文献速递口腔修复与种植

增材与减材计算机辅助制造种植修复体的生产时间、效果与成本:系统综述

Production time, effectiveness and costs of additive and subtractive computer-aided manufacturing (CAM) of implant prostheses: A systematic review.
PubMed 文献 · Clin Oral Implants Res · 2021-01-01

该系统综述检索1990年至2020年6月的临床研究,评估增材与减材CAM制作种植修复体的生产时间、效果与成本。共纳入9项研究,其中8项报告减材CAM、1项报告增材CAM;无科学证据比较两种数字化流程的生产时间、效果与成本,减材CAM单冠组件制作时间8.2-25分钟,后处理耗时可达530分钟。

要点

  • 减材CAM单颗种植冠组件制作时间8.2-25分钟,后处理可达530分钟。
  • 整体式CAD-CAM种植冠比饰面冠椅旁调整更少(51% vs 93%)。
  • 目前无证据比较增材与减材CAM的生产时间、效果与成本。

核心结论

  • 无科学证据比较增材CAM与减材CAM数字化流程的生产时间、效果与成本。
  • 两种技术的后处理均可能显著增加生产时间。
  • 就效果而言,整体式CAD-CAM种植冠可能优于饰面CAD-CAM冠。

研究设计与样本

  • 系统综述,电子检索Medline、Embase和Cochrane数据库1990年至2020年6月的临床研究。
  • 共纳入9项临床研究,其中8项报告减材CAM,1项报告增材CAM。
  • 8项研究涉及单颗种植冠的修复体和辅助组件的减材CAM。
  • 1项研究应用增材CAM制作种植杆原型。

主要发现

  • CAD过程时间:种植模型4.9-11.8分钟,基台19.7-32.7分钟,冠11.1-37.6分钟。
  • 减材CAM单颗种植冠组件(基台/冠)时间范围为8.2至25分钟。
  • 后处理(如烧结)耗时可达530分钟。
  • 交付时,整体式/饰面CAD-CAM种植冠需椅旁调整的比例分别为51%/93%,需技工室调整的比例分别为11%/19%。

临床怎么用

  • 选择CAD-CAM种植冠时,整体式设计可能减少椅旁调整需求。
  • 规划生产时间时应充分考虑后处理(如烧结)的耗时。
  • 目前证据不足以推荐增材CAM或减材CAM作为优选流程。

局限性

  • 纳入研究数量少(共9项),且仅1项涉及增材CAM。
  • 缺乏比较增材与减材CAM生产时间、效果与成本的直接证据。
  • 研究间异质性可能影响结果解读。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: To systematically review the dental literature for clinical studies reporting on production time, effectiveness and/or costs of additive and subtractive computer-aided manufacturing (CAM) of implant prostheses. MATERIALS AND METHODS: A systematic electronic search for clinical studies from 1990 until June 2020 was performed using the online databases Medline, Embase and Cochrane. Time required for the computer-aided design (CAD) process, the CAM process, and the delivery of the CAD-CAM prostheses were extracted. In addition, articles reporting on the effectiveness and the costs of both manufacturing technologies were included. RESULTS: Nine clinical studies were included reporting on subtractive CAM (s-CAM; 8 studies) and additive CAM (a-CAM; 1 study). Eight studies reported on the s-CAM of prosthetic and auxiliary components for single implant crowns. One study applied a-CAM for the fabrication of an implant bar prototype. Time was provided for the CAD process of implant models (range 4.9-11.8 min), abutments (range 19.7-32.7 min) and crowns (range 11.1-37.6 min). The time for s-CAM of single implant crown components (abutment/crown) ranged between 8.2 and 25 min. Post-processing (e.g. sintering) was a time-consuming process (up to 530 min). At delivery, monolithic/veneered CAD-CAM implant crowns resulted in additional adjustments chairside (51%/93%) or labside (11%/19%). CONCLUSIONS: No scientific evidence exists on production time, effectiveness and costs of digital workflows comparing s-CAM and a-CAM. For both technologies, post-processing may substantially contribute to the production time. Considering effectiveness, monolithic CAD-CAM implant crowns may be preferred compared to veneered CAD-CAM crowns.

来源:Clin Oral Implants Res,查看原文。版权归原作者所有。

引用

  1. Mühlemann S, Hjerppe J, Hämmerle CHF, et al. Production time, effectiveness and costs of additive and subtractive computer-aided manufacturing (CAM) of implant prostheses: A systematic review. Clin Oral Implants Res. 2021. PMID: 34642980. doi:10.1111/clr.13801

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。