文献速递鼻科小儿耳鼻咽喉

3D打印高保真鼻出血模拟器用于培训与评估

To Pack a Nose: High-Fidelity Epistaxis Simulation Using 3D Printing Technology.
PubMed 文献 · Laryngoscope · 2021-07-17

本研究利用去标识患者CT扫描设计3D打印鼻出血模拟器,通过导管循环人工血液模拟三个出血点,由22名耳鼻咽喉科教师和10名学员分阶段评估。结果显示教师对模拟器培训价值、实践相关性和体验真实感评分均为4.0/4,学员推荐意愿4.0/4,管理鼻出血信心从1.0/4提升至3.0/4(P=.03)。

要点

  • 3D打印鼻出血模拟器在解剖真实性和培训价值上获专家高评分(4.0/4)。
  • 学员使用模拟器后管理鼻出血信心从1.0/4显著提升至3.0/4(P=.03)。
  • 模拟器可模拟蝶腭、Kiesselbach丛和筛前三个出血部位。

核心结论

  • 3D打印鼻出血模拟器具有成本效益、解剖真实、符合学员教育需求,可作为培训工具。

研究设计与样本

  • 准实验干预研究,纳入22名耳鼻咽喉科教师和10名学员,分三阶段独立评估模拟器。

主要发现

  • 教师对培训价值、实践相关性和体验真实感的中位评分均为4.0/4。
  • 学员对临床培训价值评分4.0/4,推荐未来学员使用的可能性评分4.0/4。
  • 学员管理鼻出血信心从使用前1.0/4提升至使用后3.0/4,差异有统计学意义(P=.03)。

关键数值与推荐

  • 模拟器基于去标识患者CT扫描3D打印,人工血液经导管循环模拟蝶腭、Kiesselbach丛和筛前出血。
  • 评估涵盖四个域:物理与解剖属性、体验真实感、执行任务能力、价值与临床相关性。

临床怎么用

  • 可用于耳鼻咽喉科住院医师或学员的鼻出血管理技能培训与评估。

局限性

  • 研究为定性研究,样本量较小(22名教师和10名学员),证据等级为3级。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Initial management and stabilization of epistaxis is managed by a diverse offset of clinical providers with variable levels of training. OBJECTIVE: To determine the anatomic and clinical fidelity and ease of use of a novel simulator for the training and assessment of epistaxis management skills. STUDY DESIGN: Qualitative Research Study using expert questionnaire's for validation of a newly developed simulator. METHODS: We performed a quasi-experimental intervention with 22 otolaryngology faculty and 10 trainees who independently evaluated the simulator. Data were collected in three phases: phase 1 (preliminary evaluation), phase 2 (final expert evaluation), and phase 3 (trainee evaluation). We designed a three-dimensional (3D) printed model from a de-identified patient computed tomography scan. Artificial blood was circulated through catheters to simulate bleeding from three distinct sites (sphenopalatine, Kiesselbach's plexus, and anterior ethmoid). Four domains were assessed: "Physical and anatomic attributes," "Realism of experience," "Ability to perform tasks," and "Value and clinical relevance." Internal structure and validity were measured with Cronbach's alpha and item outfit mean-square statistics. RESULTS: Results from otolaryngology faculty showed very high median ratings for "Value of the simulator as a training tool" (4.0/4) and high ratings for "Relevance to practice" (4.0/4), and realism of experience (4.0/4). Responses from otolaryngology trainees demonstrated high value for clinical training (4.0/4) and high likelihood to recommend use for future trainees (4.0/4). Confidence in managing epistaxis before (1.0/4) and after (3.0/4) simulator use was statistically improved (P = .03). CONCLUSIONS: Using 3D printing technology, we created a novel simulator for epistaxis management. Preliminary evidence suggests the model is cost-effective, anatomically realistic, relevant to trainees' educational needs, and valuable as a training tool. LEVEL OF EVIDENCE: 3 Laryngoscope, 132:747-753, 2022.

来源:Laryngoscope,查看原文。版权归原作者所有。

引用

  1. Gao RW, Rooney D, Harvey R, et al. To Pack a Nose: High-Fidelity Epistaxis Simulation Using 3D Printing Technology. Laryngoscope. 2021. PMID: 34272874. doi:10.1002/lary.29757

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。