文献速递睡眠呼吸障碍咽喉与嗓音

3D打印个体化颏舌肌前移术治疗小下颌阻塞性睡眠呼吸暂停的初步疗效

[Preliminary efficacy of individualized genioglossus advancement with 3D printing in the treatment of obstructive sleep apnea with micrognathia].
PubMed 文献 · Zhonghua Er Bi Yan Hou Tou Jing Wai Ke Za Zhi · 2024-01-01

前瞻性队列研究纳入19例合并小下颌的成人OSA患者,行3D打印个体化颏舌肌前移术联合悬雍垂腭咽成形术,实际颏前移距离与术前计划一致;随访超过6个月的14例患者术后6个月AHI平均下降60.4%,手术应答率10/14,并发症少,面容满意度高。

要点

  • 19例患者实际颏前移距离(9.0±1.4)mm与术前计划(9.4±1.0)mm一致(t=0.81,P=0.427)。
  • 14例随访超过6个月者术后6个月AHI平均下降60.4%,治愈5例、显效5例,手术应答率10/14。
  • 术后暂时性颏麻木2例、下颌咬合无力1例;所有患者满意术后面容,13例认为更有吸引力。

核心结论

  • 3D打印个体化颏舌肌前移术联合悬雍垂腭咽成形术可有效降低合并小下颌的成人OSA患者AHI,手术并发症少,患者术后面容满意度高。

研究设计与样本

  • 前瞻性队列研究,收集2021年8月至2024年7月在中山大学孙逸仙纪念医院耳鼻咽喉头颈外科行3D打印个体化颏舌肌前移术的小下颌成人OSA患者病例资料。
  • 共19例合并下颌后缩的成人OSA患者完成悬雍垂腭咽成形术联合颏舌肌前移术,男16例、女3例,年龄(35.9±6.7)岁,体质量指数(23.8±3.1)kg/m2。
  • 比较手术前后多导睡眠监测和头影测量颏前移指标的改变,记录患者主观症状、外观评价及手术并发症,手术前后数据比较采用配对设计t检验。

主要发现

  • 19例患者实际颏前移距离(9.0±1.4)mm与术前计划(9.4±1.0)mm一致(t=0.81,P=0.427)。
  • 14例随访超过6个月的患者术后6个月AHI平均下降60.4%,治愈5例(5/14),显效5例(5/14),手术应答率10/14。
  • 所有患者均满意术后面容改变,13例患者认为更有吸引力。
  • 术后暂时性颏麻木2例,下颌咬合无力1例。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Objective: To investigate the preliminary efficacy of 3D printed individualized genioglossus advancement (GA) for the treatment of obstructive sleep apnea (OSA) in adults with micrognathia. Methods: The OSA patients with retropalatal and retroglossal collapses due to micrognathia underwent 3D printed individualized GA combined with Uvulopalatopharyngoplasty(UPPP) in Department of Otolaryngology, Head and Neck Surgery, Sun Yat-sen Memorial Hospital, Sun Yat-sen University. Clinical data including pre-and post-operative polysomnography (PSG), cephalometric measurements of genioglossus advancement, patient-reported symptom and surgical complications were collected. A comparison of pre-and post-operative data was conducted using paired t-tests. Results: Nineteen OSA patients with micrognathia successfully underwent 3D printed individualized GA combined with UPPP, and achieved an actual mean genioglossus advancement distance of (9.0±1.4) mm compared to the planned distance of (9.4±1.0) mm preoperatively (t=0.81, P=0.427). Among the 14 patients followed up for more than 6 months, the mean AHI reduced by 60.4% at 6 months postoperatively, with 5 cases (5/14) cured and 5 cases (5/14) showing significant improvement, resulting in an overall surgical response rate of 10/14. All patients expressed satisfaction with their postoperative facial appearance, with 13 cases perceiving an improvement in attractiveness. Two patients reported temporary genial numbness, and one patient experienced temporary mandibular occlusal asthenia. Conclusion: The 3D printed individualized GA combined with UPPP effectively reduces AHI in adult OSA patients with micrognathia, accompanied by a low incidence of surgical complications and high patient satisfaction regarding postoperative facial appearance. 目的: 探讨3D打印个体化颏舌肌前移术(genioglossus advancement,GA)治疗合并小下颌的成人阻塞性呼吸暂停(obstructive sleep apnea,OSA)的初步疗效。 方法: 该研究为前瞻性队列研究,收集2021年8月至2024年7月在中山大学孙逸仙纪念医院耳鼻咽喉头颈外科行3D打印个体化GA的小下颌成人OSA患者病例资料。比较手术前后多导睡眠监测和头影测量颏前移指标的改变,并记录患者主观症状和外观评价,以及手术并发症。手术前后数据的比较采用配对设计t检验。 结果: 共19例合并下颌后缩的成人OSA患者顺利完成悬雍垂腭咽成形术(uvulopalatopharyngoplasty,UPPP)联合GA手术,男16例,女3例,年龄(35.9±6.7)岁,体质量指数(23.8±3.1)kg/m2。19例患者实际颏前移距离(9.0±1.4)mm与术前计划(9.4±1.0)mm一致(t=0.81,P=0.427);其中14例患者术后6个月呼吸暂停低通气指数(apnea hypopnea index,AHI)平均下降60.4%,治愈5例(5/14),显效5例(5/14),手术应答率10/14。所有患者均满意术后面容改变,13例患者认为更有吸引力;术后暂时性颏麻木2例,下颌咬合无力1例。 结论: 3D打印个体化GA联合UPPP可有效降低合并小下颌的成人OSA患者AHI,手术并发症少,患者术后面容满意度高。.

来源:Zhonghua Er Bi Yan Hou Tou Jing Wai Ke Za Zhi,查看原文。版权归原作者所有。

引用

  1. Chen RH, Liang FY, Han P, et al. [Preliminary efficacy of individualized genioglossus advancement with 3D printing in the treatment of obstructive sleep apnea with micrognathia]. Zhonghua Er Bi Yan Hou Tou Jing Wai Ke Za Zhi. 2024. PMID: 39631801. doi:10.3760/cma.j.cn115330-20240311-00131

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。