经口机器人手术术中图像导航的初步研究
本研究针对经口机器人手术(TORS)中图像导航受器械与体位限制的问题,研发并验证一套术中图像导航系统。用生物相容材料制作可透射线的开口器,在3具尸体的口咽与颈动脉放置Teflon珠,比较术前与术中体位CT扫描的靶点位移,并以开源Image-Guided Surgery Toolkit进行手术导航。结果显示下口咽靶点位移最大,将追踪器配准至术中扫描较配准至术前扫描可显著降低靶点配准误差(TRE)。
要点
- 下口咽靶点在术前与术中体位间位移最大。
- 配准至术中CT扫描较术前扫描可显著降低靶点配准误差。
- 该可透射线开口器与开源导航工具包构成的系统在尸体模型中验证可行。
核心结论
- 本研究描述了一套用于经口机器人手术的精确术中图像导航系统。
研究设计与样本
- 在3具尸体的口咽与颈动脉放置Teflon珠,用生物相容材料制作可透射线开口器,采集术前与术中体位CT扫描并测量靶点位移与靶点配准误差。
主要发现
- 下口咽靶点在术前与术中体位之间位移最大。
- 将追踪器配准至术中扫描较配准至术前扫描,靶点配准误差显著降低。
临床怎么用
- 提示TORS术中导航宜以术中体位扫描进行配准,并可借助可透射线开口器减少成像干扰。
局限性
- 研究为尸体初步研究,样本为3具尸体,尚未在临床患者中验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Intraoperative image guidance during transoral robotic surgery (TORS) is hampered by imaging-friendly instrumentation and intraoperative positioning. The purpose of this study was to develop and validate an accurate image-guidance system for TORS. METHODS: A custom radiolucent mouth retractor was fabricated from biocompatible material (Med-610; Stratasys, Minneapolis, MN). Teflon beads were placed in the oropharynx and carotid arteries of 3 cadavers. CT scans were obtained in the preoperative and intraoperative positions. Displacement of targets between preoperative and intraoperative scans was measured. Surgical navigation was based on the open-source Image-Guided Surgery Toolkit. Target registration error (TRE) was determined by measuring the distance between the tracker and bead registered to preoperative versus intraoperative scans. RESULTS: The inferior oropharyngeal targets demonstrated the greatest displacement between positions. A significant reduction in TRE was observed when registering the tracker to the intraoperative compared to the preoperative scan. CONCLUSION: This study describes an accurate intraoperative image-guidance system for TORS.
引用
- Ma AK, Daly M, Qiu J, et al. Intraoperative image guidance in transoral robotic surgery: A pilot study. Head Neck. 2017. PMID: 28755399. doi:10.1002/hed.24805
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。