文献速递神经肿瘤

钻孔导板辅助切除骨内颅底脑膜瘤后一步法CAD/CAM钛颅骨修补:技术说明

One-step CAD/CAM titanium cranioplasty after drilling template-assisted resection of intraosseous skull base meningioma: technical note.
PubMed 文献 · Acta Neurochir (Wien) · 2017-01-10

本文报告两例复杂骨内蝶眶脑膜瘤患者,采用框架式钻孔导板辅助肿瘤切除,该导板同时作为计算机设计颅骨修补体的阴模,实现切除与修补一步完成,无需二次手术。导板使用高度可行,需对骨切除做小幅调整以达最佳贴合;6个月随访一例美容效果良好、一例满意。

要点

  • 框架式钻孔导板辅助骨内蝶眶脑膜瘤切除,并作为CAD/CAM钛修补体阴模。
  • 两例均实现切除与修补一步完成,无需二次手术。
  • 6个月随访美容效果一例良好、一例满意,需小幅调整骨切除以贴合植入物。

核心结论

  • 钻孔导板应用可能有助于大额底脑膜瘤的复杂病例,旨在缩短手术时间并获得良好美容效果。

研究设计与样本

  • 技术说明,报告两例复杂骨内蝶眶脑膜瘤患者,采用钻孔导板辅助切除并同期CAD/CAM钛颅骨修补。

主要发现

  • 导板使用高度可行,为达到植入物最佳贴合需对骨切除做小幅调整。
  • 6个月随访显示一例患者美容效果良好,另一例满意。
  • 无需二次手术。

关键数值与推荐

  • 植入物由DMD GmbH - Digital Medical Design/DDI-Group(德国多特蒙德)制造。

临床怎么用

  • 作者认为钻孔导板应用可能有助于大额底脑膜瘤的复杂病例,旨在缩短手术时间并获得良好美容效果。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Cranial defects following intra-osseous tumor removal may be large and require adequate reconstruction. CAD/CAM implants have been used for years to achieve an optimal cosmetic result. The disadvantage is that such implants require a second surgery. A preoperative virtual planning of resection margins and the simultaneously fabrication of the cranioplasty could be a possibility to subsume the steps tumor resection and cosmetic restoration to a single procedure. METHODS: We present two cases of patients with complex intra-osseous spheno-orbital meningioma. Tumor resection was performed with the help of a drilling template in form of a frame. The template also served as a negative for the computer-designed cranioplasty. The devices were manufactured by DMD GmbH - Digital Medical Design/DDI-Group, Dortmund, Germany. DISCUSSION: The usage of the template was highly practicable. Small adjustments in bone removal were necessary to achieve an optimal fitting of the implant. The 6-month follow-up showed for one patient a good and for one a satisfactory cosmetic result. No second surgery was necessary. CONCLUSIONS: Drilling template application could contribute to challenging cases of large fronto-basal meningiomas with the aim of minimizing operation time and achieving a good esthetic outcome.

来源:Acta Neurochir (Wien),查看原文。版权归原作者所有。

引用

  1. Carolus A, Weihe S, Schmieder K, et al. One-step CAD/CAM titanium cranioplasty after drilling template-assisted resection of intraosseous skull base meningioma: technical note. Acta Neurochir (Wien). 2017. PMID: 28074281. doi:10.1007/s00701-016-3053-4

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。