and time-of-flight MR angiography, the authors matched image numbers within the same sequence and compared appearances of artifacts. For all valves, the number of images affected by artifacts and the image number showing the largest artifact differed among valve settings. CONCLUSIONS: Artifacts of all adjustable shunt valves showed gross changes corresponding to pressure setting. Not only the maximum distance of artifacts but also the shape changed significantly. The authors suggest that changing pressure settings offers one of the easiest ways to minimize artifacts on MRI.
引用
- Uchida D, Amano Y, Nakatogawa H, et al. Setting pressure can change the size and shape of MRI artifacts caused by adjustable shunt valves: a study of the 4 newest models. J Neurosurg. 2018. PMID: 29775146. doi:10.3171/2017.12.JNS171533
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。