文献速递头颈外科咽喉与嗓音

利用计算机断层扫描数据生成可重复、解剖学精确的半喉模型

Computed Tomography Data to Generate a Reproducible, Anatomically Accurate Hemilaryngeal Model.
PubMed 文献 · Otolaryngol Head Neck Surg · 2019-04-23

本研究对10例健康对照和10例喉癌患者的CT扫描进行三维建模,构建声带内移的半喉模型,并与CT数据比较。对照组建模数据与CT数据高度匹配且无统计学差异;声门下前后径与声带长度显著相关(r²=0.78,P=.0008);喉癌患者建模数据与对照无统计学差异,表明基于CT的三维建模可行且可重复。

要点

  • 基于CT的三维建模可生成可重复、解剖学精确的半喉模型,声带可内移。
  • 声门下前后径与声带长度显著相关(r²=0.78,P=.0008),或可用于推断声带真实尺寸。
  • 喉癌患者的建模数据与健康对照无统计学差异,建模在喉癌病例中同样可行。

核心结论

  • 基于CT扫描的喉与声带三维建模是可行且可重复的,结果与既往文献报道高度一致,并可在喉癌病例中复制。

研究设计与样本

  • 三维建模研究,对10例健康对照和10例喉癌患者的CT扫描进行分割并导入三维建模软件,矢状切开会厌构建半喉模型并将声带内移。
  • 研究设置:三级学术转诊中心和再生医学实验室。

主要发现

  • 所有对照组建模数据与CT数据高度匹配,两者间无统计学差异。
  • 声门下前后径与声带长度显著相关(r²=0.78,P=.0008),在发生破坏的病例中或可作为推断声带真实尺寸的有价值工具。
  • 喉癌患者的建模数据与对照数据无统计学差异,表明在喉癌患者中亦可实现精确建模。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: The study aims to demonstrate the reproducibility and feasibility of creating a hemilaryngeal model with a medialized vocal fold (VF) using 3-dimensional (3D) modeling techniques in both healthy larynges and those affected by cancer. STUDY DESIGN: Three-dimensional modeling of human larynges. SETTING: Tertiary academic referral center and regenerative medicine laboratory. SUBJECTS AND METHODS: Computed tomography (CT) scans from 10 healthy control and 10 patients with laryngeal cancer were segmented and imported into 3D modeling software. The larynx was cut sagittally to create a hemilaryngeal model and the vocal fold medialized. Measurements were taken from the CT and 3D model data and compared. RESULTS: All control modeling data closely matched the CT data and were not statistically different from each other. There was a significant correlation between subglottic anteroposterior diameter and VF length (r2 = 0.78, P = .0008), and it may be a valuable tool to infer true VF dimension in cases where disruption has occurred. The modeling data from patients with cancer did not show statistical difference to the control data, showing that accurate modeling can also be achieved in patients with laryngeal cancer. CONCLUSION: CT scan-based 3D modeling of the larynx and VF is possible and reproducible. The results closely match those previously reported in the literature and can also be replicated in cases with laryngeal cancer. This study paves the way for future de novo fabricated laryngeal scaffolds that can be synthesized using 3D printers and tailored to meet surgical demands.

来源:Otolaryngol Head Neck Surg,查看原文。版权归原作者所有。

引用

  1. Hintze JM, Myers CE, McPhail MJ, et al. Computed Tomography Data to Generate a Reproducible, Anatomically Accurate Hemilaryngeal Model. Otolaryngol Head Neck Surg. 2019. PMID: 31013207. doi:10.1177/0194599819844974

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。