文献速递临床生化质量管理与危急值

EWMA与CUSUM算法在电解质患者实时质量控制中的性能评估

Assessing the performance of EWMA and CUSUM algorithms in patient-based real-time quality control of electrolytes.
PubMed 文献 · Clin Chem Lab Med · 2026-03-20

结果显示钠、钾、钙的两种算法灵敏度均达100%(ANPed 2-15);氯、镁、磷中EWMA灵敏度低(3.3-23.3%),CUSUM灵敏度高(96.7-100%)但检测延迟较长(37-86个患者结果);ANPed优化可加速检测但降低特异性。结论提示基于分析物的PBRTQC策略可增强实时质量保证。

要点

  • 钠、钾、钙的EWMA与CUSUM灵敏度均达100%,ANPed为2-15。
  • 氯、镁、磷中CUSUM灵敏度96.7-100%,但延迟37-86个患者结果。
  • ANPed优化加速检测但降低特异性,磷的特异性从100%降至66.7%。

核心结论

  • CUSUM作为累积PBRTQC可快速准确检测电解质分析误差,优化EWMA在某些项目中有额外获益。
  • 基于分析物的PBRTQC策略可增强实时质量保证并提高临床决策安全性。

研究设计与样本

  • 对每个分析物分布应用EWMA和CUSUM算法,使用QC Constellation软件进行统计分析。
  • 比较各方法的灵敏度、误差检出率和假警报频率。

主要发现

  • 钠、钾、钙的EWMA和CUSUM均达100%灵敏度,ANPed为2-15。
  • 氯、镁、磷的EWMA灵敏度低(3.3-23.3%),CUSUM灵敏度高(96.7-100%)但检测延迟37-86个患者结果。
  • ANPed优化加速所有分析物检测,但降低特异性,磷从100%降至66.7%。

关键数值与推荐

  • 钠、钾、钙:EWMA和CUSUM灵敏度100%,ANPed 2-15。
  • 氯、镁、磷:EWMA灵敏度3.3-23.3%;CUSUM灵敏度96.7-100%,延迟37-86个患者结果。
  • ANPed优化后磷特异性从100%降至66.7%。

临床怎么用

  • 电解质PBRTQC可选用CUSUM以获得高灵敏度,但需关注检测延迟。
  • 对氯、镁、磷等EWMA灵敏度低的项目,可考虑CUSUM或优化EWMA策略。
  • ANPed优化需权衡检测速度与特异性,尤其对磷应谨慎。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Patient-based real-time quality control (PBRTQC) represents a useful complement to traditional internal quality control methods, particularly in the continuous monitoring of routine analyses. Sodium, potassium, chloride, calcium, phosphorus, and magnesium are critical for patient safety. This study aimed to evaluate the performance of the exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) algorithms in patient-based quality control of electrolytes in clinical biochemistry. METHODS: A total of 6.000 consecutive patient results obtained over 30 days using the Roche Cobas platform were analysed. EWMA and CUSUM algorithms were applied to the individual analytical distributions. The performance of each method was compared in terms of sensitivity, error detection rate, and false alarm frequency. Statistical analyses were performed using QC Constellation software. RESULTS: For Na, K, and Ca, both EWMA and CUSUM achieved 100 % sensitivity with ANPed values of 2-15. EWMA performance for Cl, Mg, and P was low (sensitivity 3.3-23.3 %), while CUSUM demonstrated high sensitivity (96.7-100 %) but longer detection delays (37-86 patient results). Minimum-Average Number of Patient results affected until error detection (ANPed) optimisation accelerated detection for all analytes but reduced specificity, particularly for P (from 100 % to 66.7 %). CONCLUSIONS: CUSUM a patient outcome monitoring approach based on as a cumulative PBRTQC, enabled rapid and accurate detection of analytical errors in electrolyte analyses. While CUSUM offers high sensitivity and specificity in most parameters, the optimised EWMA has provided additional benefits in some tests. The findings suggest that analyte-specific PBRTQC strategies can enhance real-time quality assurance and thereby improve clinical decision safety.

来源:Clin Chem Lab Med,查看原文。版权归原作者所有。

引用

  1. Doğan Ö, Çubukçu HC. Assessing the performance of EWMA and CUSUM algorithms in patient-based real-time quality control of electrolytes. Clin Chem Lab Med. 2026. PMID: 41855179. doi:10.1515/cclm-2026-0049

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。