腹腔镜腹侧网片直肠固定术模拟训练模块的开发与验证
本研究开发并验证了一种用于腹腔镜腹侧网片直肠固定术(LVMR)的合成盆腔模拟模型,该模型整合3D打印骨骼与铂固化硅胶。专家OSATS和SRS得分显著高于非专家,手术流程和打结步骤优势明显,但总手术时间差异无统计学意义。
要点
- 合成盆腔模型具有结构功能保真度,可用于LVMR技能训练。
- 专家在OSATS和SRS评分上显著优于非专家,支持构建效度。
- 模型在手术流程和打结步骤上能区分专家与非专家。
核心结论
- 该经验证的模型为高级腹腔镜盆腔手术培训提供了有力的教育价值。
研究设计与样本
- 通过迭代原型开发合成盆腔模型,整合3D打印骨骼和铂固化硅胶。
- 通过模拟LVMR中的表现评估构建效度,使用改良OSATS和手术特定评分量表(SRS)。
主要发现
- 专家OSATS评分中位数20.5(20.38-21)显著高于非专家16(14.75-17.25),p=0.01。
- 专家SRS评分中位数16.25(16-16.88)显著高于非专家13.5(13.25-15),p=0.009。
- 手术流程步骤专家优势显著(p=0.025),打结步骤亦显著(p=0.018)。
- 总手术时间专家29.3分钟 vs 非专家52.8分钟,差异无统计学意义(p=0.073)。
- 多数参与者认为模型真实、有用且能代表实际手术条件。
临床怎么用
- 该模型可用于腹腔镜盆腔手术的模拟训练和结构化技能获取。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Laparoscopic pelvic surgery presents significant technical challenges due to anatomical constraints such as limited working space and proximity to neurovascular structures. Laparoscopic ventral mesh rectopexy (LVMR) was selected as the procedural framework for model design and validation, given its complexity and relevance as a representative pelvic procedure. This study aimed to develop and validate a synthetic and reproducible simulation model with structural and functional fidelity to support the acquisition of laparoscopic skills in anatomically restricted pelvic environments. METHODS: A synthetic pelvic model was developed through iterative prototyping, integrating 3D-printed bone structures and platinum-cured silicone. Face validity and user reaction were initially assessed by eleven surgeons with varying expertise. Construct validity was then evaluated through performance in a simulated LVMR, using modified Objective Structured Assessment of Technical Skills (OSATS) and a Procedure-Specific Rating Scale (SRS). Surgical time was recorded by procedural steps. Data were analyzed using non-parametric methods. RESULTS: Experts achieved significantly higher OSATS scores (median 20.5 [20.38-21]) than non-experts (16 [14.75-17.25]; p = 0.01), and higher SRS scores (16.25 [16-16.88] vs. 13.5 [13.25-15]; p = 0.009). Step-specific advantages were observed in surgical flow (p = 0.025) and knot tying (p = 0.018). Although global operative time was shorter in experts (29.3 vs. 52.8 min), it was not statistically significant (p = 0.073). Most participants described the model as realistic, useful, and representative of actual surgical conditions. CONCLUSION: This validated, reusable model provides strong educational value for advanced laparoscopic pelvic training and structured skill acquisition.
引用
- Zuñiga H, Jarry C, Salas R, et al. Development of a simulation-based laparoscopic ventral rectopexy module: skills training for minimally invasive pelvic surgery. Surg Endosc. 2025. PMID: 41261247. doi:10.1007/s00464-025-12371-3
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。