血液透析机报废拆解分析:回收潜力有限
该研究拆解了两台报废血液透析机(5008 CorDiax 与 Artis/Evosys),按重量分析塑料、金属、混合材料及电子元件构成,并记录拆解时间。结果显示混合材料占比高、塑料多为树脂混合物,回收潜力很低;手动拆解至大部件约需12小时,拆至单一材料至少需35小时。作者呼吁从摇篮到摇篮理念重新设计透析机。
要点
- 透析机报废时混合材料占比高,塑料多为树脂混合物,回收潜力很低。
- 手动拆解至大部件约12小时,拆至单一材料至少35小时,拆解成本高。
- 需从摇篮到摇篮理念重新设计透析机以减少报废废弃物。
核心结论
- 血液透析机在生命周期终点产生废弃物且回收潜力低,需从摇篮到摇篮视角重新设计。
研究设计与样本
- 拆解两台已到使用期限的透析机:一台5008 CorDiax(Fresenius Medical Care AG)和一台Artis/Evosys(Gambro AB),按重量与主要成分分析并记录拆解时间。
- 对15个塑料元件样本进一步用傅里叶变换红外光谱研究,并与制造商提供的数据比较。
- 法国法规规定透析机使用期限为10–12年;全球每年约有100,000台透析机结束生命周期。
主要发现
- 拆解的透析机分别重125.0 kg和141.4 kg;第一台塑料、金属、混合材料、电子元件分别占28%、15%、51%、6%。
- 第二台塑料、金属、混合材料、电子元件分别占28%、19%、40%、13%。
- 手动拆解透析机至大部件约需12小时,拆解至单一材料至少需1个工作周(35小时)。
- 塑料元件多为树脂混合物,使其回收潜力可忽略不计。
临床怎么用
- 肾内科及透析中心应关注透析机报废环节的废弃物产生与低回收潜力,在设备选型与报废管理中考虑环境成本。
- 推动厂商从摇篮到摇篮理念设计透析机,以提升可拆解性与材料可回收性。
局限性
- 仅拆解分析了两台透析机(来自两家市场份额最大的公司各一台),样本量有限。
- 拆解时间与回收潜力评估基于手动拆解至大部件及单一材料的操作,可能受操作方式影响。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
KEY POINTS: Hemodialysis machines contribute to waste production at the end of their life cycle and have a low recycling potential. We studied the composition of the components of hemodialysis machines in terms of plastics, metal, and mixed materials. There is a need to rethink the design of hemodialysis machines in a cradle-to-cradle perspective. BACKGROUND: Hemodialysis contributes significantly to health care's carbon footprint. Worldwide, approximately 100,000 dialysis machines end their life cycle each year. Our aim was to analyze the composition and potential for recyclability of two dialysis machines, from the two companies with the largest market share, which had met their end-of-use terms (10–12 years of use according to French regulations). METHODS: One 5008 CorDiax (Fresenius Medical Care AG) and one Artis/Evosys (Gambro AB) were dismantled, and each piece was analyzed in terms of weight and principal components (plastic, metal, mixed materials, and electronic components). The time needed to disassemble the machine was recorded. Samples of 15 plastic elements were further studied using Fourier-transform infrared spectroscopy. The results were compared with the data provided by the manufacturers. RESULTS: The dismantled hemodialysis machines weighed 125.0 kg and 141.4 kg; plastic, metal, mixed materials, and electronic components accounted for 28%, 15%, 51%, and 6% of the first machine's weight and 28%, 19%, 40%, and 13% of the second's, respectively. The time needed to manually disassemble a dialysis machine into macro elements was around 12 hours. Dismantling into single materials was evaluated as needing at least 1 workweek (35 hours). The plastic elements were mostly a mixture of resins (petroleum-based material used to manufacture plastics), which makes their recycling potential negligible. CONCLUSIONS: This study demonstrates that hemodialysis machines contribute to waste production at the end of their life cycle, with low recycling potential, and underlines the need to rethink their design in a cradle-to-cradle perspective.
引用
- Bonnet C, Torreggiani M, Bianco L, et al. Autopsy of a Hemodialysis Machine: Potential for Recycling at the End of the Life Cycle. J Am Soc Nephrol. 2024. PMID: 39671255. doi:10.1681/ASN.0000000584
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。