聚氨酯丙烯酸酯低聚物与再矿化纳米填料改良TEGDMA树脂渗透剂的物理性能与再矿化潜力
本研究用聚氨酯丙烯酸酯低聚物(PUA)和两种再矿化填料(氟羟基磷灰石FHA、掺氟生物活性玻璃FD-BG)改性实验性TEGDMA基树脂渗透剂。结果显示PUA提升机械性能并降低吸水率与溶解度,FD-BG显著增强釉质抗脱矿能力(p≤0.001),FHA效果无统计学意义(p>0.05)。结论认为PUA+TEGDMA+FD-BG/FHA复合材料可作为纯TEGDMA的替代材料。
要点
- PUA改性TEGDMA可提高机械性能并降低吸水率与溶解度
- FD-BG填料显著增强釉质抗脱矿能力(p≤0.001)
- FHA填料改善抗脱矿但无统计学意义(p>0.05)
核心结论
- PUA+TEGDMA+FD-BG/FHA复合材料因机械性能更好、吸水率与溶解度更低且具再矿化潜力,可作为纯TEGDMA的替代材料用于釉质渗透。
研究设计与样本
- 合成PUA低聚物,将10%PUA与88%TEGDMA混合制备实验树脂渗透剂,并表征水接触角、渗透系数与渗透深度。
- 合成FHA与FD-BG填料,各以5%比例加入树脂渗透剂制备纳米填料树脂,评估转化度、机械性能、吸水率与溶解度及离子释放。
主要发现
- PUA加入TEGDMA提高了机械性能并降低了吸水率与溶解度。
- FD-BG填料加入树脂渗透剂显著改善釉质样本抗脱矿能力,与其他组相比p≤0.001。
- FHA填料也改善抗脱矿能力,但变化无统计学意义(p>0.05)。
临床怎么用
- 含再矿化潜力、更低吸水率与溶解度及更高机械性能的树脂渗透剂可能有助于早期龋损的管理。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This study aimed to modify an experimental triethylene glycol dimethacrylate (TEGDMA) based resin infiltrant using PUA oligomer and two remineralising fillers, including fluorohydroxyapatite (FHA) and fluoride-doped bioactive glass (FD-BG), to improve the mechanical and physical properties and induce remineralising potential. MATERIALS AND METHODS: The polyurethane acrylate oligomer (PUA) was synthesised and characterised. Experimental resin infiltrant was prepared by mixing 10% of synthesised PUA with 88% TEGDMA. Water contact angle, penetration coefficient, and penetration depth were then measured. The FHA and FD-BG fillers were synthesised and characterised. To prepare nano-filled resin infiltrant, 5% of each powder was mixed with the prepared resin infiltrant. The prepared resin infiltrants were characterised to evaluate their degree of conversion, mechanical properties, water sorption, and solubility. The ion release of filled resin was also assessed. The non-infiltrated and infiltrated enamel specimens underwent fourteen days of pH-cycling, and a surface microhardness was done to assess the resistance to demineralisation. RESULTS: The results showed that the addition of PUA to TEGDMA increased the mechanical properties and decreased water sorption and solubility. The addition of synthesised FD-BG fillers to resin infiltrant significantly improved the resistance to demineralisation of enamel samples compared with other groups (p ≤ 0.001). The FHA fillers also improved the resistance to demineralisation; however, the produced changes were not statistically meaningful (p > 0.05). CONCLUSIONS: Based on the results, the PUA+TEGDMA+ FD-BG/FHA composite can be used as an alternative material for pure TEGDMA in enamel infiltration approaches owing to its better mechanical properties, lower water sorption and solubility, and also remineralisation potential. CLINICAL SIGNIFICANCE: A resin infiltrant with remineralisation potential, lower water sorption and solubility and higher mechanical properties may enhance the management of early caries lesions.
引用
- Hashemian A, Shahabi S, Behroozibakhsh M, et al. A modified TEGDMA-based resin infiltrant using polyurethane acrylate oligomer and remineralising nano-fillers with improved physical properties and remineralisation potential. J Dent. 2021. PMID: 34530057. doi:10.1016/j.jdent.2021.103810
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。