使用定制3D模具的聚甲基丙烯酸甲酯颅骨成形术的成本效益:秘鲁儿科首次经验
该病例系列描述5例大范围颅骨缺损患儿使用定制3D模具和聚甲基丙烯酸甲酯(PMMA)行颅骨成形术。术后无并发症,所有患者获得良好美学和功能结果,每例植入物成本约350美元,而该国计算机辅助设计(CAD)植入物成本为10000至20000美元。作者认为该技术安全、低成本,相比CAD植入物成本降低95%-97%,可使中低收入国家患者受益。
要点
- 5例大范围颅骨缺损患儿使用定制3D模具和PMMA行颅骨成形术,术后无并发症。
- 所有患者获得良好美学和功能结果,每例植入物成本约350美元。
- 该国CAD植入物成本为10000至20000美元,该技术成本降低95%-97%。
核心结论
- 使用PMMA和3D定制模具的颅骨成形术是一种安全且低成本的技术,可使中低收入国家患者受益。
- 与CAD植入物相比,成本降低95%-97%,该技术可在中低收入国家大规模实施并带来显著益处。
研究设计与样本
- 病例系列,描述5例大范围颅骨缺损患者使用定制3D模具和PMMA行颅骨成形术。
- 根据断层扫描研究虚拟设计颅骨缺损骨植入物模型,并按缺损规格构建模具。
- 模具使用丙烯腈-丁二烯-苯乙烯进行3D打印,术中使用无菌模具以PMMA设计植入物并完成颅骨成形术。
- 评估术后演变、并发症和植入物成本。
主要发现
- 术后未观察到并发症。
- 所有患者获得良好美学和功能结果。
- 使用该技术的每例患者植入物成本约为350美元。
- 在该国,CAD植入物成本在10000至20000美元之间。
- 与CAD植入物相比,成本降低95%-97%。
临床怎么用
- 作者认为使用PMMA和3D定制模具的颅骨成形术是一种安全且低成本的技术,可使中低收入国家患者受益。
- 作者认为该技术可在中低收入国家大规模实施并带来显著益处。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Biocompatible computer-assisted design (CAD) implants for cranioplasty are associated with high costs and considerable waiting time. We present the results of the first cranioplasty experience in our country using polymethylmethacrylate (PMMA) with customized 3D molds of the cranial defect. METHODS: We present a case series describing five patients with extensive cranial defects who underwent cranioplasty with PMMA using customized 3D molds. From tomographic studies, a bone implant model for the cranial defect was virtually designed and a mold was built according to the specifications of the defect. The mold was printed in 3D using acrylonitrile-butadiene-styrene. With the sterile mold, the implant could be designed intraoperatively with PMMA to perform the cranioplasty. The evolution, complications, and cost of the implant were evaluated. RESULTS: No postoperative complications were observed. Good aesthetic and functional results were achieved in all patients. The cost of the implant per patient using our technique was approximately $350 USD. In our country, the cost of CAD implants varies between $10000 and $20000 USD. CONCLUSIONS: Cranioplasty with PMMA and 3D custom mold is a safe and low-cost technique that would benefit patients in middle- and low-income countries. Compared to CAD implants, the cost was reduced by 95%-97%. This technique can be implemented on a large scale with remarkable benefits in low- and middle-income countries.
引用
- Flores-Sanchez JD, Perez Chadid DA, Azmi A, et al. Cost-Effectiveness of Cranioplasty with Polymethylmethacrylate Using a Customized 3D Mold: A Pediatric First Experience in Peru. World Neurosurg. 2024. PMID: 39522818. doi:10.1016/j.wneu.2024.10.139
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。