三嗪-甲基丙烯酸酯单体加入牙科树脂的理化与生物学评价
本研究将2.5或5 wt.%的甲基丙烯酸酯单体TAT加入基础树脂,评估其理化与生物学性能。结果显示5 wt.% TAT提高KHN、抗软化及UTS,且抗菌活性随浓度增加;2.5 wt.% TAT无细胞毒性且不改变理化性能,适合赋予树脂抗菌活性。
要点
- 2.5 wt.% TAT加入树脂不改变理化性能且无细胞毒性。
- 5 wt.% TAT提高硬度、抗软化及拉伸强度,但降低细胞活力。
- TAT浓度越高,抗变形链球菌生物膜活性越强。
核心结论
- 添加2.5 wt.% TAT可在不改变理化性能或损害细胞毒性的情况下赋予牙科树脂抗菌活性。
研究设计与样本
- 配制含2.5或5 wt.% TAT的混合树脂,并以无TAT组为对照,评估理化及生物学性能。
主要发现
- DC无差异(p=0.676)。
- 5 wt.% TAT组KHN更高(p<0.001)、抗溶剂软化更强(p<0.001)、UTS更高(p=0.04)。
- 接触角(水p=0.106;α-溴萘p=0.454)和SFE(p=0.172)无显著差异。
- TAT浓度越高抗菌活性越强(p<0.001)。
- G2.5%无细胞毒性(p>0.05),G5%降低细胞活力(p<0.05)。
关键数值与推荐
- TAT添加量为2.5或5 wt.%。
- DC无差异(p=0.676);5 wt.% TAT组KHN(p<0.001)、抗软化(p<0.001)、UTS(p=0.04)均更高。
- 接触角水(p=0.106)、α-溴萘(p=0.454)、SFE(p=0.172)无显著差异。
- 抗菌活性随TAT浓度增加而升高(p<0.001)。
- G2.5%无细胞毒性(p>0.05),G5%细胞活力降低(p<0.05)。
临床怎么用
- 2.5 wt.% TAT可用于开发具有抗菌活性的牙科树脂材料。
- 需进一步开展更高致龋挑战的评估以分析配方材料。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This study aimed to (1) formulate blend resins with 2.5 or 5 wt.% of the methacrylate monomer 1,3,5-triacryloylhexahydro-1,3,5-triazine (TAT), and (2) to evaluate the blend resins regarding the physicochemical and biological properties. METHODS: The base resin was formulated mixing 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with photoinitiator/co/initiator system. TAT was added at 2.5 (G2.5%) or 5 (G5%) wt.%, and a group without TAT was used as control (Gctrl). The resins were analyzed for degree of conversion (DC), Knoop hardness (KHN), softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle, surface free energy (SFE), antibacterial activity against Streptococcus mutans biofilm formation, and cytotoxicity against human keratinocytes. RESULTS: There was no difference for the DC (p = 0.676). The addition of TAT at 5 wt.% induced higher KHN (p<0.001), higher resistance against softening in solvent (p<0.001), and higher UTS (p = 0.04). There were no statistically significant differences for contact angle with water (p = 0.106), α-bromonaphtalene (p = 0.454), and SFE (p = 0.172). The higher the TAT concentration, the higher the antibacterial activity (p<0.001). G2.5% showed no cytotoxicity compared to Gctrl (p>0.05), and G5% induced lower cell viability (p<0.05). CONCLUSIONS: The addition of 2.5 wt.% of TAT is suitable for conveying antibacterial activity for dental resins without changing the physicochemical properties or impairing the cytotoxic effect. CLINICAL RELEVANCE: Methacrylate monomers that decrease bacterial viability and copolymerize with the resin matrix are exciting approaches to developing therapeutic materials. TAT showed promising properties to may hamper and prevent carious lesions when incorporated into dental materials. Further evaluations with higher cariogenic challenges will be carried to analyze the formulated materials.
引用
- Garcia IM, Leitune VCB, Rücker VB, et al. Physicochemical and biological evaluation of a triazine-methacrylate monomer into a dental resin. J Dent. 2021. PMID: 34560223. doi:10.1016/j.jdent.2021.103818
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。