文献速递质量管理与危急值临床生化

R值统计量在偶数检查法实时质控中有效检测偏倚与变异

Effective detection of bias and variability using R-value statistics in the even-check method for real-time quality control.
PubMed 文献 · Clin Chim Acta · 2025-11-19

该研究在Tenri医院收集20个检验项目在设备更换前后的临床数据,实时计算R值、R评分及其均值与标准差,并与每日内部质控(iQC)的SD和变异系数比较。结果显示设备更换后分析稳定性改善,R值与iQC的SD和变异系数均下降;钠测定中偶数检查法(ECM)比常规iQC更早、更敏感地检出+3 mmol/L偏倚,监测R值均值与SD可检测急性和渐进性系统误差。

要点

  • ECM将Δ值转为正负号,通过R值检测系统误差。
  • 监测R值均值与SD可提高系统误差检测敏感性。
  • 钠测定中ECM比常规iQC更早检出+3 mmol/L偏倚。

核心结论

  • 将R值的均值与SD纳入ECM可增强PBRTQC对系统误差的检测,支持及时纠正措施和常规监测,提升实验室可靠性并促进患者安全。

研究设计与样本

  • 在Tenri医院收集20个不同检验项目在分析设备更换前后的临床数据,实时计算R值、R评分及R值均值与SD,每日测定iQC样本并比较设备更换前后的SD和变异系数。

主要发现

  • 设备更换后分析稳定性改善,iQC和R值的SD及变异系数均下降。
  • 钠测定中ECM比常规iQC更早、更敏感地检出+3 mmol/L偏倚,便于通过更换电极及时纠正。
  • 监测R值均值与SD可检测急性和渐进性系统误差,支持多项目实时评估分析性能与维护时机。

关键数值与推荐

  • 钠测定中ECM检出+3 mmol/L偏倚早于且敏感于常规iQC。

临床怎么用

  • 在常规检验中整合ECM并监测R值均值与SD,可实时评估分析性能、辅助判断维护时机并提升系统误差检出能力。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Patient-based real-time quality control (PBRTQC) is expected to enhance patient safety by improving accuracy of clinical testing, but its adoption remains limited. The Even Check Method (ECM) converts Δ values into simple positive or negative signs, enabling detection of systematic errors through R-values. The potential benefits of incorporating mean and standard deviation (SD) of R-values as auxiliary indicators for more sensitive monitoring have not been fully explored. METHODS: Clinical data for 20 different laboratory test items were collected at Tenri Hospital before and after analytical equipment replacement. The R-values, R-scores, and the mean and SD of R-values were calculated in real time using patients' historical data. Internal quality control (iQC) samples were measured daily, and SDs and coefficients of variation were compared before and after equipment replacement. RESULTS: Analytical stability improved after equipment replacement, with decreased SDs and coefficients of variation in both iQC and R-values. In sodium measurements, ECM detected a + 3 mmol/L bias earlier and more sensitively than conventional iQC, enabling prompt corrective action via electrode replacement. Monitoring mean and SD of R-values allowed detection of both acute and gradual systematic errors and supported real-time evaluation of analytical performance and maintenance timing across multiple test items. This approach also facilitates interpretation by laboratory staff and practical integration into routine testing. CONCLUSION: Incorporating the mean and SD of R-values into ECM enhances PBRTQC by improving systematic error detection, supporting timely corrective actions, and enabling routine monitoring, thereby strengthening laboratory reliability and contributing to patient safety.

来源:Clin Chim Acta,查看原文。版权归原作者所有。

引用

  1. Hatanaka N, Yamamoto Y, Kuramura E, et al. Effective detection of bias and variability using R-value statistics in the even-check method for real-time quality control. Clin Chim Acta. 2025. PMID: 41265510. doi:10.1016/j.cca.2025.120732

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。