文献速递血液净化与透析

隧道式血液透析导管尖端设计与导管功能障碍风险:澳大利亚全国队列研究

Tunneled Hemodialysis Catheter Tip Design and Risk of Catheter Dysfunction: An Australian Nationwide Cohort Study.
PubMed 文献 · Am J Kidney Dis · 2023-12-06

该研究基于澳大利亚全国REDUCCTION试验数据,纳入4722例接受隧道式中心静脉导管的成人血液透析患者,评估导管尖端设计(对称型、阶梯型、分叉型)与导管功能障碍导致拔管的时间关系。调整分析显示,阶梯型尖端导管因功能障碍拔管的风险显著高于对称型(调整时间比0.47, 95%CI 0.33-0.67)和分叉型(0.24, 95%CI 0.11-0.51)。对称型和分叉型尖端导管功能障碍风险较低。

要点

  • 阶梯型尖端导管因功能障碍拔管的风险显著高于对称型(调整时间比0.47)和分叉型(0.24)。
  • 对称型尖端导管性能优于阶梯型,分叉型使用较少但风险与对称型相似。
  • 临床可优先选用对称型而非阶梯型隧道式血液透析导管以减少机械故障。

核心结论

  • 对称型和分叉型尖端导管因功能障碍需拔管的风险低于阶梯型尖端导管。

研究设计与样本

  • 观察性队列研究,使用澳大利亚全国REDUCCTION试验数据,纳入4722例成人血液透析患者(2016年12月至2020年3月,37家肾脏病服务机构)。

主要发现

  • 对称型、阶梯型、分叉型尖端导管分别有355/3871(9.2%)、262/1888(13.9%)、38/455(8.4%)因功能障碍需拔管。
  • 阶梯型尖端导管因功能障碍拔管的速度比对称型快53%(调整时间比0.47, 95%CI 0.33-0.67),比分叉型快76%(调整时间比0.24, 95%CI 0.11-0.51)。
  • 仅对称型尖端导管在未调整和敏感性分析中性能优于阶梯型;分叉型使用较少,功能障碍风险与对称型相似。
  • 其他并发症需拔管、常规拔管及拔管前死亡的累积发生率在三种尖端设计间相似。

临床怎么用

  • 在选择隧道式血液透析导管时,优先使用对称型尖端设计而非阶梯型,以降低导管功能障碍导致拔管的风险。
  • 分叉型尖端导管性能良好但使用经验有限,需进一步研究验证。

局限性

  • 导管尖端设计非随机分配,存在选择偏倚可能。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

RATIONALE & OBJECTIVE: Hemodialysis catheter dysfunction is an important problem for patients with kidney failure. The optimal design of the tunneled catheter tip is unknown. This study evaluated the association of catheter tip design with the duration of catheter function. STUDY DESIGN: Observational cohort study using data from the nationwide REDUCCTION trial. SETTING & PARTICIPANTS: 4,722 adults who each received hemodialysis via 1 or more tunneled central venous catheters in 37 Australian nephrology services from December 2016 to March 2020. EXPOSURE: Design of tunneled hemodialysis catheter tip, classified as symmetrical, step, or split. OUTCOME: Time to catheter dysfunction requiring removal due to inadequate dialysis blood flow assessed by the treating clinician. ANALYTICAL APPROACH: Mixed, 3-level accelerated failure time model, assuming a log-normal survival distribution. Secular trends, the intervention, and baseline differences in service, patient, and catheter factors were included in the adjusted model. In a sensitivity analysis, survival times and proportional hazards were compared among participants' first tunneled catheters. RESULTS: Among the study group, 355 of 3,871 (9.2%), 262 of 1,888 (13.9%), and 38 of 455 (8.4%) tunneled catheters with symmetrical, step, and split tip designs, respectively, required removal due to dysfunction. Step tip catheters required removal for dysfunction at a rate 53% faster than symmetrical tip catheters (adjusted time ratio, 0.47 [95% CI, 0.33-0.67) and 76% faster than split tip catheters (adjusted time ratio, 0.24 [95% CI, 0.11-0.51) in the adjusted accelerated failure time models. Only symmetrical tip catheters had performance superior to step tip catheters in unadjusted and sensitivity analyses. Split tip catheters were infrequently used and had risks of dysfunction similar to symmetrical tip catheters. The cumulative incidence of other complications requiring catheter removal, routine removal, and death before removal were similar across the 3 tip designs. LIMITATIONS: Tip design was not randomized. CONCLUSIONS: Symmetrical and split tip catheters had a lower risk of catheter dysfunction requiring removal than step tip catheters. FUNDING: Grants from government (Queensland Health, Safer Care Victoria, Medical Research Future Fund, National Health and Medical Research Council, Australia), academic (Monash University), and not-for-profit (ANZDATA Registry, Kidney Health Australia) sources. TRIAL REGISTRATION: Registered at ANZCTR with study number ACTRN12616000830493. PLAIN-LANGUAGE SUMMARY: Central venous catheters are widely used to facilitate vascular access for life-sustaining hemodialysis treatments but often fail due to blood clots or other mechanical problems that impede blood flow. A range of adaptations to the design of tunneled hemodialysis catheters have been developed, but it is unclear which designs have the greatest longevity. We analyzed data from an Australian nationwide cohort of patients who received hemodialysis via a tunneled catheter and found that catheters with a step tip design failed more quickly than those with a symmetrical tip. Split tip catheters performed well but were infrequently used and require further study. Use of symmetrical rather than step tip hemodialysis catheters may reduce mechanical failures and unnecessary procedures for patients.

来源:Am J Kidney Dis,查看原文。版权归原作者所有。

引用

  1. Lazarus B, Polkinghorne KR, Gallagher M, et al. Tunneled Hemodialysis Catheter Tip Design and Risk of Catheter Dysfunction: An Australian Nationwide Cohort Study. Am J Kidney Dis. 2023. PMID: 38061534. doi:10.1053/j.ajkd.2023.09.021

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。