文献速递脊柱脊髓外科

基于深度学习的颈椎后纵韧带骨化CT图像分割与脊髓压迫评估:一项双中心研究

Deep Learning-Based Segmentation of Cervical Posterior Longitudinal Ligament Ossification in Computed Tomography Images and Assessment of Spinal Cord Compression: A Two-Center Study.
PubMed 文献 · World Neurosurg · 2025-01-09

本研究开发基于三维U-Net的深度学习模型,在307例患者CT图像上自动分割颈椎后纵韧带骨化灶并测量骨化厚度与椎管压迫系数。模型在训练集、内部验证集、外部测试集的平均Dice系数分别为0.81、0.75、0.71,与放射科医师测量的一致性ICC为0.958(骨化厚度)和0.974(残余椎管直径)。

要点

  • 双中心纳入307例患者,训练集、内部验证集、外部测试集平均Dice系数分别为0.81、0.75、0.71。
  • 骨化厚度与残余椎管直径的ICC分别为0.958和0.974,与放射科医师测量一致性高。
  • 模型能有效检测并分离CT图像上的后纵韧带骨化灶,量化脊髓压迫指标的性能与放射科医师相当。

核心结论

  • 所提出的深度学习模型能有效检测并分离CT图像上的后纵韧带骨化灶,在量化脊髓压迫指标方面与放射科医师表现相当。

研究设计与样本

  • 双中心研究纳入307例患者,其中上海长征医院260例、西南医科大学附属中医医院47例。
  • 由4名经验丰富的放射科医师手动分割后纵韧带骨化灶,开发基于三维U-Net框架的深度学习模型进行自动分割。
  • 系统测量骨化最厚处厚度及对应层面椎管直径,采用Dice相似系数、平均表面距离及组内相关系数(ICC)评估分割性能。
  • 从训练集随机选取30例,用ICC和Bland-Altman图评估放射科医师与深度学习系统测量骨化厚度、最大压迫处残余椎管直径及颈椎脊髓压迫系数的一致性。

主要发现

  • 深度学习系统在训练集、内部验证集、外部测试集的平均Dice相似系数分别为0.81、0.75、0.71。
  • 平均表面距离在训练集为1.30、内部验证集为2.35、外部测试集为2.63。
  • 骨化厚度测量的ICC为0.958,残余椎管直径测量的ICC为0.974。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: This study aims to develop a fully automated, computed tomography (CT)-based deep learning (DL) model to segment ossified lesions of the posterior longitudinal ligament and to measure the thickness of the ossified material and calculate the cervical spinal cord compression factor. METHODS: A total of 307 patients were enrolled, with 260 patients from Shanghai Changzheng Hospital, and 47 patients from the Traditional Chinese Medicine Hospital of Southwest Medical University. CT images were used to manually segment the Ossification of the posterior longitudinal ligament (OPLL) by 4 experienced radiologists. The DL model employing a 3-dimensional U-Net framework was developed to segment the OPLLs. The system also measures the thickness of the ossified material at its thickest point and the diameter of the spinal canal at the corresponding level. Segmentation performance was evaluated using the Dice Similarity Coefficient, Average Surface Distance, and intraclass correlation coefficient (ICC) between ground truth and segmentation volumes. Concordance between the radiologists' and the DL system's measurements of the ossified material thickness, residual spinal canal diameter at maximum compression, and cervical spinal cord compression coefficient was assessed in a randomly selected subset of 30 cases from the training set using ICCs and Bland-Altman plots. RESULTS: The DL system demonstrated average Dice Similarity Coefficient of 0.81, 0.75, and 0.71 for the training, internal validation, and external test sets, respectively. The mean Average Surface Distance was 1.30 for the training set, 2.35 for the internal validation set, and 2.63 for the external test set. The ICC values of 0.958 for the thickness of the ossified material and 0.974 for the residual canal diameter measurement. CONCLUSIONS: The proposed DL model effectively detects and separates ossification foci in OPLL on CT images. It exhibits comparable performance to radiologists in quantifying spinal cord compression metrics.

来源:World Neurosurg,查看原文。版权归原作者所有。

引用

  1. Jiang B, Yan J, Xu S, et al. Deep Learning-Based Segmentation of Cervical Posterior Longitudinal Ligament Ossification in Computed Tomography Images and Assessment of Spinal Cord Compression: A Two-Center Study. World Neurosurg. 2025. PMID: 39694139. doi:10.1016/j.wneu.2024.123567

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。