文献速递质量管理与危急值

利用长期质控与室间质评数据估算医学实验室测量不确定度的方法

An approach for estimating measurement uncertainty in medical laboratories using data from long-term quality control and external quality assessment schemes.
PubMed 文献 · Clin Chem Lab Med · 2017-01-01

本研究基于ISO 15189对医学实验室估算测量不确定度(MU)的要求,提出了一种MU估算方法:识别定量检测项目、按临床目的分类、确定各MU分量的估算标准。利用2016年长期室内质控(IQC)结果估算不精密度,利用2015-2016年室间质评(EQA)结果估算偏倚及偏倚不确定度。共分析263个测量程序,结果显示偏倚不确定度是MU的次要因素,而偏倚分量是所有研究样本基质中最主要的贡献者。

要点

  • MU估算方法包括识别定量项目、按临床目的分类、确定各分量估算标准。
  • 不精密度用长期IQC结果估算,偏倚及偏倚不确定度用EQA结果估算。
  • 偏倚是MU的主要贡献者,偏倚不确定度贡献较小。

核心结论

  • 所选MU估算模型可标准化偏倚计算,并契合检验结果的适用性目的。
  • MU估算可结合长期IQC不精密度与EQA偏倚数据,作为监测分析质量的有用工具。

研究设计与样本

  • 方法学研究,分析263个测量程序。
  • 不精密度基于2016年长期IQC结果,偏倚及偏倚不确定度基于2015-2016年EQA结果。

主要发现

  • 51个测量程序仅用不精密度估算MU。
  • 22个测量程序因EQA结果未提供可靠统计量而无法估算偏倚分量。
  • 28个测量程序根据分析物浓度水平计算了两个或以上MU值。
  • 偏倚不确定度是MU的次要因素,偏倚分量是所有研究样本基质中最主要的贡献者。

关键数值与推荐

  • 按检测目的分类:51个测量程序仅用不精密度估算MU。
  • 22个测量程序偏倚分量不可估算,因EQA结果无可靠统计量。
  • 28个测量程序按分析物浓度水平计算多个MU值。

临床怎么用

  • 医学实验室可结合长期IQC不精密度与EQA偏倚数据估算MU,用于监测检验结果分析质量。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The present study was prompted by the ISO 15189 requirements that medical laboratories should estimate measurement uncertainty (MU). METHODS: The method used to estimate MU included the: a) identification of quantitative tests, b) classification of tests in relation to their clinical purpose, and c) identification of criteria to estimate the different MU components. Imprecision was estimated using long-term internal quality control (IQC) results of the year 2016, while external quality assessment schemes (EQAs) results obtained in the period 2015-2016 were used to estimate bias and bias uncertainty. RESULTS: A total of 263 measurement procedures (MPs) were analyzed. On the basis of test purpose, in 51 MPs imprecision only was used to estimate MU; in the remaining MPs, the bias component was not estimable for 22 MPs because EQAs results did not provide reliable statistics. For a total of 28 MPs, two or more MU values were calculated on the basis of analyte concentration levels. Overall, results showed that uncertainty of bias is a minor factor contributing to MU, the bias component being the most relevant contributor to all the studied sample matrices. CONCLUSIONS: The model chosen for MU estimation allowed us to derive a standardized approach for bias calculation, with respect to the fitness-for-purpose of test results. Measurement uncertainty estimation could readily be implemented in medical laboratories as a useful tool in monitoring the analytical quality of test results since they are calculated using a combination of both the long-term imprecision IQC results and bias, on the basis of EQAs results.

来源:Clin Chem Lab Med,查看原文。版权归原作者所有。

引用

  1. Padoan A, Antonelli G, Aita A, et al. An approach for estimating measurement uncertainty in medical laboratories using data from long-term quality control and external quality assessment schemes. Clin Chem Lab Med. 2017. PMID: 28245184. doi:10.1515/cclm-2016-0896

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。