文献速递疝与腹壁外科

腹腔镜腹壁疝修补术不同补片固定装置的力学强度比较:人体标本实验研究

Comparison of mesh fixation devices for laparoscopic ventral hernia repair: an experimental study on human anatomic specimens.
PubMed 文献 · Surg Endosc · 2018-01-16

该研究利用16具近期遗体标本(平均BMI 24.4 kg/m2),测试11种腹腔镜腹壁疝修补补片固定装置的即刻抗张强度,每种装置测试44次。结果显示非可弯曲钉枪抗张强度高于可弯曲钉枪,长度≥6 mm的可吸收钉优于<6 mm者,经筋膜缝线优于5.1 mm可吸收钉和氰基丙烯酸酯胶,且BMI>30 kg/m2的肥胖标本固定强度显著下降。

要点

  • 非可弯曲钉枪抗张强度优于可弯曲钉枪。
  • 长度≥6 mm的可吸收钉固定强度优于<6 mm者。
  • 经筋膜缝线固定强度优于5.1 mm可吸收钉和氰基丙烯酸酯胶。

核心结论

  • 经筋膜缝线和较长长度的钉可提供更好的即刻固定抗张强度。
  • 可弯曲钉枪虽改善可及性,但人体工学不佳可能限制力量传导。

研究设计与样本

  • 实验研究,使用16具近期遗体标本(平均BMI 24.4 kg/m2),测试11种腹腔镜腹壁疝修补补片固定装置的即刻抗张强度(牛顿),每种装置测试44次。

主要发现

  • 非可弯曲钉枪抗张强度高于可弯曲钉枪:5.1-mm ReliaTack™ 16.9 ± 8.7 N vs. 12.2 ± 5.6 N,p=0.013;7-mm ReliaTack™ 19.8 ± 9.4 N vs. 15.0 ± 7.0 N,p=0.007。
  • 长度≥6 mm的可吸收钉(7-mm ReliaTack™、6-mm SorbaFix™、7.2-mm SecureStrap™)抗张强度显著高于<6 mm者(5.1-mm ReliaTack™、5.1-mm AbsorbaTack™),p<0.001。
  • 经筋膜缝线(PDS 2-0)26.3 ± 5.6 N优于5.1-mm AbsorbaTack™ 13.6 ± 7.3 N和LiquiBand FIX8™ 3.5 ± 2.4 N(p<0.001)。
  • BMI>30 kg/m2的肥胖标本固定强度显著下降:13.8 ± 8.0 vs. 17.9 ± 9.7 N,p=0.044。

临床怎么用

  • 腹腔镜腹壁疝修补补片固定可优先考虑经筋膜缝线和长度≥6 mm的钉。
  • 肥胖患者固定强度可能下降,需注意固定方式选择。

局限性

  • 研究为人体标本实验,结果反映即刻抗张强度,未涉及活体长期愈合。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: As there is a lack of clarity in terms of the tensile strength of mesh fixation for laparoscopic ventral hernia repair (LVHR), our aim was to investigate the immediate tensile strength of currently available mesh fixation devices on human anatomic specimens. METHODS: Sixteen recently deceased body donators (mean body mass index of 24.4 kg/m2) were used to test the immediate tensile strength (Newton) of 11 different LVHR mesh fixation devices. RESULTS: Each of the 11 different laparoscopic fixation devices was tested 44 times. Non-articulating tackers provided higher fixation resistance to tensile stress in comparison to articulating tackers (5.1-mm ReliaTack™: 16.9 ± 8.7 N vs. 12.2 ± 5.6 N, p = 0.013; 7-mm ReliaTack™: 19.8 ± 9.4 N vs. 15.0 ± 7.0 N, p = 0.007). Absorbable tacks with a greater length, i.e. ≥6 mm (7-mm ReliaTack™, 6-mm SorbaFix™ and 7.2-mm SecureStrap™) had significantly higher fixation tensile strength than tacks with a shorter length, i.e. < 6 mm (5.1-mm ReliaTack™ and 5.1-mm AbsorbaTack™) (p < 0.001). Furthermore, transfascial sutures (PDS 2-0 sutures 26.3 ± 5.6 N) provided superior fixation tensile strength than 5.1-mm AbsorbaTack™ (13.6 ± 7.3 N) and cyanoacrylate glues such as LiquiBand FIX8™ (3.5 ± 2.4 N) (p < 0.001, respectively). There was a significant deterioration in fixation capacity in obese body donators with a body mass index > 30 kg/m2 (13.8 ± 8.0 vs. 17.9 ± 9.7 N, p = 0.044). CONCLUSIONS: Although articulating laparoscopic tackers improve accessibility and facilitate the utilization of tacks within the fixation weak spot adjacent to the trocar placement, an articulating shaft that is not ergonomic to use may limit mechanisms of force transmission. For mesh fixation in LVHR, transfascial sutures and tacks with a longer length provide better immediate fixation tensile strength results.

来源:Surg Endosc,查看原文。版权归原作者所有。

引用

  1. Chan YW, Sow Z, Lukic D, et al. Comparison of mesh fixation devices for laparoscopic ventral hernia repair: an experimental study on human anatomic specimens. Surg Endosc. 2018. PMID: 29340814. doi:10.1007/s00464-018-6031-5

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。