文献速递鼻科

基于计算流体力学刻画挤压瓶鼻腔冲洗的流场特征

Characterization of nasal irrigation flow from a squeeze bottle using computational fluid dynamics.
PubMed 文献 · Int Forum Allergy Rhinol · 2019-11-06

研究基于一名25岁健康未手术患者的高分辨率鼻窦CT构建鼻腔几何模型,用计算流体力学模拟锥形喷嘴挤压瓶在头前倾45度、2秒、35 mL/秒条件下的鼻腔冲洗。结果显示鼻腔几乎完全覆盖,同侧上颌窦覆盖约40%、前筛窦约30%,蝶窦与额窦覆盖可忽略;上颌窦与筛窦的进入主要靠溢流而非直接喷射。

要点

  • 鼻腔冲洗几乎完全覆盖鼻腔表面,但鼻窦覆盖有限。
  • 同侧上颌窦与前筛窦覆盖分别约40%与30%,蝶窦和额窦可忽略。
  • 鼻窦渗透主要靠溢流而非直接喷射,支持大容量冲洗淹没窦口。

核心结论

  • 挤压瓶鼻腔冲洗可几乎完全覆盖鼻腔,但同侧上颌窦与前筛窦覆盖分别约40%与30%,蝶窦和额窦覆盖可忽略。
  • 上颌窦与筛窦的液体进入主要源于溢流而非直接喷射,支持推荐较大冲洗容量以淹没窦口。

研究设计与样本

  • 基于一名25岁健康、未手术患者的高分辨率鼻窦CT构建鼻腔几何模型并进行计算流体力学分析。
  • 模拟条件为锥形喷嘴挤压瓶、头前倾45度、2秒喷射、流速35 mL/秒。

主要发现

  • 模型可精确给出流速、压力、壁面剪切应力及特定位置与时间的表面覆盖和停留时间。
  • 鼻腔几乎完全覆盖,同侧上颌窦覆盖约40%,前筛窦约30%。
  • 蝶窦与额窦覆盖可忽略。
  • 上颌窦与筛窦的渗透主要由于溢流而非直接喷射进入。

关键数值与推荐

  • 同侧上颌窦冲洗覆盖约40%。
  • 同侧前筛窦冲洗覆盖约30%。
  • 模拟参数为头前倾45度、2秒喷射、35 mL/秒。

临床怎么用

  • 临床可参考大容量冲洗以淹没窦口、促进上颌窦与前筛窦覆盖。
  • 对蝶窦与额窦的冲洗覆盖预期应保守,不宜依赖挤压瓶冲洗直接到达。

局限性

  • 模型基于单一健康未手术患者的CT几何,未涵盖术后或解剖变异人群。
  • 原文指出既往实验模型不足,本模拟结果的外推需谨慎。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Nasal saline irrigation has become standard of care in various sinonasal conditions, including allergic and nonallergic rhinitis, chronic rhinosinusitis, and in the postoperative patient. Evidence regarding the mechanisms and dynamics of liquid flow through the sinonasal cavity remains limited due to inadequate experimental models (cadaveric, 3-dimensional [3D] printed, imaging of labeled dyes and radioisotopes). We aimed to develop a computational fluid dynamics (CFD) model of nasal irrigation to demonstrate sinonasal surface coverage, residence times across the mucosal surfaces, and shearing force of irrigation. METHODS: A nasal cavity geometry derived from high-resolution paranasal sinus computed tomography (CT) scans of a healthy, unoperated, 25-year-old patient was created. CFD analysis was performed to assess the distribution of nasal irrigation from a tapered nozzle bottle at a forward head-tilt position of 45 degrees with a 2-second burst at 35 mL/second. RESULTS: The model demonstrates nasal irrigation from ipsilateral to contralateral with precise measures of velocity, pressure, wall shear stress, and mapping of surface coverage and residence times at specific locations and times. The nasal cavity experiences almost complete coverage of irrigation, while overflow from the nasal cavity facilitates moderate coverage of the ipsilateral maxillary (40%) and anterior ethmoid sinuses (30%). Negligible coverage of the sphenoid and frontal sinuses was noted. CONCLUSION: Detailed physical mechanisms of liquid irrigation injected from a commonly used squeeze bottle were shown. Ipsilateral maxillary and ethmoid sinus penetration are primarily due to overflow rather than direct jet entry, confirming the recommendation of larger volumes of irrigation to "flood" the sinus ostia.

来源:Int Forum Allergy Rhinol,查看原文。版权归原作者所有。

引用

  1. Inthavong K, Shang Y, Wong E, et al. Characterization of nasal irrigation flow from a squeeze bottle using computational fluid dynamics. Int Forum Allergy Rhinol. 2019. PMID: 31691535. doi:10.1002/alr.22476

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。