猪疝模型中补片力学的在体与离体联合分析
本研究在七只小型猪腹壁疝模型中植入两种重量级聚丙烯补片,通过透视追踪标记珠在5至30 mmHg注气压力下评估在体拉伸,并于术后28天行离体力学测试。结果显示补片植入区随时间收缩(补片A 17.65%,补片B 0.12%,p=0.06),修复后腹壁力学更趋向补片特性,提示力学匹配更佳的补片可能减少腹壁力学改变。
要点
- 在体透视标记珠法可追踪补片层面三维拉伸,发现注气增压时补片扩张但植入区收缩。
- 离体测试显示修复后腹壁组织比原生组织更硬,且力学特性逐渐被补片主导。
- 补片A偏离原生组织各向异性程度大于补片B,提示补片力学匹配影响修复效果。
核心结论
- 该技术在猪模型中实现了补片层面在体三维拉伸评估,补片植入区收缩提示补片边缘可能存在应力。
- 离体力学表明修复组织采纳补片特性,力学匹配更好的补片可能减少腹壁力学改变。
研究设计与样本
- 七只小型猪行腹壁疝造模后开放修补,植入两种重量级聚丙烯补片之一,补片附不透射线标记珠。
- 术后第0、7、28天在5至30 mmHg注气压力下行透视成像,第28天处死后取全层样本行离体力学测试。
- 另对13只小型猪对照及补片单独进行测试,评估刚度与各向异性(横向与头尾方向刚度比)。
主要发现
- 三维重建显示修复腹壁拉伸模式,随压力升高两种补片均扩张且组间无差异。
- 随时间推移补片收缩:补片A收缩17.65%,补片B收缩0.12%(p=0.06)。
- 补片A偏离各向异性原生组织程度大于补片B;与原生组织相比,补片A在横向和头尾方向均更硬。
- 两种处理组取出的修复腹壁均比原生组织更硬,修复组织随时间各向异性降低,补片特性占据主导。
临床怎么用
- 提示临床选择补片时应关注其与原生腹壁的力学匹配性,力学匹配更佳可能减少修复后腹壁力学改变。
局限性
- 样本量较小(七只小型猪),补片收缩组间比较p=0.06未达统计学显著。
- 动物模型结果外推到人体需谨慎。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Hernia meshes exhibit variability in mechanical properties, and their mechanical match to tissue has not been comprehensively studied. We used an innovative imaging model of in vivo strain tracking and ex vivo mechanical analysis to assess effects of mesh properties on repaired abdominal walls in a porcine model. We hypothesized that meshes with dissimilar mechanical properties compared to native tissue would alter abdominal wall mechanics more than better-matched meshes. METHODS: Seven mini-pigs underwent ventral hernia creation and subsequent open repair with one of two heavyweight polypropylene meshes. Following mesh implantation with attached radio-opaque beads, fluoroscopic images were taken at insufflation pressures from 5 to 30 mmHg on postoperative days 0, 7, and 28. At 28 days, animals were euthanized and ex vivo mechanical testing performed on full-thickness samples across repaired abdominal walls. Testing was conducted on 13 mini-pig controls, and on meshes separately. Stiffness and anisotropy (the ratio of stiffness in the transverse versus craniocaudal directions) were assessed. RESULTS: 3D reconstructions of repaired abdominal walls showed stretch patterns. As pressure increased, both meshes expanded, with no differences between groups. Over time, meshes contracted 17.65% (Mesh A) and 0.12% (Mesh B; p = 0.06). Mesh mechanics showed that Mesh A deviated from anisotropic native tissue more than Mesh B. Compared to native tissue, Mesh A was stiffer both transversely and craniocaudally. Explanted repaired abdominal walls of both treatment groups were stiffer than native tissue. Repaired tissue became less anisotropic over time, as mesh properties prevailed over native abdominal wall properties. CONCLUSIONS: This technique assessed 3D stretch at the mesh level in vivo in a porcine model. While the abdominal wall expanded, mesh-ingrown areas contracted, potentially indicating stresses at mesh edges. Ex vivo mechanics demonstrate that repaired tissue adopts mesh properties, suggesting that a better-matched mesh could reduce changes to abdominal wall mechanics.
引用
- Kahan LG, Lake SP, McAllister JM, et al. Combined in vivo and ex vivo analysis of mesh mechanics in a porcine hernia model. Surg Endosc. 2017. PMID: 28733734. doi:10.1007/s00464-017-5749-9
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。