Sigma度量的误解与局限
本文探讨Sigma度量(SM)在临床化学中的应用,指出SM并非检测稳定性的有效指标,高SM检测更易通过QC规则检出误差,但无证据表明精密度与故障率相关,经典六西格玛统计与常规TEa六西格玛不同。
要点
- SM不能有效衡量检测稳定性或失败可能性。
- 高SM检测的相同QC规则检出误差能力更强,更易预防错误。
- 无证据表明检测精密度与其故障率相关。
核心结论
- SM不是检测稳定性或失败可能性的有效度量。
- 经典六西格玛与临床化学中广泛实践的TEa六西格玛不同。
主要发现
- 高SM检测发生失控事件时,相同QC规则检出误差的能力强于低SM检测。
- 实验室可能拥有频繁故障的高精密度仪器和几乎不故障的低精密度仪器。
- 无证据表明检测精密度与其故障率相关。
- Schmidt等系列论文显示,Pf或偏移概率更高的检测预期不可接受结果数更高。
关键数值与推荐
- Parvin患者风险模型假设采用括号连续模式(BCM)检测流程。
- 将Pf纳入QC设计过程面临重大挑战,尽管有主动质量控制(PQC)方法。
临床怎么用
- 低SM检测宜采用更频繁QC事件和更多QC样本,或增加QC成本。
- 设计QC方案时需考虑BCM工作流程,避免误以为高SM检测可减少QC频率以节约成本。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This paper further explores the Sigma Metric (SM) and its application in clinical chemistry. It discusses the SM, assay stability, and control failure relationship. CONTENT: : SM is not a valid measure of assay stability or the likelihood of failure. When an out-of-control event occurs for an assay with a higher SM value, the same QC rule will have greater power to detect error than assays with a lower SM value. Thus, it is easier to prevent errors from happening for higher SM assays. This rationale encourages using more frequent QC events and more QC samples for a QC scheme of a low SM assay or simply more QC cost for low SM assays. A laboratory can have a high-precision instrument that frequently fails and a low-precision instrument that hardly ever fails. Parvin's patient risk model presumes the bracketed continuous mode (BCM) testing workflow. If overlooked when designing QC schemes, this leads to the common misconception of the SM that one can save the cost of QC since assays with high SM require less frequent QC to ensure patient risk. There is no evidence that an assay's precision is correlated with its failure rate. Schmidt et al., in a series of papers, showed that an assay with a higher Pf or shift in probability will have a higher expected number of unacceptable results. Incorporating Pf into the QC design process presents significant challenges despite the proactive quality control (PQC) methodology. SUMMARY: Unfortunately, TEa Six Sigma, as widely practiced in Clinical Chemistry, is not based on classical Six Sigma mathematical statistics. Classical Six Sigma would facilitate comparing results across activities where the principles of Six Sigma are employed.
引用
- Duan X, Theodorsson E, Guo W, et al. Sigma Metrics misconceptions and limitations. Clin Chem Lab Med. 2024. PMID: 39711229. doi:10.1515/cclm-2024-1380
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。