术前三维血管造影数据与术中实时血管数据通过自动患者配准结合术中CT整合于显微镜导航
本研究在7例患者(3例动静脉畸形、4例动脉瘤)中建立工作流程,将术前三维旋转血管造影或CT或磁共振血管造影数据与术中吲哚菁绿血管造影和双功能超声实时影像,通过32层移动CT低剂量配准扫描实现自动配准并整合于显微镜导航。配准误差为0.80±0.79 mm,配准CT有效辐射剂量0.28-0.42 mSv,约为标准诊断性头部CT的六分之一。结论认为配准CT成像有助于以低配准误差和低辐射暴露整合术前与术中血管影像数据。
要点
- 7例患者中3例动静脉畸形、4例动脉瘤,应用32层移动CT低剂量配准扫描实现自动配准。
- 配准误差0.80±0.79 mm,配准CT有效辐射剂量0.28-0.42 mSv,约为标准诊断性头部CT的六分之一。
- 术中实时模态可高精度共配准,三维血管结构在显微镜抬头显示和导航屏幕上以术者视角投影可视化。
核心结论
- 配准CT成像有助于以低配准误差和低辐射暴露整合术前与术中血管影像数据,改善术中三维血管解剖理解,更易识别动静脉畸形的供血血管及动脉瘤的投影和构型。
研究设计与样本
- 7例患者(3例动静脉畸形、4例动脉瘤)的工作流程建立研究,术前三维旋转血管造影或CT或磁共振血管造影数据经32层移动CT低剂量配准扫描导航,三维血管结构分割后与术中吲哚菁绿血管造影和双功能超声实时影像共配准可视化。
主要发现
- 应用术中CT自动配准获得高精度,配准误差为0.80±0.79 mm。
- 配准CT扫描的有效辐射剂量为0.28-0.42 mSv,约为标准诊断性头部CT扫描的六分之一。
- 三维血管结构可在手术显微镜抬头显示和导航屏幕上以与术者视角相同的投影准确可视化,有助于三维空间定位和更好地理解解剖。
- 术中实时模态可高精度共配准,在血管手术过程中提供进一步信息。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: To establish a workflow integrating preoperative 3-dimensional (3D) angiography data and intraoperative real-time vascular information in microscope-based navigation for aneurysm and arteriovenous malformation (AVM) surgery. METHODS: In 7 patients (3 with AVMs and 4 with aneurysms), preoperative 3D rotational angiography or computed tomography (CT) or magnetic resonance angiography data were navigated applying a 32-slice movable CT scanner for low-dose registration scanning. The 3D vasculature was segmented and visualized by microscope-based navigation along with navigated intraoperative real-time imaging data from indocyanin green angiography and duplex ultrasonography. RESULTS: Automatic registration applying intraoperative CT resulted in high accuracy (registration error, 0.80 ± 0.79 mm). The effective radiation dose of the registration CT scans (0.28-0.42 mSv) was only approximately one-sixth of a standard diagnostic head CT scan. The 3D vessel architecture could be visualized accurately in the operating microscope heads-up display and on the navigation screens in the same projection as the view angle of the surgeon, both facilitating orientation in 3D space, providing a better understanding of anatomy. In addition, intraoperative real-time modalities could be coregistered with high precision, providing further information during the course of the vascular procedure. CONCLUSIONS: Registration CT imaging facilitates integrating preoperative and intraoperative vascular image data with a low registration error and low radiation exposure for the patient, improving the understanding of 3D vascular anatomy during surgery with easier identification of feeding vessels in AVMs, and of the projection and configuration of aneurysms.
引用
- Carl B, Bopp M, Chehab S, et al. Preoperative 3-Dimensional Angiography Data and Intraoperative Real-Time Vascular Data Integrated in Microscope-Based Navigation by Automatic Patient Registration Applying Intraoperative Computed Tomography. World Neurosurg. 2018. PMID: 29454128. doi:10.1016/j.wneu.2018.02.045
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。