文献速递口腔颌面外科口腔修复与种植

分层深度学习在锥形束CT下颌骨自动分割中的应用

Layered deep learning for automatic mandibular segmentation in cone-beam computed tomography.
PubMed 文献 · J Dent · 2021-08-20

本研究开发并验证了一种分层深度学习算法,可从锥形束CT(CBCT)图像自动生成下颌骨三维表面模型。与半自动分割(临床标准)相比,AI分割时间从1218.4秒降至17秒,且一致性更高,精度相当。

要点

  • AI分割仅需17秒,比半自动分割快71.3倍,比用户精修AI分割快2.7倍。
  • AI分割默认具有一致性,用户精修AI分割的组内和组间IoU均高于半自动分割。
  • 以半自动分割为基准,AI和用户精修AI的IoU分别为94.6%和94.4%,精度相似。

核心结论

  • 分层3D U-Net深度学习算法可自动分割CBCT下颌骨,提高时间效率、减少操作者误差,且精度与临床标准相当。

研究设计与样本

  • 开发并验证研究,使用两个3D U-Net卷积网络组合的云AI模型,训练集为160例正颌手术患者的全颅CBCT扫描(70例术前,90例术后),测试集为15例术前和15例术后扫描。

主要发现

  • 半自动分割平均耗时1218.4秒,用户精修AI分割耗时456.5秒(p<0.0001,减少2.7倍),AI分割仅需17秒(减少71.3倍)。
  • 用户精修AI分割的组内IoU为99.5%,半自动分割为96.9%;组间IoU分别为99.6%和94.6%。
  • 以半自动分割为基准,AI和用户精修AI的IoU分别为94.6%和94.4%,所有精度指标相似。

关键数值与推荐

  • 一致性指标包括交并比(IoU)、Dice相似系数(DSC)、Hausdorff距离(HD)、绝对体积差和均方根(RMS)距离。
  • 用户精修AI分割在所有一致性指标上均优于半自动分割。

临床怎么用

  • AI分割可快速生成下颌骨三维模型,减少人工操作时间和用户引入的误差,适合临床工作流程。
  • 用户精修AI分割可作为半自动分割的替代方案,提高一致性和效率。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: To develop and validate a layered deep learning algorithm which automatically creates three-dimensional (3D) surface models of the human mandible out of cone-beam computed tomography (CBCT) imaging. MATERIALS & METHODS: Two convolutional networks using a 3D U-Net architecture were combined and deployed in a cloud-based artificial intelligence (AI) model. The AI model was trained in two phases and iteratively improved to optimize the segmentation result using 160 anonymized full skull CBCT scans of orthognathic surgery patients (70 preoperative scans and 90 postoperative scans). Finally, the final AI model was tested by assessing timing, consistency, and accuracy on a separate testing dataset of 15 pre- and 15 postoperative full skull CBCT scans. The AI model was compared to user refined AI segmentations (RAI) and to semi-automatic segmentation (SA), which is the current clinical standard. The time needed for segmentation was measured in seconds. Intra- and inter-operator consistency were assessed to check if the segmentation protocols delivered reproducible results. The following consistency metrics were used: intersection over union (IoU), dice similarity coefficient (DSC), Hausdorff distance (HD), absolute volume difference and root mean square (RMS) distance. To evaluate the match of the AI and RAI results to those of the SA method, their accuracy was measured using IoU, DSC, HD, absolute volume difference and RMS distance. RESULTS: On average, SA took 1218.4s. RAI showed a significant drop (p<0.0001) in timing to 456.5s (2.7-fold decrease). The AI method only took 17s (71.3-fold decrease). The average intra-operator IoU for RAI was 99.5% compared to 96.9% for SA. For inter-operator consistency, RAI scored an IoU of 99.6% compared to 94.6% for SA. The AI method was always consistent by default. In both the intra- and inter-operator consistency assessments, RAI outperformed SA on all metrics indicative of better consistency. With SA as the ground truth, AI and RAI scored an IoU of 94.6% and 94.4%, respectively. All accuracy metrics were similar for AI and RAI, meaning that both methods produce 3D models that closely match those produced by SA. CONCLUSION: A layered 3D U-Net architecture deep learning algorithm, with and without additional user refinements, improves time-efficiency, reduces operator error, and provides excellent accuracy when benchmarked against the clinical standard. CLINICAL SIGNIFICANCE: Semi-automatic segmentation in CBCT imaging is time-consuming and allows user-induced errors. Layered convolutional neural networks using a 3D U-Net architecture allow direct segmentation of high-resolution CBCT images. This approach creates 3D mandibular models in a more time-efficient and consistent way. It is accurate when benchmarked to semi-automatic segmentation.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Verhelst PJ, Smolders A, Beznik T, et al. Layered deep learning for automatic mandibular segmentation in cone-beam computed tomography. J Dent. 2021. PMID: 34425172. doi:10.1016/j.jdent.2021.103786

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。