扩展多重临床检测的质量控制程序
针对多重检测中各分析物可独立失败导致传统统计QC假拒绝率过高的问题,开发随机模拟软件qcsim评估复杂QC规则组合的检测效能,并证明通过高分析性能或多次QC重复可控制假拒绝率,对基于模式的分类检测,分类器算法细节决定关键分析物和QC设计严格度。
要点
- 高分析性能(低不精密度)或多次QC重复可控制多重检测的假拒绝率。
- 基于模式的检测中,分类器算法决定关键分析物与QC严格度。
- qcsim可模拟任意多重度和控制水平的QC规则组合效能。
核心结论
- 多种QC策略可将1000-plex多重检测的控制水平控制在与传统单分析物QC方案相当的程度。
研究设计与样本
- 开发随机模拟软件qcsim,计算并可视化复杂QC规则组合(含传统Westgard规则及多次QC重复的统计检验)的检测效能,支持任意多重度和控制水平。
主要发现
- 高分析性能(低不精密度)或多次QC重复可控制假拒绝率。
- 对基于模式的检测,特定分类器的算法细节决定关键分析物和QC设计所需严格度。
临床怎么用
- 对多重检测可选用高分析性能或增加QC重复次数来控制假拒绝率。
- 对基于模式的分类检测,需根据分类器算法确定关键分析物并据此设计QC严格度。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Multiplexed assays, which simultaneously measure many analytes from a single sample, have become increasingly significant for laboratory diagnosis. Many multiplexed assays with application to clinical diagnosis consist of analyte measurements that can fail individually. In these cases, traditional statistical quantitative quality control (QC) measures cannot be used without creating an unacceptably high false rejection rate. METHODS: We developed stochastic simulation software (qcsim) to calculate and visualize the detection power of complex QC rule combinations, including traditional Westgard rules as well as statistical tests of multiple QC repeats, with arbitrary degrees of multiplexing and levels of control. We used this approach to evaluate novel QC models that maintain stringent control of the bias and imprecision of each analyte in a highly multiplexed assay ("panel"). For classifier-based assays that use an algorithm to generate a small number of diagnostic outcomes from a large number of analytes (a "pattern"), we use perturbation analysis to assess the effect of different classifiers with a single analytical platform. RESULTS: Multiple QC approaches are able to overcome the challenge of highly multiplexed assays, and we demonstrate successful strategies that control the false rejection rate using either high analytical performance (low imprecision) or multiple QC replicates. We also demonstrate that, for pattern-based assays, algorithmic details of the specific classifier determine both critical analytes and the required stringency of the QC design. CONCLUSIONS: These results demonstrate multiple QC strategies that control highly multiplexed assays (1000-plex) at a level that is comparable to traditional QC schemes for single-analyte assays.
引用
- Unsihuay D, Master SR. Extending Quality Control Procedures for Multiplexed Clinical Assays. Clin Chem. 2026. PMID: 42626814. doi:10.1093/clinchem/hvag100
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。