文献速递脊柱脊髓外科

单侧双通道内镜联合3D打印治疗胸椎黄韧带骨化

Innovative Approaches in Thoracic Surgery: Unilateral Biportal Endoscopy and 3D Printing in Managing Ligamentum Flavum Ossification.
PubMed 文献 · World Neurosurg · 2025-09-16

本研究纳入21例影像学诊断并符合手术指征的胸椎黄韧带骨化(TOLF)患者,评估单侧双通道内镜(UBE)联合3D打印技术的临床疗效。结果显示该技术微创、恢复快、疗效确切,可显著减少神经功能恶化等并发症。

要点

  • UBE联合3D打印可用于TOLF的微创减压,术后1年恢复率单纯TOLF为70±11%。
  • 双节段病例恢复率为57±9.4%,手术时间与引流量高于单节段。
  • 仅2例出现术后脑脊液漏,未见神经损伤、深静脉血栓及切口感染。

核心结论

  • 单侧双通道内镜联合3D打印技术治疗TOLF具有微创、恢复快、疗效确切的优势,可显著减少神经功能恶化等并发症。

研究设计与样本

  • 回顾性纳入21例经影像学诊断TOLF且符合手术指征的患者,记录人口学资料、手术时间、引流量及并发症,采用改良日本骨科协会评分评估术前术后神经功能,并用CT、MRI、椎管横截面积及3D打印模型评估减压效果。

主要发现

  • 21例中15例行单节段减压、6例行双节段减压。
  • 单节段减压平均手术时间95分钟,双节段平均125分钟。
  • 单节段平均引流量48 mL,双节段80 mL。
  • 术后1年平均恢复率单纯TOLF为70±11%,双节段病例为57±9.4%。
  • 仅2例出现术后脑脊液漏,未见下肢深静脉血栓、神经损伤及手术部位感染。

临床怎么用

  • 对于影像学确诊且符合手术指征的TOLF患者,可考虑采用UBE联合3D打印技术行微创减压,并关注双节段病例手术时间与引流量增加及脑脊液漏风险。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: The objective of this study was to assess the clinical efficacy of unilateral biportal endoscopy technology in conjunction with three-dimensional (3D) printing technology for treating thoracic spinal stenosis caused by thoracic ligamentum flavum ossification (TOLF). METHODS: A total of 21 patients diagnosed with TOLF through imaging who met surgical indications were selected. Demographic data, including sex, age, affected segments, etiological factors, operation duration, drainage volume, and postoperative complications, were documented. The modified Japanese Orthopaedic Association score was used to evaluate neurological function before and after the surgical intervention. Postoperative complications, including lower extremity deep vein thrombosis, neurological injury, cerebrospinal fluid leakage, and surgical site infection, were also recorded. Imaging studies, including computed tomography, magnetic resonance imaging, cross-sectional area of the spinal canal, and 3D printing models, were utilized to evaluate spinal cord compression and decompression outcomes. RESULTS: Among the 21 patients, 15 underwent single-segment decompression, and 6 underwent double-segment decompression. The average operation time for single-segment decompression was 95 minutes, while double-segment decompression averaged 125 minutes. The average drainage volume was 48 mL for single-segment and 80 mL for double-segment procedures. Computed tomography, magnetic resonance imaging, cross-sectional area of the spinal canal, and 3D-printed models demonstrated a significant increase in the effective volume of the spinal canal. The average recovery rate at 1 year postsurgery for patients with simple TOLF was recorded at 70 ± 11%, while that for double-segment cases was 57 ± 9.4%. There were no instances of lower extremity deep vein thrombosis, neurological injury, or surgical site infection among the patients. Only 2 patients experienced postoperative cerebrospinal fluid leakage. CONCLUSIONS: Unilateral biportal endoscopy technology combined with 3D printing technology offers advantages such as minimal invasiveness, rapid recovery, and definite efficacy in the treatment of TOLF. This approach can significantly mitigate complications such as neurological deterioration.

来源:World Neurosurg,查看原文。版权归原作者所有。

引用

  1. Zhang HQ, Fan XG, Wang LS, et al. Innovative Approaches in Thoracic Surgery: Unilateral Biportal Endoscopy and 3D Printing in Managing Ligamentum Flavum Ossification. World Neurosurg. 2025. PMID: 40967316. doi:10.1016/j.wneu.2025.124472

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。