文献速递鼻科

3D打印鼻窦口鼻道复合体与额窦模型用于内镜鼻窦手术培训的开发与验证

Development and validation of a 3D-printed model of the ostiomeatal complex and frontal sinus for endoscopic sinus surgery training.
PubMed 文献 · Int Forum Allergy Rhinol · 2017-06-14

本研究基于患者鼻窦CT影像,分割骨与软组织并采用模拟材料3D打印出鼻及鼻窦模拟器,由10名鼻科医师和10名耳鼻咽喉科住院医师完成6项预设任务并填写5分Likert量表问卷。参与者认为该模拟器可作为培训/教育工具有用(4.6/5),应纳入鼻科培训课程(4.5/5);鼻科医师组完成每项任务的平均时间低于住院医师组。

要点

  • 3D打印鼻及鼻窦模拟器基于患者CT影像分割骨与软组织制作。
  • 20名参与者(10名鼻科医师、10名住院医师)完成6项预设任务并接受问卷评估。
  • 参与者认为模拟器可作为培训工具有用(4.6/5),应纳入鼻科培训课程(4.5/5)。

核心结论

  • 描述了一种用于内镜鼻窦手术技能培训的新型3D打印模型的开发与验证;参与者认为该模拟器是有用的培训与教育工具,但进一步模型开发可改善结果。

研究设计与样本

  • 基于患者鼻窦CT影像导入3D可视化软件,分割骨与软组织结构,使用模拟骨与软组织材料打印模型。
  • 10名鼻科医师和10名耳鼻咽喉科住院医师共20名参与者在模拟器上完成6项预设任务(包括上颌窦开窗术和额隐窝解剖),并填写基于5分Likert量表的问卷。

主要发现

  • 参与者认为模拟器作为培训/教育工具有用(4.6/5),应作为鼻科培训课程的一部分整合(4.5/5)。
  • 视觉外观评分4.25/5,材料真实感评分3.8/5,手术体验评分3.9/5。
  • 鼻科医师组完成每项任务的平均时间低于住院医师组。

关键数值与推荐

  • 问卷采用5分Likert量表评分。
  • 参与者认为模拟器作为培训/教育工具有用性评分4.6/5,应整合入鼻科培训课程评分4.5/5。
  • 视觉外观4.25/5,材料真实感3.8/5,手术体验3.9/5。

临床怎么用

  • 该3D打印模型可作为内镜鼻窦手术技能的培训与教育工具,参与者支持将其整合入鼻科培训课程。

局限性

  • 原文未述局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Endoscopic sinus surgery poses unique training challenges due to complex and variable anatomy, and the risk of major complications. We sought to create and provide validity evidence for a novel 3D-printed simulator of the nose and paranasal sinuses. METHODS: Sinonasal computed tomography (CT) images of a patient were imported into 3D visualization software. Segmentation of bony and soft tissue structures was then performed. The model was printed using simulated bone and soft tissue materials. Rhinologists and otolaryngology residents completed 6 prespecified tasks including maxillary antrostomy and frontal recess dissection on the simulator. Participants evaluated the model using survey ratings based on a 5-point Likert scale. The average time to complete each task was calculated. Descriptive analysis was used to evaluate ratings, and thematic analysis was done for qualitative questions. RESULTS: A total of 20 participants (10 rhinologists and 10 otolaryngology residents) tested the model and answered the survey. Overall the participants felt that the simulator would be useful as a training/educational tool (4.6/5), and that it should be integrated as part of the rhinology training curriculum (4.5/5). The following responses were obtained: visual appearance 4.25/5; realism of materials 3.8/5; and surgical experience 3.9/5. The average time to complete each task was lower for the rhinologist group than for the residents. CONCLUSION: We describe the development and validation of a novel 3D-printed model for the training of endoscopic sinus surgery skills. Although participants found the simulator to be a useful training and educational tool, further model development could improve the outcome.

来源:Int Forum Allergy Rhinol,查看原文。版权归原作者所有。

引用

  1. Alrasheed AS, Nguyen LHP, Mongeau L, et al. Development and validation of a 3D-printed model of the ostiomeatal complex and frontal sinus for endoscopic sinus surgery training. Int Forum Allergy Rhinol. 2017. PMID: 28614638. doi:10.1002/alr.21960

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。