文献速递牙体牙髓病

金属伪影减少工具在检测下颌磨牙根管峡部中的评估

Assessment of the Metal Artifact Reduction Tool for the Detection of Root Isthmus in Mandibular Molars with Intraradicular Posts in Cone-beam Computed Tomographic Scans.
PubMed 文献 · J Endod · 2021-07-12

本研究以微计算机断层扫描为金标准,评估锥形束CT中金属伪影减少工具在不同视野下检测含根管内桩的下颌磨牙根管峡部的性能。结果显示视野大小不影响MAR工具性能,但在金属桩和纤维桩组中,MAR工具「禁用」和「低」模式的准确度更高,而「正常」和「高」模式禁用于此目的。

要点

  • MAR工具「正常」和「高」模式禁用于检测含桩磨牙的根管峡部。
  • 视野大小不影响MAR工具检测根管峡部的性能。
  • 含金属桩或纤维桩时,MAR「禁用」或「低」模式准确度更高。

核心结论

  • 视野大小不影响MAR工具诊断含根管内桩磨牙根管峡部的性能。
  • MAR工具「正常」和「高」模式禁用于此诊断目的。

研究设计与样本

  • 样本分为三组:无桩组(n=10)、预制成金属桩组(n=9)、纤维桩组(n=9)。
  • 采用8种扫描协议,变化视野大小(10×5.5 cm和5×5.5 cm)和MAR工具模式(禁用、低、正常、高)。

主要发现

  • 观察者内和观察者间一致性为中等至高度。
  • 所有组中正确诊断频率在不同图像采集协议间有显著差异(P < .05)。
  • 无桩组中各协议间的准确度、灵敏度和特异度无差异。
  • 金属桩和纤维桩组中,MAR工具「禁用」和「低」模式的准确度值更高,与视野大小无关。
  • 金属桩组中,灵敏度值也呈现相同趋势(P < .05)。

临床怎么用

  • 检测含根管内桩下颌磨牙的根管峡部时,应使用MAR工具的「禁用」或「低」模式。
  • 避免使用MAR工具的「正常」和「高」模式进行根管峡部检测。

局限性

  • 体外研究,样本量有限(每组9-10颗牙)。
  • 仅评估了下颌磨牙,结论不能推广至其他牙位。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: This study evaluated the performance of the metal artifact reduction (MAR) tool in cone-beam computed tomographic scans using different fields of view (FOVs) in the detection of a root isthmus in mandibular molars with intraradicular posts. METHODS: Twenty-eight teeth were scanned by micro-computed tomographic imaging (gold standard images). Thereafter, specimens were allocated into the following groups: gutta-percha (teeth without posts, n = 10), a prefabricated metal post (n = 9), and a fiberglass post (n = 9). Cone-beam computed tomographic scans were taken using 8 acquisition protocols, varying the size of the FOV (10 × 5.5 cm and 5 × 5.5 cm) and the MAR tool (disabled, low, normal, and high modes). A root isthmus was evaluated considering a 5-point scale. Data were analyzed considering a 5% significance level. RESULTS: Intra- and interexaminer agreement varied from moderate to substantial. The frequency of correct diagnosis varied significantly in all groups regardless of the image acquisition protocol selected (P < .05). In the gutta-percha group, there was no difference in the accuracy, sensitivity, and specificity values between the tested protocols. In the metal and fiberglass post groups, the accuracy values were higher with the "disabled" and "low" modes of the MAR tool regardless of the FOV size. This was also observed for the sensitivity values in the metal post group (P < .05). CONCLUSIONS: The size of the FOV did not affect the performance of the MAR tool in the diagnosis of a root isthmus in molars with intraradicular posts. Our findings suggest that the use of the tool in the "normal" and "high" modes is contraindicated for this purpose.

来源:J Endod,查看原文。版权归原作者所有。

引用

  1. Barros de Oliveira ML, Junqueira RB, Kamburoğlu K, et al. Assessment of the Metal Artifact Reduction Tool for the Detection of Root Isthmus in Mandibular Molars with Intraradicular Posts in Cone-beam Computed Tomographic Scans. J Endod. 2021. PMID: 34265325. doi:10.1016/j.joen.2021.07.003

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。