文献速递临床生化质量管理与危急值

百万次基础代谢panel检测的固体废物估算:美国多中心研究

Estimated waste generation from 1 million basic metabolic panels: a multisite U.S. study.
PubMed 文献 · Clin Chem Lab Med · 2025-10-07

该研究在五家学术医学中心基于2022年采购数据,估算各使用不同化学分析仪系统完成一百万次基础代谢panel(BMP)产生的固体废物及水电相关CO2排放。湿化学平台(Abbott、Beckman、Roche、Siemens)分别产生995 kg、1,274 kg、579 kg、489 kg固体废物,干化学Ortho系统产生160,593 kg;所有平台废物以塑料为主;电力与水使用年化CO2e总计69,665 kg CO2e。作者强调诊断实验室需制定可持续性策略以降低环境足迹。

要点

  • 湿化学平台每百万次BMP固体废物为489–1,274 kg,干化学Ortho系统为160,593 kg。
  • 所有平台固体废物以塑料为主。
  • 电力与水使用年化CO2e总计69,665 kg CO2e。

核心结论

  • 在主要诊断平台上完成BMP检测会产生大量固体废物和CO2e,诊断实验室亟需可持续性策略以应对环境足迹。

研究设计与样本

  • 五家学术医学中心各使用一种不同临床化学分析仪系统,收集2022年1月至2022年12月的年度供应商采购数据。
  • 对试剂卡盒、包装盒、试剂相关插页、校准品和质控材料等耗材分类并分别称重,基于机构检测量估算一百万次BMP的固体废物。
  • 获取分析仪系统的水和电力使用量,使用标准排放因子和计算器估算CO2排放(CO2e)。

主要发现

  • 湿化学分析仪平台Abbott、Beckman、Roche和Siemens完成一百万次BMP分别产生995 kg、1,274 kg、579 kg和489 kg固体废物。
  • 干化学Ortho系统完成一百万次BMP产生160,593 kg固体废物。
  • 所有平台的大部分废物为塑料。
  • 电力与水使用的年化CO2e总计为69,665 kg CO2e。

临床怎么用

  • 检验科在选择或评估高通量化学分析仪时,可将固体废物产生量和CO2e纳入环境影响的考量。
  • 针对以塑料为主的废物构成,可优先探索塑料耗材减量与回收策略。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Clinical laboratory operations consume large amounts of electricity and water and generate considerable quantities of solid waste. In this study, we quantified and compared the estimated solid waste produced from performing one million basic metabolic panels (BMPs) across five major high-throughput chemistry analyzer systems commonly used in the United States. Additionally, we estimated the carbon emissions associated with the electricity and water usage of each analyzer to better understand their environmental impact. METHODS: Five academic medical centers each using a different clinical chemistry analyzer system, collected their respective annual vendor purchase data (January 2022-December 2022). Consumables including reagent cartridges, packaging boxes, inserts associated with reagents, calibrators, and QC materials were categorized and weighed separately. Solid waste estimates for one million BMPs were calculated based on institutional testing volumes. Water and electricity usage for the analyzer systems was obtained and estimated CO2 emissions (CO2e) were determined using standard emission factors and calculators. RESULTS: The study found that performing one million BMPs on wet chemistry analyzer platforms, Abbott, Beckman, Roche and Siemens generated 995 kg, 1,274 kg, 579 kg and 489 kg of solid waste respectively while the dry chemistry Ortho system produced 160,593 kg. The majority of waste across all platforms was plastic. Annualized CO2e from electricity and water use totaled to 69,665 kg CO2e. CONCLUSIONS: Analysis of BMPs generates substantial amounts of solid waste and CO2e across major diagnostic platforms. These findings emphasize the urgent need for sustainability strategies in diagnostic laboratories to address their environmental footprint.

来源:Clin Chem Lab Med,查看原文。版权归原作者所有。

引用

  1. Khattri Bhandari S, Twum K, Laryea ET, et al. Estimated waste generation from 1 million basic metabolic panels: a multisite U.S. study. Clin Chem Lab Med. 2025. PMID: 41048040. doi:10.1515/cclm-2025-1162

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。