力控制技术是胸腰椎融合手术安全高效的外科技术吗?一项上市后临床随访研究
这项文献对照观察性研究纳入75例胸腰椎融合患者,评估支持力控制技术的椎弓根螺钉系统的安全性和有效性。术后1年螺钉松动率为2.7%,非劣效于对照组的9.2%(P=0.005);Oswestry功能障碍指数平均改善49.3,非劣效于对照组的35.2(P<0.001)。结论认为力控制技术是安全有效的方法。
要点
- 术后1年螺钉松动率力控制组2.7%,非劣效于对照组9.2%(P=0.005)。
- Oswestry功能障碍指数平均改善力控制组49.3,非劣效于对照组35.2(P<0.001)。
- 植入物相关翻修率为4.1%,主要诊断为创伤(73.3%)。
核心结论
- 力控制技术旨在通过控制预期和非预期的力来实现最无应力的固定,是安全有效的方法。
- 轻量化器械设计用于识别、控制和减少机械应力。
- 患者在螺钉松动和临床结局方面从力控制技术中获益。
研究设计与样本
- 文献对照观察性研究,纳入75例接受支持力控制技术的椎弓根螺钉系统手术的患者。
- 安全性通过术后1年螺钉松动率的非劣效性证明,有效性通过Oswestry功能障碍指数改善的非劣效性证明。
- 次要终点包括2年Oswestry功能障碍指数、脊柱相关不良事件和结局,统计显著性为P<0.025(Bonferroni校正0.05/2)。
主要发现
- 主要诊断为创伤(73.3%)、椎管狭窄(17.3%)和退行性椎间盘疾病(6.7%)。
- 术后1年螺钉松动率力控制组为2.7%,非劣效于对照组9.2%(P=0.005)。
- Oswestry功能障碍指数平均改善力控制组为49.3,非劣效于对照组35.2(P<0.001)。
- 2年平均Oswestry功能障碍指数为19,平均视觉模拟量表背痛评分从80.3改善至3个月时24.1和1年时21.6。
- 植入物相关翻修率为4.1%。
关键数值与推荐
- 螺钉松动率非劣效性检验P=0.005,Oswestry功能障碍指数改善非劣效性检验P<0.001。
- 统计显著性阈值P<0.025(Bonferroni校正0.05/2)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Early screw loosening, a relevant complication after posterior thoracolumbar fusion, indicates high mechanical stress during rod connection. Force Control is a surgical technology that goes beyond the usual to identify, control, and minimize intended and unintended, usually unnoticed forces to achieve the most stressless fixation. Optimized, extremely lightweight instruments support this principle on part of the pedicle screw system (PSS). The study objective is to evaluate the safety and efficacy of a novel PSS for Force Control fusion surgery. METHODS: In this literature-controlled observational study, patients underwent surgery with a PSS that supports Force Control. Safety is demonstrated 1 year postoperatively by noninferiority in screw loosening rate and efficacy by noninferiority in Oswestry Disability Index (ODI) improvement. Secondary endpoints: 2-year ODI, spine-related adverse events, and outcomes. Statistical significance: P < 0.025 (Bonferroni correction 0.05/2). RESULTS: 75 patients enrolled, main diagnoses were trauma (73.3%), spinal stenosis (17.3%), and degenerative disc disease (6.7%). Screw loosening rate at 1 year was 2.7%, being not inferior (P = 0.005) to the control group at 9.2%. Mean ODI improvement of 49.3 showed noninferiority (P < 0.001) versus 35.2 in the control group. Mean 2-year ODI was 19, mean visual analog scale back pain improved from 80.3 to 24.1 (3 months) and 21.6 (1 year). The implant-related revision rate was 4.1%. CONCLUSIONS: Force Control, aiming to go beyond the familiar by controlling intended and unintended forces to achieve the most stressless fixation, is a safe and efficient method. Lightweight instruments are designed to allow identifying, controlling, and reducing mechanical stress. Patients benefit from Force Control regarding screw loosening and clinical outcome.
引用
- Noriega DC, Ardura F, Awad K, et al. Is Force Control a Safe and Efficient Surgical Technology for Thoracolumbar Fusion Surgery? A Post Market Clinical Follow-Up Study. World Neurosurg. 2025. PMID: 39983986. doi:10.1016/j.wneu.2025.123812
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。