文献速递功能神经外科神经重症

三维表面扫描在立体定向神经外科注册中的尸体可行性研究

Three-dimensional surface scanning for registration in stereotactic neurosurgery: a cadaveric feasibility study.
PubMed 文献 · J Neurosurg · 2025-11-28

该尸体研究评估三维表面扫描(3DSS)替代术中CT用于立体定向框架注册的可行性、准确性和导航兼容性。3DSS与CT融合平均表面偏差约0.4毫米,框架对齐均方根误差1.3毫米,导航系统内平均基准注册误差0.14毫米,优于常规CT方法的0.20毫米。结论认为3DSS可实现亚毫米级精准注册,无需术中CT,减少辐射暴露和手术复杂性。

要点

  • 3DSS与CT融合平均表面偏差约0.4毫米,框架对齐均方根误差1.3毫米。
  • 导航系统内3DSS工作流平均基准注册误差0.14毫米,优于CT方法的0.20毫米。
  • 3DSS方法无需术中CT,可减少辐射暴露和手术复杂性,与现有导航系统兼容。

核心结论

  • 3DSS方法可实现精准的亚毫米级立体定向注册,无需术中CT,减少辐射暴露和手术复杂性。

研究设计与样本

  • 尸体研究:对安装立体定向框架组件的人尸体头进行薄层CT和结构光3DSS成像。
  • 使用多步点云对齐流程(快速点特征直方图、随机样本一致性方法、迭代最近点算法)配准CT、3DSS和CAD模型。
  • 在商用神经导航平台内评估表面偏差误差、均方根误差(RMSE)和基准注册误差。

主要发现

  • 3D面部扫描与CT融合的平均表面偏差误差约0.4毫米。
  • 3DSS衍生的N-bar定位器与其CAD参考模型配准的框架对齐RMSE为1.3毫米。
  • 导航系统内3DSS工作流的平均基准注册误差为0.14毫米(范围0.02-0.20毫米),优于常规CT方法(平均误差0.20毫米,范围0.09-0.40毫米)。

临床怎么用

  • 3DSS可作为立体定向神经外科中无需辐射的替代注册方法,与现有导航系统完全兼容。

局限性

  • 研究仅基于一具人尸体头,未来需自动化框架检测、整合人工智能驱动融合方法并在活体手术环境中验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: Achieving submillimetric accuracy in stereotactic neurosurgery remains critical for safely targeting deep brain structures. Current workflows rely on intraoperative CT to register stereotactic frames to preoperative imaging, but this introduces additional radiation exposure, cost, and workflow complexity. Three-dimensional surface scanning (3DSS) potentially offers a fast radiation-free alternative capable of capturing detailed craniofacial anatomy and frame geometry. Therefore, the aim of this cadaveric study was to evaluate the feasibility, accuracy, and navigational compatibility of integrating 3DSS into stereotactic workflows as a potential replacement for intraoperative CT. METHODS: A human cadaveric head was imaged with both thin-slice CT and structured-light 3DSS after mounting stereotactic frame components. CT, 3DSS, and computer-aided design (CAD) models were registered using a multistep point cloud alignment pipeline involving the fast point feature histogram, the random sample consensus method, and the iterative closest point algorithm. Accuracy was assessed using surface deviation error, root mean square error (RMSE), and fiducial registration error within a commercial neuronavigation platform. RESULTS: Fusion of the 3D facial scan with CT provided a mean surface deviation error of approximately 0.4 mm. Registration of the 3DSS-derived N-bar localizer to its CAD reference model produced a frame alignment RMSE of 1.3 mm. Within the navigation system, the 3DSS-based workflow achieved a mean fiducial registration error of 0.14 mm (range 0.02-0.20 mm), outperforming the conventional CT-based method (mean error 0.20 mm, range 0.09-0.40 mm). CONCLUSIONS: The 3DSS-based method enabled precise submillimetric stereotactic registration without the need for intraoperative CT, reducing radiation exposure and operative complexity. This workflow is fully compatible with existing navigation systems and could serve as a practical radiation-free alternative in stereotactic neurosurgery. Future work will focus on automating frame detection, incorporating artificial intelligence-driven fusion methods, and validating this approach in live surgical settings.

来源:J Neurosurg,查看原文。版权归原作者所有。

引用

  1. Sharaf BA, Hussein SM, Koller AL, et al. Three-dimensional surface scanning for registration in stereotactic neurosurgery: a cadaveric feasibility study. J Neurosurg. 2025. PMID: 41343819. doi:10.3171/2025.7.JNS25870

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。