文献速递脊柱脊髓外科

缝线锚钉辅助椎体滑动截骨术治疗脊髓型颈椎病:手术技术、定量分析与临床结局

Suture Anchor-Assisted Vertebral Body Sliding Osteotomy for Cervical Myelopathy: Surgical Technique, Quantitative Analysis, and Clinical Outcomes.
PubMed 文献 · World Neurosurg · 2026-07-16

本研究评估新型缝线锚钉辅助椎体滑动截骨术(SA-VBSO)治疗复杂脊髓型颈椎病的手术精度、临床疗效与学习曲线。结果显示滑动误差0±1 mm(P=0.68),滑动准确指数102±13%(P=0.54),脊髓横截面积从50±12增至62±12 mm²(P<0.001),压缩比从24±6%改善至43±8%(P<0.001),mJOA评分从11±1升至16±1(P<0.001),学习曲线在10-12个截骨节段后达稳定平台。

要点

  • SA-VBSO以缝线锚钉实现锚定滑动控制,滑动精度高(误差0±1 mm)。
  • 术后脊髓横截面积与压缩比显著改善,减压效果确切。
  • 学习曲线在10-12个截骨节段后趋于稳定,可重复性较好。

核心结论

  • SA-VBSO是传统椎体滑动截骨术的可行、精确且可能可重复的改良术式。
  • 锚定滑动控制解决了「滑动控制困境」,学习曲线可控,为复杂前路颈椎重建提供可靠技术选择。

研究设计与样本

  • 采用缝线锚钉进行锚定滑动控制,替代传统笨重钳夹。
  • 使用相邻后椎体线法量化计划与实际滑动的精度。

主要发现

  • 平均绝对滑动误差为0±1 mm(P=0.68),滑动准确指数为102±13%(P=0.54)。
  • 脊髓横截面积从50±12 mm²增至62±12 mm²(P<0.001),压缩比从24±6%改善至43±8%(P<0.001)。
  • C2-C7 Cobb角从3°改善至9°(P=0.032),mJOA评分从11±1升至16±1(P<0.001)。
  • 学习曲线在10至12个截骨节段后达到稳定效率平台。

临床怎么用

  • 对于复杂脊髓型颈椎病,SA-VBSO可作为一种精确且可重复的前路截骨重建技术。
  • 术中采用缝线锚钉实现滑动控制,有助于提高滑动精度并简化操作。
  • 学习曲线约10-12个截骨节段后趋于稳定,适合有一定颈椎手术经验的团队开展。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: Traditional Vertebral Body Sliding Osteotomy is technically demanding with variable precision. This study evaluates the surgical precision, clinical efficacy, and learning curve of the novel Suture Anchor-Assisted Vertebral Body Sliding Osteotomy (SA-VBSO) for complex cervical myelopathy. METHODS: Seventeen consecutive patients (21 osteotomy vertebrae) underwent SA-VBSO. A suture anchor was used for anchor-mediated sliding control, replacing traditional bulky clamps. Precision was quantified using the Adjacent Posterior Vertebral Line method to compare planned versus actual sliding. Decompression was assessed via magnetic resonance imaging cross-sectional area (CSA) and compression ratios. The learning curve was analyzed using chronological procedural times for osteotomies and cage insertions. RESULTS: All procedures were successful without systematic bias; mean absolute sliding error was 0 ± 1 mm (P = 0.68) and Sliding Accuracy Index was 102 ± 13% (P = 0.54). Radiographic analysis confirmed robust decompression: mean spinal cord cross-sectional area increased from 50 ± 12 to 62 ± 12 mm2 (P < 0.001), and compression ratio improved from 24 ± 6 to 43 ± 8% (P < 0.001). Sagittal alignment improved significantly (C2-C7 Cobb's angle: 3°-9°, P = 0.032). Mean modified Japanese Orthopaedic Association scores rose from 11 ± 1 to 16 ± 1 (P < 0.001). Learning curve analysis demonstrated rapid procedural acceleration, reaching a steady efficiency plateau after 10 to 12 osteotomy segments. CONCLUSIONS: SA-VBSO is a feasible, precise, and potentially reproducible refinement of traditional Vertebral Body Sliding Osteotomy. By establishing anchor-mediated sliding control, it resolves the "sliding control dilemma" and features a manageable learning curve, offering a reliable technical alternative for complex anterior cervical reconstruction.

来源:World Neurosurg,查看原文。版权归原作者所有。

引用

  1. Chang HC, Chen LP, Chang TK, et al. Suture Anchor-Assisted Vertebral Body Sliding Osteotomy for Cervical Myelopathy: Surgical Technique, Quantitative Analysis, and Clinical Outcomes. World Neurosurg. 2026. PMID: 42462845. doi:10.1016/j.wneu.2026.125194

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。